BMR Fabrication is having a Tax Refund Sale on select
4th Generation Suspension Parts!!

The Sale starts March 14th and continues until April 7th.

This is NOT just a 10% off sale like some previous sales from other suspension companies. Some BMR parts are selling for 30% and even 38% off the normal retail price!! Here is a complete list of Sale items that BMR is offering for the 4th Gen:

Shock Tower Brace (STB001) - $69.95 ($30 savings, 30% OFF)
Weld-In Relocation Bracket (CAB001) - $59.95 ($20 savings, 25% OFF)
Bolt-In Relocation Brackets (CAB002) - $79.95 ($50 savings, 38% OFF)
Tubular LCAs, poly bushings, non-adj (TCA001) - $99.95 ($30 savings, 23% OFF)
Tubular LCAs, poly bushings, adj, chrome moly (MCA002) - $169.95 ($30 savings, 15% OFF)
Panhard Rod, poly bushings, non-adj (PHR001) - $69.95 ($30 savings, 30% OFF)
Panhard Rod, poly bushings, adj (PHR002) - $99.95 ($30 savings, 23% OFF)
Boxed Subframe Connectors (SFC001) - $139.95 ($30 savings, 18% OFF)
Tubular Subframe Connectors (SFC004) - $129.95 ($25 savings, 16% OFF)

Product can be ordered at the sale price from any of our 85 authorized warehouse distributors. Here is a link to a list of our distributors :
http://www.bmrfabrication.com/distributors.htm

Product can also be ordered directly from BMR Fabrication by calling (813) 986-9302 or you can order online at:
http://www.gnetworks.com/v4/go?s=bmr

 

Nice sale!

Too bad the only items left I need, AA001 and AA002 are not on sale

 

Control Arm Relocation Brackets
CAB001 - Weld In Relocation Bracket ($59.95) - $20 Savings , 25% OFF


CAB002 - Bolt-In Relocation Bracket ($79.95) - $50 Savings , 38% OFF


Reposition your instant center by altering your control arm angle for increased traction . Made from strong 3/16" laser cut, cold rolled steel. Both versions will lower the rear of the control arms up to 3" and work with all makes of control arms. A must for lowered vehicles to reclaim lost control arm angles. Bolt in brackets are Available in Black Hammertone or red powdercoat. Weld-in brackets come bare only. All hardware and instructions included. NOTE: Bolt-in brackets will not fit aftermarket rear ends.


Lower Control Arms
TCA001 - Tubular Lower Control Arms ($99.95) - $30 Savings, 23% OFF

• Poly Bushings
• Non-Adjustable
• Mild Steel

MCA002 - Tubular Lower Control Arms ($169.95) - $30 Savings, 15% OFF

• Poly Bushings
• Adjustable
• Chrome Moly

Eliminate wheelhop and improve traction with an easy one hour installation. BMR's fabricated control arms are available in either fixed or adjustable lengths. The control arms are equipped with spiral fluted internally lubed high durometer polyurethane bushings.

The non-adjustable tubular control arms are fabricated from 1.625" x .120" DOM tubing.

The adjustable version is made from 1.25" x .095" 4130 chrome moly tubing. This control arm uses custom 3/4" heavy duty chrome moly double adjusters for the street version. These control arms can be adjusted "on-car".


Panhard Rods
PHR001 - Panhard Rod ($69.95) - $30 Savings , 30% OFF

• Poly Bushings
• Non-Adjustable
• DOM steel

PHR002 - Panhard Rod ($99.95) - $30 Savings , 23% OFF

• Poly Bushings
• Non-Adjustable
• DOM steel

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory F-Body panhard rods are made from stamped-u-shaped material and utilize soft, rubber bushings that allow deflection under load. BMR panhard rods are all made from large diameter 1.25", heavy wall DOM tubing and utilize low deflection polyurethane bushings. The adjustable versions use left-hand and right-hand thread to allow easy "on-car" adjustment. Our CNC machined adjusters are made from 4130 chromoly and have rolled threads. You won't find higher quality pieces.

By nature, a panhard rod will alter rear end position as ride height changes. This makes it necesarry to use an adjustable panhard rod when lowering your vehicle as it allows you to re-center the rear end. Adjustable panhard rods also become a "must-have" part if you are trying to fit the widest tires possible in the wheelwell. Available in Black Hammertone or red powdercoat.


Sub Frame Connectors
SFC001 - Boxed Subframe Connectors ($139.95) - $30 Savings , 18% OFF



SFC004 - Tubular Subframe Connectors ($129.95) - $25 Savings , 16% OFF



Reduce chassis flex to a minimum and increase your handling capabilities with a set of BMR subframe connectors. These weld-in subframe connectors fit 1993-2002 F-bodies and will work with all aftermarket exhaust systems. All mounting plates are made from either 3/16" or 1/4" laser cut plates for the ultimate in strength. Boxed connectors use 2" square tubing while tubular connectors use 1-5/8" roll cage tubing.

 

Any chance of adding the battery trunk bracket and the chrome radiator shroud?

 

+1 on the chrome radiator shroud.

 

need two questions answered

I read BMR recently updated the design of your boxed SFC, should the other sponsors which sell your parts have the updated design?

and will your LCA recolation brackets work with my moser 12 bolt?

 

need that torque arm relocation kit to go on sale...

 

was not that included in the 25% off sale which ends today, the sale that was via pm for torque arms

but still looking for answers to my questions above

 

The subframes where updated 4-5 years ago so I am sure thay all have the latest version And yes our weld-on relocation brackets will work on a Moser 12-bolt.

 

Kinda sux that you don't have any swaybars on sale.

 

+1 Put a rear one on sale and you have a sold member here.

 

3/18 bump

 

Just a reminder ALL of these parts are in stock and ready to ship!!
NO SHIPPING DELAYS

 

i know it is not listed but are you runing any deals on these part numbers??????


tc006 ...................... ta001

thanks

 

NO powdercoat fees on SALE items

 

Didn't realize there was an extra charge for the powdercoat on any of your parts?

 

 

Is your driveshaft loop on sale for a 00 camaro?

 

Unfortunately, this item is not on sale. However, we have this IN STOCK on the shelf and we can ship it the same day that you order it!! We have it in red and black hammertone.

 

3/22 bump