2000_SS

iTrader: (24)

does that ~$1100+shipping include new gaskets and the stainless hardware i've heard the 92mm's come with?

and do these models still have potential for some serious port work like the 90mm's? or did they REALLY revise the design?

Lythropus

iTrader: (13)

I still need to know if I can port my fast 90 to match the new 92mm throttlebody?

Jon@Texas-Speed

iTrader: (18)

These will come with all the stainless hardware. We are looking to see how much porting can be done. As soon as I get some more 90mm in stock, I will check to see if they can be ported to accept the 92mm TB. I would guess they will but I just want to confirm before saying they will.

Speed

iTrader: (33)

Hey Jon, just wanted to confirm this setup is in stock and ready to ship? And can you use the 92mm TB with the fly by wire setup on a c5?

cxpcman

iTrader: (1)

damn...... seems like i will work only to pay specials from TSP .
don't know if thats good or bad

2000PewterZ28

Great price! Is comp replacing the 90 with the 92?

Jon@Texas-Speed

iTrader: (18)

They are in stock and ready to go. Currently I don't have a 92mm TB for the Vettes. We have been running the LS2 TB with the 90mm intake but we are still looking at a TB for the vette guys with the 92mm setup.

I did recieve an email from FAST saying that the 92mm was indeed replacing the 90mm which as now been discontinued. I am going to try and confirm that for sure today.

Jon

01BlackCamaroSS

iTrader: (1)

how long are you guys going to run the special price for the 92 combo

nifty97z

iTrader: (47)

And are you willing to price match?

Jon@Texas-Speed

iTrader: (18)

In most cases I can. Let me know the price and who it is.

BADSZ28

iTrader: (39)

Just want to hear about the differences other than inlet size.

DBanks

iTrader: (5)

those intakes are hot!

Lythropus

iTrader: (13)

Can the 90 be ported for the 92mm throttle body?

Speed

iTrader: (33)

Absolutely. I just ported mine to 95mm to run a tlewis tb. Works great!

Lythropus

iTrader: (13)

Wow, do you have a pic of that?

Speed

iTrader: (33)

Naaa, my damn camera died this weekend. Basically, on the fast 90, the very edge of the tb gasket receiver groove is 95mm. I opened the neck up to that point leaving just a hint of a lip inside. Then cleaned it up and smoothed it working my way up to 600 grit. I used a thin film of silicon to make sure it sealed. Works great!