The TB's are completely reworked and have everything altered to gain the most air flow possible and they don't look too bad also.

The following modifications are done to the TB:
*Ported to 75mm and Polished Inside
*Inlet is shaped to reduce turbulence
*TB base is Powdercoated any color
*Front of Throttle Shaft is cut off for improved flow
*Throttle Shaft is Powdercoated like chrome
*Return Spring is polished/clear coated
*Throttle blade screws are shortened
*Blade is polished
*Hole is Epoxied in and contoured for best flow
*Copper tubing is used for accuracy for the IAC & PCV Holes
*Throttle Stop is ground to fully open the blade
*Rear of TB is surfaced for a clean fit/finish to the Manifold

This is the breakdown of the prices and options.

Ported with Stock Appearance $110 (normally $130)
Ported/Powdercoated $130 (normally $150)
Ported/Powdercoated WITH CHOME SHAFT/SPRING $165 (normally $190)
***OUTRIGHT PURCHASE OF TB, NO CORE REQUIRED $100 ADDITIONAL!!!!***
***WE HAVE 98/99 AS WELL AS 00+ TB CORES, WE HAVE YOU COVERED!***

We have many pictures of various colors and options for the TB on our webshots page. The last few pics show the NEW CHROME SHAFT/SPRING OPTION!!!!

http://community.webshots.com/user/jantzer98ss

We accept paypal, money orders, or cashier's checks.

Feel free to email any questions you might have to jantzerperformance@hotmail.com.

 

how much just for a powdercoated TB, not ported?

 

I will powdercoat one for $50.

Scott

 

Is there a core charge, or do I send you my TB?

 

Core charge is $150, but you can send in your TB if you want. Whatever is convenient for you. It's also $35 *special* for the chrome shaft/spring upgrade if you want.

Scott

 

so 235 for powdercoated TB, chrome shaft/spring and core charge. Do you accept paypa?

 

For an outright purchase (no core required) it's $230 or $265 with the chrome shaft. If you will be sending in your core and want to do it on a core exchange basis, it's $130 or $165 AND $150 core charge upfront (which will be refunded).

I do accept paypal to jantzerperformance@hotmail.com.

 

What kind of turn around time if I sent you my TB and you do the works?

 

i would also like to know the turn around time

 

Right now I'm pretty well caught up so about 3-4 days. Usually the following friday or monday after you order because the epoxy has to cure for 2 days.

 

That's fast. Any special tuning after porting?

 

Tuning shouldn't be affected much.

 

I wish i wouldn't have just bought a pulley from a buddy
GRRRR

Josh S.

 

Hey Scott, Can you Pm me a quote for a Ported TB/Powdercoated Hugger Orange with Chrome Out right with a matching powdercoated Set of Maft ends. Ive got some plastic breathless performance ones on now, but i still have some Brand new Stockers i can send you. Thanks
Scott
Shipping to 39503

 

Scott,
you got mail

 

I polished my TB, so I want ot keep it. What would it cost to port it & powder coat it to look like chrome? I would also like the chrome-look on the spring & shaft. (& I'll need a new return spring, I nicked mine when I did the bump stop mod)

 

Kooyrazy:

PM'd you, Paypal coming shortly.

MSCLCAR:

The like chrome powdercoat is more like SILVER, it's not like chrome really. I would suggest getting another color they all look better than the silver in my opinion unless you have a silver car or something, but don't mistaken it as looking like chrome.

Is the exterior of your TB polished? If so do you not like it or what? I can polish it up better if you want to make it look near chrome if it's just not shiny enough or something. No problem on the return spring, I have about a 100. To port/polish and powdercoat the outside, it's $130. The chrome shaft/spring option is $35. Now if you want me to polish the outside instead of powdercoat it, it's another $50 but will look near chrome. I think that is what you are looking for.

Scott

 

Thanks Scott,

Sounds like $165 to me. Unless you also offer a special for non-powdercoated at $145? I polished my TB myself, and it looks pretty good, but I have to clean it for shows. You know aluminum. So I was thinking this might emilinate that and make it a little shinier. But it's fine the way it is. I guess I can polish it more after I get it back if I want it even prettier. Let me know on the price, & where I need to ship it to.

What is the lead time? I wanted to go dyno in 2 weeks after I get my headers finished. I could ship it to you after that......

Mark

 

Mark,

$165 if you want it powdercoated. If you want to keep the stock polished finish you have and maybe touch it up a little for you, I can do it for $145 + $10 shipping. I can have it done in 3 days from when it comes into the shop and will only take a day or two to get up to washington to you. Send the TB along with a cashier's check, MO, or pay by paypal:

Scott Jantzer
Jantzer Performance
2790 Foothill Blvd.
Grants Pass, OR 97526

 

OK Scott, thanks. I will write this down & be back in touch come February. I plan on doing this whil I'm installing the LSX manifold, so when the time comes if it's still 3 days, or it's 5 days, it shouldn't matter. And PayPal works for me. Talk to you soon.

Mark