***Texas Speed & Performance Forum Specials***
#61
I'm doing a 9.0 compression 370 6.0. I have a 88mm on3 turbo to go on it. Ported 317 stock truck intake. 3500# 6500 redline. 3200 stall. Looking for a decent cam but not looking for it to be fairly mild idle. Th400 any of these a good option or could you pm me a suggestion. Thanks Stephen
#62
I'm doing a 9.0 compression 370 6.0. I have a 88mm on3 turbo to go on it. Ported 317 stock truck intake. 3500# 6500 redline. 3200 stall. Looking for a decent cam but not looking for it to be fairly mild idle. Th400 any of these a good option or could you pm me a suggestion. Thanks Stephen
#64
Thanks!
#66
Super aggressive for a 370cid. I would normally recommend that cam to someone with a 416/418+ motor. That said, it would make a ton of peak power on that setup. Might be lazy down low. It will clear PTV with aftermarket pistons, but make 100% sure the springs are good and sufficient enough to handle that much lift.
#68
#72
We had torque converters on here but they have been sold. We can only have a certain amount of active sales threads at once. Therefore, we constantly update this thread with new items, so the thread title needed to be somewhat generalized.
#73
New Items Added...
Precision Industries Vigilante 2800 Stall for LS1 4L60e
Will fit 98-02 F-Body, 04-06 GTO, LSx Trucks/SUVs
Retails for $800; ON SALE for $599.99 + shipping
Pacesetter Ceramic Coated 04-06 GTO Headers
P/N 66-72C2258 - Retail $456.99; ON SALE for $375 + shipping
(Headers ONLY)
Precision Industries Vigilante 2800 Stall for LS1 4L60e
Will fit 98-02 F-Body, 04-06 GTO, LSx Trucks/SUVs
Retails for $800; ON SALE for $599.99 + shipping
Pacesetter Ceramic Coated 04-06 GTO Headers
P/N 66-72C2258 - Retail $456.99; ON SALE for $375 + shipping
(Headers ONLY)
Last edited by Sales4@Texas-Speed; 07-22-2015 at 03:59 PM.
#75
Texas Speed & Performance 98-02 F-Body 2" Headers!!!
You asked for them. We built them. You now have an option for an inexpensive stainless steel 2" header! We are pleased to announce that our TSP 2" primary 304 stainless steel header for the 98-02 F-Bodies are now available! They are 16-gauge stainless in a raw finish with O2 bungs welded in and velocity spikes. They are being offered in a 3" or 3-1/2" collector. Pictured below is the 3" collector version. Click images for full size.
These will be sold for $599.99 + shipping WITH O2 extensions and GM header gaskets!
We will also have a package deal including your choice of a BMR or UMI Tubular K-Member for $1049.99 + shipping.
These will be sold for $599.99 + shipping WITH O2 extensions and GM header gaskets!
We will also have a package deal including your choice of a BMR or UMI Tubular K-Member for $1049.99 + shipping.
#78