New PBT Special! CryoTech Rotors and Hawk HPS Pads $299.00 plus shipping
#41
so the rotors are zinc plated and cryo treated? how much would a set of slotted only with just front pads cost shipped to 23693? i dont need that aggressive of a pad in the back.
thanks
thanks
#42
Just an observation... Unless you are trying to achive a certain goal and already know what to expect, I would imagine that running a less capable pad out back will throw off the balance of the braking system under extreme (ie: emergency) situations, in much the same way as an adjustable proportioning valve biased farther towards the front would.
I'm only pointing this out because the HPS pads have so much more "bite" than a standard semi metalic. A braking system operating at 90% of its capability may not be noticeable during day to day, or even spirited driving conditions. But in an emergency situation, loosing 10 feet of stoping distance can mean the difference between being 5 feet behind someones bumper or 5 feet into it... Disclaimer concluded!
Harry
#45
With a full set of slotted only rotors (yes, zinc'd and Cryo'd) and just the front pads, about $334 to your door.
Just an observation... Unless you are trying to achive a certain goal and already know what to expect, I would imagine that running a less capable pad out back will throw off the balance of the braking system under extreme (ie: emergency) situations, in much the same way as an adjustable proportioning valve biased farther towards the front would.
Harry
Just an observation... Unless you are trying to achive a certain goal and already know what to expect, I would imagine that running a less capable pad out back will throw off the balance of the braking system under extreme (ie: emergency) situations, in much the same way as an adjustable proportioning valve biased farther towards the front would.
Harry
#47
Unfortunately yes, about $15.00
$49.48 for shipping so that would be $348.48 total
I knew you had a plan. I was just covering the basics, trying to be a responsible vendor!
PM sent!
334 sounds great...and what im trying to do is get rid of some of the rear brake bias. im switching over to z06 front calipers, and they have smaller pistons, so im trying to offset the already strong rear bias with some less aggressive pads. im eventually deleting ABS all together so I can just adjust the bias with a proportioning valve like you said.
PM sent!
#49
#51
Oh man... I ALWAYS give a military discounts! But do you have any idea how much it costs to ship rotors and pads to paradise??
I'll send you a PM and let you know what I can do.
Harry
#52
WOW!!! i just got mine in, Harry theses are bad ***!!! i thanks for getting them to me so fast!!, folks if you worried about this guy dont be A+ serves with him great to work with thanks very much
#53
Even with 20K on mine.. I still have NO rust @ all.. I drive my car everyday! No squeaks, some dust.. Nothing too noticable...
Listen, Harry is in Cali, i am in TX... Like alot of you guys i am VERY **** and had some of the samequestions for Harry when i was looking to buy.
He's a great guy, with a great product..
I will definately, w/o hesitation buy from him again..
TTT 4 a great guy...
A current pic...
Listen, Harry is in Cali, i am in TX... Like alot of you guys i am VERY **** and had some of the samequestions for Harry when i was looking to buy.
He's a great guy, with a great product..
I will definately, w/o hesitation buy from him again..
TTT 4 a great guy...
A current pic...
Thanks for the response, how do these rotors hold up to rust resistance, my car sits for prolonged periods of time and the stocks rust... Do these resist it since they are cyrotreated?? Im not saying they aren't going to rust at all but im sure this treatment is going to help right??
#56
Recieved my rotors today, they look awesome. Didn't get my ceramic pads though.
Harry i left a message on your cell, could you please call or pm me and let me know what happened to the pads?
Thanks!
Harry i left a message on your cell, could you please call or pm me and let me know what happened to the pads?
Thanks!
#57
Got it! Give me a call whenever you're ready.
I'll give you a call in just a few minutes.
Harry
Harry
#60