Unbeatable engine sale 2009
#1
Unbeatable engine sale 2009
I was waiting until we completed the new showroom until we announced our changes, but here it is.
We are in the process of rearranging our shop. Our North Richland Hills location in the DFW area continues to provide sales and service. We have 6 service bays and the dyno here. All customer contact is handled at this location. We moved our engine builds and machine work to a new location to allow for a showroom improvement and expansion of the service area.
What does this mean to you? No change. Although we moved the engine building and head work a new location all sales is at the same North Richland Hills location. The engines are still built by our builder Chris Fowler. All parts, engines and service will be picked up or shipped out of the North Richland Hills location.
Stop by and visit but pardon the mess. We should complete the changes in a few weeks.
Thanks
Arvil
817-503-8947
UNBEATABLE Engine SALE 2009.
________________________________________
The sale is back due to popular demand. Don’t miss out on this line up of power packed engines. These short blocks combined with our head/cam packages Stage II, Stage III, and Race can produce the power you need to be the best!! All are balanced and blueprinted by a SAM racing certified machinist. Get the best!!!
Check out the Callies upgraded engines too!!!!!!!!!
Upgraded Callies Engine packages!!!!!!!!!!!!
________________________________________
Pricing on Upgraded Callies short block package:
402 LS2 Aluminum $ 4250
408 LQ9 Iron $ 3750
418 LS3 Aluminum $ 4450
454 LSX Iron $ 6350
These engines have Callies Compstar crankshafts, Callies H-beam 6.125 rods with ARP 2000 bolts, ARP main studs, Clevite H main and rod bearings, Diamond, JE or Mahle Pistons, all necessary plugs, and are balanced and blueprinted by our SAM Racing certified machinist using Sunnen Machine Products to produce the best in performance and reliability. Call for Piston choices. We can build for NA, forced induction or nitrous!!!
The Eagle RA short block sale is still available below if you prefer.........
PLEASE DIRECT ALL QUESTIONS OR ORDERS TO XMAN OR CALL 817-503-8947!!! THANK YOU!
408 LQ9 iron block, Eagle forged crank, Eagle forged rods, GM main bolts, and Mahle forged pistons. 3295$
403 LS2 aluminum block, Eagle forged crank, Eagle forged rods, GM main bolts ,and Diamond, JE or Arias pistons. 3950$
418 6.2 aluminum block, Eagle forged crank, Eagle forged rods, GM main bolts, and Diamond pistons 4195$
347 5.3 IRON block, stock GM crank, Eagle H- beam rods, and Mahle forged pistons. 2495$
347 5.7 aluminum block, stock GM crank, Eagle forged rods, Diamond forged pistons 2995$
XMAN
Xtreme Horsepower
5102 Commercial Drive
North Richland Hills, TX 76180
817-503-8947
We are in the process of rearranging our shop. Our North Richland Hills location in the DFW area continues to provide sales and service. We have 6 service bays and the dyno here. All customer contact is handled at this location. We moved our engine builds and machine work to a new location to allow for a showroom improvement and expansion of the service area.
What does this mean to you? No change. Although we moved the engine building and head work a new location all sales is at the same North Richland Hills location. The engines are still built by our builder Chris Fowler. All parts, engines and service will be picked up or shipped out of the North Richland Hills location.
Stop by and visit but pardon the mess. We should complete the changes in a few weeks.
Thanks
Arvil
817-503-8947
UNBEATABLE Engine SALE 2009.
________________________________________
The sale is back due to popular demand. Don’t miss out on this line up of power packed engines. These short blocks combined with our head/cam packages Stage II, Stage III, and Race can produce the power you need to be the best!! All are balanced and blueprinted by a SAM racing certified machinist. Get the best!!!
Check out the Callies upgraded engines too!!!!!!!!!
Upgraded Callies Engine packages!!!!!!!!!!!!
________________________________________
Pricing on Upgraded Callies short block package:
402 LS2 Aluminum $ 4250
408 LQ9 Iron $ 3750
418 LS3 Aluminum $ 4450
454 LSX Iron $ 6350
These engines have Callies Compstar crankshafts, Callies H-beam 6.125 rods with ARP 2000 bolts, ARP main studs, Clevite H main and rod bearings, Diamond, JE or Mahle Pistons, all necessary plugs, and are balanced and blueprinted by our SAM Racing certified machinist using Sunnen Machine Products to produce the best in performance and reliability. Call for Piston choices. We can build for NA, forced induction or nitrous!!!
The Eagle RA short block sale is still available below if you prefer.........
PLEASE DIRECT ALL QUESTIONS OR ORDERS TO XMAN OR CALL 817-503-8947!!! THANK YOU!
408 LQ9 iron block, Eagle forged crank, Eagle forged rods, GM main bolts, and Mahle forged pistons. 3295$
403 LS2 aluminum block, Eagle forged crank, Eagle forged rods, GM main bolts ,and Diamond, JE or Arias pistons. 3950$
418 6.2 aluminum block, Eagle forged crank, Eagle forged rods, GM main bolts, and Diamond pistons 4195$
347 5.3 IRON block, stock GM crank, Eagle H- beam rods, and Mahle forged pistons. 2495$
347 5.7 aluminum block, stock GM crank, Eagle forged rods, Diamond forged pistons 2995$
XMAN
Xtreme Horsepower
5102 Commercial Drive
North Richland Hills, TX 76180
817-503-8947
Last edited by Xman; 05-12-2009 at 03:35 PM. Reason: price change
#3
What about a 370 short block with a stock GM crank?
What would final price be on a 370 with 10cc dished pistons with L92 valve reliefs shipped to 32324 (Hospital receiving dock)?
What about final price on the 408 Eagle short block with the same pistons?
What would final price be on a 370 with 10cc dished pistons with L92 valve reliefs shipped to 32324 (Hospital receiving dock)?
What about final price on the 408 Eagle short block with the same pistons?
#4
Stock GM crank
Clevite H bearings
Mahle flat top pistons
Eagle H beam rods
ARP main studs
LQ9 370 same as above with custom pistons $2975
LQ9 408 with custom pistons $3550
Eagle 4340 crank
Clevite H bearings
Diamond custom pistons
Eagle H beam rods
ARP main studs
Crate and Shipping fee $185.
Thanks for checking with Xtreme
Arvil
817-503-8947
Trending Topics
#11
We can provide you with a LS1/6 383. The base engine has a Eagle forged crank, Eagle H beam rods, Forged pistons (JE, Diamond, Mahle), Clevite H rod and main bearings, ARP main studs, balanced and blueprinted with a new GM block.
Base engine has CR of 10.8 with 66cc heads. Other pistons are available for higher or lower boost pistons CR.
We ship to all of the US and internationally. If you have a shop we can discount for you.
Thanks for checking with Xtreme Horsepower.
Our Shop car Quicksilver holds the Pump gas NA LS1 record at 9.60 and 139mph. We know how to make you more power.
Arvil
817-503-8947
Base engine has CR of 10.8 with 66cc heads. Other pistons are available for higher or lower boost pistons CR.
We ship to all of the US and internationally. If you have a shop we can discount for you.
Thanks for checking with Xtreme Horsepower.
Our Shop car Quicksilver holds the Pump gas NA LS1 record at 9.60 and 139mph. We know how to make you more power.
Arvil
817-503-8947
#16
How much for stock cube ls2 aluminum block stock crank(or whatevers cheapest) forged rods and dished forged pistons? I have 72cc heads and would like to be around 9.1 comp... Hellfire rings also? And do you offer the reluctor wheel to make it work in an f-body?
#17
Originally Posted by Subliminal Hit
How much for stock cube ls2 aluminum block stock crank(or whatevers cheapest) forged rods and dished forged pistons? I have 72cc heads and would like to be around 9.1 comp... Hellfire rings also? And do you offer the reluctor wheel to make it work in an f-body?
I have the same questions except for a 6.2ltr block with stock crank, basic forged rods/pistons and heads and intake....
#18
Damn, I put a deposit on a used 370 because I expected the sale to end before I got my refund........
Oh well the only difference I would have made is getting pistons with both LS1 and L92 valve reliefs.
Good luck John, this looks like a good guy to do business with. Let me know what you decide on!
Oh well the only difference I would have made is getting pistons with both LS1 and L92 valve reliefs.
Good luck John, this looks like a good guy to do business with. Let me know what you decide on!
#20
Damn, I put a deposit on a used 370 because I expected the sale to end before I got my refund........
Oh well the only difference I would have made is getting pistons with both LS1 and L92 valve reliefs.
Good luck John, this looks like a good guy to do business with. Let me know what you decide on!
Oh well the only difference I would have made is getting pistons with both LS1 and L92 valve reliefs.
Good luck John, this looks like a good guy to do business with. Let me know what you decide on!
Last edited by GEARHED; 03-12-2009 at 11:31 AM.