THE MOTHER OF ALL SHORTBLOCK SALES, part 2!!
02-04-2005, 07:59 AM
#61
TECH Enthusiast
Originally Posted by Rollin Black
Hello Guys.
Great sale!
Questions on the 427 shortblock:
1) In general are the pistons flush with the deck or are they out of the hole? If out, how much? I would like to know so I can see if my heads will work.
2) Also, how big is the dish on the included pistons?
3) As of today, roughly what is the lead time for the 427 shortblock once deposit has been received? I would want to upgrade to the Callies rods that were mentioned ($350) and also coating the pistons (skirts & top)
You can email me - plewand@soflinks.com
Thanks, Perry
Great sale!
Questions on the 427 shortblock:
1) In general are the pistons flush with the deck or are they out of the hole? If out, how much? I would like to know so I can see if my heads will work.
2) Also, how big is the dish on the included pistons?
3) As of today, roughly what is the lead time for the 427 shortblock once deposit has been received? I would want to upgrade to the Callies rods that were mentioned ($350) and also coating the pistons (skirts & top)
You can email me - plewand@soflinks.com
Thanks, Perry
E-mail sent
02-04-2005, 01:23 PM
#63
Under criminal investigation for fraud
Thread Starter
iTrader: (-2)
Join Date: Jan 2004
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DAPSUPRSLO
I just pm'd Chris. Could you guys pm me when you are available for a phone conversation about a possible 422 iron block.
Any time you are ready, just give us a call.
Thanks
02-04-2005, 02:26 PM
#66
Under criminal investigation for fraud
Thread Starter
iTrader: (-2)
Join Date: Jan 2004
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by matt346ls1
Can't wait to get my motor from APE. It will be pushed to the limit with my new combo but I know it will handle it.
Matt
Matt
Your a repeat customer..........so you know they work! Now you need a engine for the gold car!
02-04-2005, 04:13 PM
#68
Launching!
iTrader: (1)
Join Date: Jan 2002
Location: Albuquerque
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Chris, are the diamond pistons that come with this shortblock designed to keep the use of the quench for these engines? I am going to be going with a stock cubed turbo application. Would it be better to go with dished pistons to lower CR or to just use a large chamber head? I think I will be shooting for around 9:1 compression over all.
02-04-2005, 05:26 PM
#70
TECH Enthusiast
Originally Posted by Magic Chicken
what is the highest compression shelf piston you have that is capable of a good healthy dose of nitrous? (300 hp)
I'll assume a 6.125" rod.
02-04-2005, 05:48 PM
#71
TECH Fanatic
Join Date: Mar 2002
Posts: 1,044
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Chris@AP-Engineering
Your a repeat customer..........so you know they work! Now you need a engine for the gold car!
Matt: It's gonna be a blast on the street!
SC-
02-05-2005, 08:31 AM
#73
Teching In
Join Date: Jan 2004
Location: The Motor City
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Eric, you may need a custom piston if you want to spray a 300 shot, Diamond recommends a max of 200 on shelf stock pistons. The highest compression you can get with an off the shelf piston is 12.4 :1 cr. That is with a 62cc cylinder head.
Please give us a call if you have any technical questions regarding our shortblock's.
Thanks Rudy@A.P.E.
(586)954-3181
Please give us a call if you have any technical questions regarding our shortblock's.
Thanks Rudy@A.P.E.
(586)954-3181
02-06-2005, 09:12 AM
#75
TECH Enthusiast
Originally Posted by Caveman
Thanks for the help today Nick, I look forward to my new badass setup 
.
.
