gauge cluster pinout...
The following users liked this post:
TRANS2002 (12-30-2023)
#2
ok well let me rephrase this...i need a picture of the actual plug/connector to go along with the following that i found thanks to "lt4malibu"
Pin
Wire Color
Circuit No.
Function
A1-A2
--
--
Not Used
A3
PNK
39
Ignition 1 Voltage
A4
--
--
Not Used
A5
TAN/WHT
33
Brake Warning Indicator Control
A6-A7
--
--
Not Used
A8
BRN/WHT
419
MIL Control
A9
--
--
Not Used
A10
ORN
640
Battery Positive Voltage
A11
--
--
Not Used
A12
LT BLU
14
Left Turn Signal Lamps Supply Voltage
A12
LT BLU/WHT
1414
Left Front Turn Signal Switch Signal
A13
PPL/WHT
237
Instrument Panel Lamp Control
A14-A16
--
--
Not Used
A17
LT GRN
11
Headlamp High Beam Supply Voltage
B1
BRN
9
Park Lamp Supply Voltage
B2
--
--
Not Used
B3
GRY
728
Security Indicator Control
B4
--
--
Not Used
B5
PPL/WHT
1035
Starter Relay Coil Supply Voltage
B6
GRY
1036
IPC Class 2 Serial Data
B7
ORN/BLK
737
Trunk Lamp Control
B8
DK GRN/WHT
817
VSS Signal
B9
GRY
8
Instrument Panel Lamp Supply Voltage - 1
B10
DK BLU
15
Right Turn Signal Lamps Supply Voltage - Europe, Japan
B10
DK BLU/WHT
1415
Right Front Turn Signal Switch Signal - Domestic, Gulf
B11
BLK
650
Ground
B12-B22
--
--
Not Used
B14
TAN
31
Oil Pressure Indicator Control
B15
BLK
650
Ground
B16-B17
--
--
Not Used
Pin
Wire Color
Circuit No.
Function
A1-A2
--
--
Not Used
A3
PNK
39
Ignition 1 Voltage
A4
--
--
Not Used
A5
TAN/WHT
33
Brake Warning Indicator Control
A6-A7
--
--
Not Used
A8
BRN/WHT
419
MIL Control
A9
--
--
Not Used
A10
ORN
640
Battery Positive Voltage
A11
--
--
Not Used
A12
LT BLU
14
Left Turn Signal Lamps Supply Voltage
A12
LT BLU/WHT
1414
Left Front Turn Signal Switch Signal
A13
PPL/WHT
237
Instrument Panel Lamp Control
A14-A16
--
--
Not Used
A17
LT GRN
11
Headlamp High Beam Supply Voltage
B1
BRN
9
Park Lamp Supply Voltage
B2
--
--
Not Used
B3
GRY
728
Security Indicator Control
B4
--
--
Not Used
B5
PPL/WHT
1035
Starter Relay Coil Supply Voltage
B6
GRY
1036
IPC Class 2 Serial Data
B7
ORN/BLK
737
Trunk Lamp Control
B8
DK GRN/WHT
817
VSS Signal
B9
GRY
8
Instrument Panel Lamp Supply Voltage - 1
B10
DK BLU
15
Right Turn Signal Lamps Supply Voltage - Europe, Japan
B10
DK BLU/WHT
1415
Right Front Turn Signal Switch Signal - Domestic, Gulf
B11
BLK
650
Ground
B12-B22
--
--
Not Used
B14
TAN
31
Oil Pressure Indicator Control
B15
BLK
650
Ground
B16-B17
--
--
Not Used
The following users liked this post:
maysc6 (02-19-2022)
#5
11 Second Club
iTrader: (3)
Join Date: Oct 2007
Location: Hawaii
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
so i see there is no RPM or anything? But there is a class 2 serial... does that hook up to the ecu's 58 DK GRN 1049 ECM/PCM/VCM Class 2 Serial Data on the blue connector?
Last edited by brianfromhawaii; 07-05-2009 at 02:30 AM.
Trending Topics
#9
i am also interested in this:
what gauges does that serial data line carry the signal for? is the signal interpreted at the gauge cluster? or is the BCM involved there somehow? Does the BCM do any actual interpretation of the signal or is that done at the gauge cluster?
what gauges does that serial data line carry the signal for? is the signal interpreted at the gauge cluster? or is the BCM involved there somehow? Does the BCM do any actual interpretation of the signal or is that done at the gauge cluster?
#10
Ungrounded Moderator
iTrader: (4)
The gauge cluster interprets class 2 serial data for the following gauges and indicators:
- ABS Inop indicator
- Airbag indicator
- ASR Off indicator (TCS Off in Firebirds)
- Brake warning (only to indicate loss of serial data signal)
- Change Oil indicator
- Check Gauges indicator
- Coolant Temperature gauge
- Fuel gauge
- Low Oil indicator
- Low Traction indicator
- Skip Shift indicator (M6 only)
- Service Vehicle Soon indicator
- Tachometer
The BCM doesn't receive or interpret any serial data.
- ABS Inop indicator
- Airbag indicator
- ASR Off indicator (TCS Off in Firebirds)
- Brake warning (only to indicate loss of serial data signal)
- Change Oil indicator
- Check Gauges indicator
- Coolant Temperature gauge
- Fuel gauge
- Low Oil indicator
- Low Traction indicator
- Skip Shift indicator (M6 only)
- Service Vehicle Soon indicator
- Tachometer
The BCM doesn't receive or interpret any serial data.
#11
anyone know if the e38 PCM can/will successfully communicate with the class 2 serial data instrument panel cluster of the 1999+ f-bodies?
Last edited by pillagenburn; 07-27-2009 at 07:35 PM.
#12
The gauge cluster interprets class 2 serial data for the following gauges and indicators:
- ABS Inop indicator
- Airbag indicator
- ASR Off indicator (TCS Off in Firebirds)
- Brake warning (only to indicate loss of serial data signal)
- Change Oil indicator
- Check Gauges indicator
- Coolant Temperature gauge
- Fuel gauge
- Low Oil indicator
- Low Traction indicator
- Skip Shift indicator (M6 only)
- Service Vehicle Soon indicator
- Tachometer
The BCM doesn't receive or interpret any serial data.
Based on that response you should be able to run the serial data wire to the cluster pinout straight from the pcm to get the cluster operational? I am trying to find out what all I would need to get a 2000 or so truck cluster working in a 81 c-10 LS swap. I know that fuel guage won't work, but if I wire in the pin outs on the connector from the pcm, lighting, turn signals and maybe Check engine should all work correct?
- ABS Inop indicator
- Airbag indicator
- ASR Off indicator (TCS Off in Firebirds)
- Brake warning (only to indicate loss of serial data signal)
- Change Oil indicator
- Check Gauges indicator
- Coolant Temperature gauge
- Fuel gauge
- Low Oil indicator
- Low Traction indicator
- Skip Shift indicator (M6 only)
- Service Vehicle Soon indicator
- Tachometer
The BCM doesn't receive or interpret any serial data.
Based on that response you should be able to run the serial data wire to the cluster pinout straight from the pcm to get the cluster operational? I am trying to find out what all I would need to get a 2000 or so truck cluster working in a 81 c-10 LS swap. I know that fuel guage won't work, but if I wire in the pin outs on the connector from the pcm, lighting, turn signals and maybe Check engine should all work correct?