The mother of ALL LS1 shortblock sales!
#1
The mother of ALL LS1 shortblock sales!
Okay, guys. Now that we have a guaranteed delivery policy on our engines, it is time to put it into effect.
Ready for this?
All of our shortblocks are $500 off! This is for all orders placed between September 16, 2004 and September 24, 2004.
Here are the basic prices:
Cheap Street 347 - $2,299 +core charge of $850 - (370-500 flywheel hp depending on head and cam pkg.)
Polished/Magnafluxed crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
382 Short block - $3,350 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Eagle forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
382 Short block - $3920 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
408 Short block - $3920 +core charge of $650 - (550-600 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
(This is the same shortblock featured in the September 2004 issue of Chevy High Performance magazine!)
427 Short block - $6,999 - no core charge! - (600+ flywheel hp depending on head and cam pkg )
Darton Wet Sleeve Block, Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
All of these above blocks are fully machined, balanced, blueprinted and assembled. Of course, shipping charges vary.
ADDTIONAL OPTIONS:
Custom Grind Camshafts - $350.00 (w/short block order)
Custom Pistons for higher boost/N20 levels - $150
Callies rod upgrade - $350
Cloyes adj. timing chain set - $150.00
JWiss Ketton C5R timing chain - $155.00
APE Ported and Coated Oil Pumps - $155.00 (w/short block order)
ARP Head Studs - $219.00
ARP L19 Head Studs (limited supply) - $450.00
Install front, rear cover & oil pan - (no charge for labor, but must buy gaskets or send them to us)
All short blocks prices can carry over to a long block assembly. If you don't see what you want, just give us a call to get a custom engine built. We can make it happen.
We also doing this for LT1 engines.
NOBODY has an engine with the same quality components we use for these prices, and NOBODY has our delivery guarantee. In case you didn't hear about our new engine delivery guarantee...when you leave a deposit to have us build your engine, we will give you a date that the engine will ship. If we do not ship your engine by that date, your engine is 100% FREE, shipping and all. Guaranteed delivery times vary by how many orders we have at the time, but the sooner you get your order in, the less the delivery time will need to be. So...who thinks they are going to be the first to get a free motor? Give us a call.
Ready for this?
All of our shortblocks are $500 off! This is for all orders placed between September 16, 2004 and September 24, 2004.
Here are the basic prices:
Cheap Street 347 - $2,299 +core charge of $850 - (370-500 flywheel hp depending on head and cam pkg.)
Polished/Magnafluxed crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
382 Short block - $3,350 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Eagle forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
382 Short block - $3920 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
408 Short block - $3920 +core charge of $650 - (550-600 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
(This is the same shortblock featured in the September 2004 issue of Chevy High Performance magazine!)
427 Short block - $6,999 - no core charge! - (600+ flywheel hp depending on head and cam pkg )
Darton Wet Sleeve Block, Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
All of these above blocks are fully machined, balanced, blueprinted and assembled. Of course, shipping charges vary.
ADDTIONAL OPTIONS:
Custom Grind Camshafts - $350.00 (w/short block order)
Custom Pistons for higher boost/N20 levels - $150
Callies rod upgrade - $350
Cloyes adj. timing chain set - $150.00
JWiss Ketton C5R timing chain - $155.00
APE Ported and Coated Oil Pumps - $155.00 (w/short block order)
ARP Head Studs - $219.00
ARP L19 Head Studs (limited supply) - $450.00
Install front, rear cover & oil pan - (no charge for labor, but must buy gaskets or send them to us)
All short blocks prices can carry over to a long block assembly. If you don't see what you want, just give us a call to get a custom engine built. We can make it happen.
We also doing this for LT1 engines.
NOBODY has an engine with the same quality components we use for these prices, and NOBODY has our delivery guarantee. In case you didn't hear about our new engine delivery guarantee...when you leave a deposit to have us build your engine, we will give you a date that the engine will ship. If we do not ship your engine by that date, your engine is 100% FREE, shipping and all. Guaranteed delivery times vary by how many orders we have at the time, but the sooner you get your order in, the less the delivery time will need to be. So...who thinks they are going to be the first to get a free motor? Give us a call.
#2
The mother of ALL LS1 shortblock sales!
Okay, guys. Now that we have a guaranteed delivery policy on our engines, it is time to put it into effect.
Ready for this?
All of our shortblocks are $500 off! This is for all orders placed between September 16, 2004 and September 24, 2004.
Here are the basic prices:
Cheap Street 347 - $2,299 +core charge of $850 - (370-500 flywheel hp depending on head and cam pkg.)
Polished/Magnafluxed crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
382 Short block - $3,350 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Eagle forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
382 Short block - $3920 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
408 Short block - $3920 +core charge of $650 - (550-600 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
(This is the same shortblock featured in the September 2004 issue of Chevy High Performance magazine!)
427 Short block - $6,999 - no core charge! - (600+ flywheel hp depending on head and cam pkg )
Darton Wet Sleeve Block, Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
All of these above blocks are fully machined, balanced, blueprinted and assembled. Of course, shipping charges vary.
ADDTIONAL OPTIONS:
Custom Grind Camshafts - $350.00 (w/short block order)
Custom Pistons for higher boost/N20 levels - $150
Callies rod upgrade - $350
Cloyes adj. timing chain set - $150.00
JWiss Ketton C5R timing chain - $155.00
APE Ported and Coated Oil Pumps - $155.00 (w/short block order)
ARP Head Studs - $219.00
ARP L19 Head Studs (limited supply) - $450.00
Install front, rear cover & oil pan - (no charge for labor, but must buy gaskets or send them to us)
All short blocks prices can carry over to a long block assembly. If you don't see what you want, just give us a call to get a custom engine built. We can make it happen.
We also doing this for LT1 engines.
NOBODY has an engine with the same quality components we use for these prices, and NOBODY has our delivery guarantee. In case you didn't hear about our new engine delivery guarantee...when you leave a deposit to have us build your engine, we will give you a date that the engine will ship. If we do not ship your engine by that date, your engine is 100% FREE, shipping and all. Guaranteed delivery times vary by how many orders we have at the time, but the sooner you get your order in, the less the delivery time will need to be. So...who thinks they are going to be the first to get a free motor? Give us a call.
Ready for this?
All of our shortblocks are $500 off! This is for all orders placed between September 16, 2004 and September 24, 2004.
Here are the basic prices:
Cheap Street 347 - $2,299 +core charge of $850 - (370-500 flywheel hp depending on head and cam pkg.)
Polished/Magnafluxed crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
382 Short block - $3,350 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Eagle forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
382 Short block - $3920 +core charge of $750 - (500-550 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
408 Short block - $3920 +core charge of $650 - (550-600 flywheel hp depending on head and cam pkg.)
Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
(This is the same shortblock featured in the September 2004 issue of Chevy High Performance magazine!)
427 Short block - $6,999 - no core charge! - (600+ flywheel hp depending on head and cam pkg )
Darton Wet Sleeve Block, Callies forged crank, Eagle H-Beam Rods, Diamond Pistons/Pins/Rings, Federal Mogul Main Bearings, Clevite Rod Bearings, ARP main studs
All of these above blocks are fully machined, balanced, blueprinted and assembled. Of course, shipping charges vary.
ADDTIONAL OPTIONS:
Custom Grind Camshafts - $350.00 (w/short block order)
Custom Pistons for higher boost/N20 levels - $150
Callies rod upgrade - $350
Cloyes adj. timing chain set - $150.00
JWiss Ketton C5R timing chain - $155.00
APE Ported and Coated Oil Pumps - $155.00 (w/short block order)
ARP Head Studs - $219.00
ARP L19 Head Studs (limited supply) - $450.00
Install front, rear cover & oil pan - (no charge for labor, but must buy gaskets or send them to us)
All short blocks prices can carry over to a long block assembly. If you don't see what you want, just give us a call to get a custom engine built. We can make it happen.
We also doing this for LT1 engines.
NOBODY has an engine with the same quality components we use for these prices, and NOBODY has our delivery guarantee. In case you didn't hear about our new engine delivery guarantee...when you leave a deposit to have us build your engine, we will give you a date that the engine will ship. If we do not ship your engine by that date, your engine is 100% FREE, shipping and all. Guaranteed delivery times vary by how many orders we have at the time, but the sooner you get your order in, the less the delivery time will need to be. So...who thinks they are going to be the first to get a free motor? Give us a call.
Trending Topics
#18
TECH Senior Member
iTrader: (9)
Originally Posted by Jason@AP-Engineering
We can make it happen. Just give us a call!
Aint nothin gonna happen until you guys start answering the phone over there. Tryed to call you 4 times in the last 1/2 hour and keep getting sent through some voice routing system and then nothing.
#19
Under criminal investigation for fraud
iTrader: (-2)
Join Date: Jan 2004
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NataSS Inc
Aint nothin gonna happen until you guys start answering the phone over there. Tryed to call you 4 times in the last 1/2 hour and keep getting sent through some voice routing system and then nothing.
Sorry about that, our voice mail has been acting up. PM me your number and we will call you!
Thanks