Hey Allan Futral! How about a cam w/ all components GP??
#25
Super Moderator
iTrader: (9)
Re: Hey Allan Futral! How about a cam w/ all components GP??
I want to order Allan, but an concerned whether my heads have enough meat on top to support the bigger springs. I am sending the heads out to Aboslute Speed to evaluate. Until then, I won't know which cam I can use.
Sorry for the delay, I will buy something, but need to have the heads evaluated first.
Sorry for the delay, I will buy something, but need to have the heads evaluated first.
#26
TECH Fanatic
iTrader: (12)
Re: Hey Allan Futral! How about a cam w/ all components GP??
I'd be in for just a cam. (maybe another set of REV-1116 springs as well, need to replace my current ones)
I'm Currently running a 224/224 .581/.581 112+0 Comp Cam now. I'm looking for something new and bigger. I'm already running dual springs good for .610 lift on stock heads.
I'm in an M6 car, 4.10 gears, and idle quality really isn't a concern with me and tuning is in store later this summer. I'm also running a 175-225 shot of nitrous.
The FM-8 and FM-9 are catching my attention, but maybe you can recommend me something a little better, or maybe something different. (Flycutting is not an option)
Thanks.
I'm Currently running a 224/224 .581/.581 112+0 Comp Cam now. I'm looking for something new and bigger. I'm already running dual springs good for .610 lift on stock heads.
I'm in an M6 car, 4.10 gears, and idle quality really isn't a concern with me and tuning is in store later this summer. I'm also running a 175-225 shot of nitrous.
The FM-8 and FM-9 are catching my attention, but maybe you can recommend me something a little better, or maybe something different. (Flycutting is not an option)
Thanks.
#27
Shorty Director
iTrader: (1)
Re: Hey Allan Futral! How about a cam w/ all components GP??
The FM-9 cam is more than enough.. Mine is on a 114 lsa... If you want a little more horses you could try it on a 112 or 111 lsa since you do not care about idle. My current cam peaks at 6600rpm with my current setup.. I am sure if I went Stage II heads my peak would go up to 6800rpm.. I am over 405rwhp from 5600rpm to 7000rpm.. I am still running a old Ed tune from 4 cams ago.. I am sure ls1edit tuning would pick those #'s up a little. Did I mention I have midlength headers? Did I mention my dyno's were with 17x11's with 315's? Did I mention no dyno tricks..? No alum flywheel, no shortbelt, lid closed, 93 octane, dyno factor of 5, 95degree weather, no CFDS, etc.. Did I mention my heads flow only 280cfm at .600? Let me stop bragging.. The point is you cannot go wrong with Futrals cams.. My awesome TEA Stage I's with stock valves did not hurt either..
#30
Re: Hey Allan Futral! How about a cam w/ all components GP??
Hey Allan, just curious... When will the parts ship?
I need to know, because the wife and I are going to the Keys on Sunday and return on Wednesday, and I want to make sure someone will be here when the UPS guy shows up.
Thanks.
I need to know, because the wife and I are going to the Keys on Sunday and return on Wednesday, and I want to make sure someone will be here when the UPS guy shows up.
Thanks.
#36
Re: Hey Allan Futral! How about a cam w/ all components GP??
Richie,The GP was a go with several orders over
Your order and a few others went out today,Ran out of pushrods.The others will ship out soon as I get restock in.
Vince,the couple were our friends that live here,just got married at Fort Pickens in Pensacola
Your order and a few others went out today,Ran out of pushrods.The others will ship out soon as I get restock in.
Vince,the couple were our friends that live here,just got married at Fort Pickens in Pensacola