How to remove bezel in front of radio?
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: Tampa, FL
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
How to remove bezel in front of radio?
Before I break the thing off, how does the bezel in front of the radio (00' T/A Monsoon) come off so that you cna change the radio?
Thanks.
Checked FAQ's and couldn't find anything.
Thanks.
Checked FAQ's and couldn't find anything.
#3
Launching!
Join Date: Jun 2005
Location: Greensboro, NC
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Just pry a little on the corners and it should pop right out. I usually just pull on the bottom (only place I can get a hold of with my fingers) and slowly pull until one of the edges come loose.
#4
Copy & Paste Moderator
I made a small video of how to remove the bezel and put it back on:
http://users.rcn.com/my57chevy/RadioBezel.wmv
I basically started at the top middle. When that part pulled away slightly (the clips havent budged yet), I slide my fingers left and pop off the left corner and work my way around to pop off all four corners.
http://users.rcn.com/my57chevy/RadioBezel.wmv
I basically started at the top middle. When that part pulled away slightly (the clips havent budged yet), I slide my fingers left and pop off the left corner and work my way around to pop off all four corners.
#5
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: Tampa, FL
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by VIP1
I made a small video of how to remove the bezel and put it back on:
http://users.rcn.com/my57chevy/RadioBezel.wmv
I basically started at the top middle. When that part pulled away slightly (the clips havent budged yet), I slide my fingers left and pop off the left corner and work my way around to pop off all four corners.
http://users.rcn.com/my57chevy/RadioBezel.wmv
I basically started at the top middle. When that part pulled away slightly (the clips havent budged yet), I slide my fingers left and pop off the left corner and work my way around to pop off all four corners.
Trending Topics
#9
TECH Enthusiast
iTrader: (12)
I made a small video of how to remove the bezel and put it back on:
http://users.rcn.com/my57chevy/RadioBezel.wmv
I basically started at the top middle. When that part pulled away slightly (the clips havent budged yet), I slide my fingers left and pop off the left corner and work my way around to pop off all four corners.
http://users.rcn.com/my57chevy/RadioBezel.wmv
I basically started at the top middle. When that part pulled away slightly (the clips havent budged yet), I slide my fingers left and pop off the left corner and work my way around to pop off all four corners.
Even more impressive? The video link above from 2005 still works! :-)