worlds first single remote mt turbo cts-v
11-29-2008, 12:22 AM
#21
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
i'm not so sure, you've got some advantages right now
in your favore. my stock radials won't help much 245/40/18
gdyr eagle rsa runflats. lol and i may get some clutch slip.
i may need to really address those issues, if it's going to be
a solid showing of what the car is capible of. lets see what
happens in the dyno/tune booth.
from your ET'S, you have more than what your showing Mr.!
LOL
in your favore. my stock radials won't help much 245/40/18
gdyr eagle rsa runflats. lol and i may get some clutch slip.
i may need to really address those issues, if it's going to be
a solid showing of what the car is capible of. lets see what
happens in the dyno/tune booth.
from your ET'S, you have more than what your showing Mr.!
LOL
11-29-2008, 09:35 AM
#22
i'm not so sure, you've got some advantages right now
in your favore. my stock radials won't help much 245/40/18
gdyr eagle rsa runflats. lol and i may get some clutch slip.
i may need to really address those issues, if it's going to be
a solid showing of what the car is capible of. lets see what
happens in the dyno/tune booth.
from your ET'S, you have more than what your showing Mr.!
LOL
in your favore. my stock radials won't help much 245/40/18
gdyr eagle rsa runflats. lol and i may get some clutch slip.
i may need to really address those issues, if it's going to be
a solid showing of what the car is capible of. lets see what
happens in the dyno/tune booth.
from your ET'S, you have more than what your showing Mr.!
LOL
What do you mean I have more than what I'm showing? You mean mods-wise? I can post up the full mod list if you want. It's just a mild H/C setup with some suspension work, steep gearing, and ET Streets. Honestly, I should be able to shave another tenth off without an issue with better tires but it still spins a bit off the line even when I launch at 5000 or so RPM. I should be able to dump it at 6500 but when I tried that I just sat there spinning. 
And my dyno numbers are SAE on a dynojet (Eastside Performance). My brother makes the same exact numbers and runs pretty much the same as me, also an 02 Z28 M6. The car is full weight, 3,500 pounds without me in it.
11-29-2008, 12:32 PM
#23
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
well you can def pilot that car well. no doubt about it.
as for me, i have to learn this car all over again.
i'm not trying to make excuses, but we both know
the driver mod curve is huge. i'm acctaully going
to wrench on this thing right now...so i'll be back l8tr
with some follow up pics of the install...
i'm waiting on one more turbo oil line fitting...
they said it should be in by tuesday!? uhg! lol
as for me, i have to learn this car all over again.
i'm not trying to make excuses, but we both know
the driver mod curve is huge. i'm acctaully going
to wrench on this thing right now...so i'll be back l8tr
with some follow up pics of the install...
i'm waiting on one more turbo oil line fitting...
they said it should be in by tuesday!? uhg! lol
11-29-2008, 12:40 PM
#25
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
as soon as the fitting comes in..then test and tune...
i'm sure it will be a wrap b4 friday.
it's always something! right? lol
right now im gonna swap out the plugs (ngk's)
and change the oil (tapped out the oil pan for oil return line bung)
i'll post the pictures @ 6pm. bbl
i'm sure it will be a wrap b4 friday.
it's always something! right? lol
right now im gonna swap out the plugs (ngk's)
and change the oil (tapped out the oil pan for oil return line bung)
i'll post the pictures @ 6pm. bbl
11-29-2008, 07:49 PM
#26
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
more pics of things that look like the other pics...lol
but these pics are finally all tied in and done.
the only thing i'm waiting for is a final turbo oil feed fitting.
bung to pan. done!
some blue tops
for those who think the filter is to close...some better angles.
peek a boo
meth nozzles and ait sensor relocated.
but these pics are finally all tied in and done.
the only thing i'm waiting for is a final turbo oil feed fitting.
bung to pan. done!
some blue tops
for those who think the filter is to close...some better angles.
peek a boo
meth nozzles and ait sensor relocated.
11-29-2008, 09:26 PM
#28
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
it means it's remote mounted. lol
rear mounted if you prefer. like an STS turbo system...
this is a "one off" build with no blueprint.
thank you, it's been about 4 months since
i decided to go FI,... and no1 had a turbo V.
So, thats pretty much my reason for the build.
rear mounted if you prefer. like an STS turbo system...
this is a "one off" build with no blueprint.
thank you, it's been about 4 months since
i decided to go FI,... and no1 had a turbo V.
So, thats pretty much my reason for the build.
11-30-2008, 11:33 AM
#29
Village Idiot
Join Date: Sep 2008
Location: Santa Monica, California
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
It's fun being the first... Now you can go on the Caddy forums and get all the perks and respect your computer can handle......
I've done a few rare things too with my SC400 years back that has gotten wooo's and ahhhhh's....
I've done a few rare things too with my SC400 years back that has gotten wooo's and ahhhhh's....
11-30-2008, 11:40 AM
#30
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
peep this link...the full story...
https://ls1tech.com/forums/forced-in...pix-build.html
as far as CF, that's a group of high school girls who only
care about the latest waxes,sparkly trinkets, and floormats...
all goons!
they would all cringe at the fact i cut a hole in a caddy.
bitchassness to the fullest.
lol
https://ls1tech.com/forums/forced-in...pix-build.html
as far as CF, that's a group of high school girls who only
care about the latest waxes,sparkly trinkets, and floormats...
all goons!
they would all cringe at the fact i cut a hole in a caddy.
bitchassness to the fullest.
lol
11-30-2008, 11:58 AM
#32
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
what car? my car was 55k new...
but i would never buy a new showroom
floor car ever again, as a car is a bad investment
new(my last was a 2000 frc vett).
...so i bought this V (an 06) 18mo. lease trade for 32k.
with 10,227mi.
btw your sig stable is sweet...
and yes i'll smack your benz.
but i would never buy a new showroom
floor car ever again, as a car is a bad investment
new(my last was a 2000 frc vett).
...so i bought this V (an 06) 18mo. lease trade for 32k.
with 10,227mi.
btw your sig stable is sweet...
and yes i'll smack your benz.
11-30-2008, 12:33 PM
#33
Village Idiot
Join Date: Sep 2008
Location: Santa Monica, California
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
The question is will you 06 V be as fast as 2009 556hp V?
DAMN SNORMAN - It must be nice being you...Your list of cars in your sig if off the charts... Dealing drugs or hit the lotto or something, damn? I'll take one of your toys and be happy...
DAMN SNORMAN - It must be nice being you...Your list of cars in your sig if off the charts... Dealing drugs or hit the lotto or something, damn? I'll take one of your toys and be happy...
11-30-2008, 02:07 PM
#35
Staging Lane
Join Date: Dec 2001
Location: Jersey/Orlando
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
what car? my car was 55k new...
but i would never buy a new showroom
floor car ever again, as a car is a bad investment
new(my last was a 2000 frc vett).
...so i bought this V (an 06) 18mo. lease trade for 32k.
with 10,227mi.
btw your sig stable is sweet...
and yes i'll smack your benz.
but i would never buy a new showroom
floor car ever again, as a car is a bad investment
new(my last was a 2000 frc vett).
...so i bought this V (an 06) 18mo. lease trade for 32k.
with 10,227mi.
btw your sig stable is sweet...
and yes i'll smack your benz.
But the 55 went 12.4 @ 114 mph on the stock Conti's. So I don't think it's that awfully quick, but it would **** on a stock CTS-V and it's quicker than the quickest bolt-on V. And that was in mid-80* air, hot off a 50 mile drive to the track.
Thanks for the compliment.
S.
11-30-2008, 02:21 PM
#36
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
my goal is to dominate ALL production 4 door sedans.
with that being said, come git sum.
with a remote style setup my car really only has an exhaust
modification. all else remains stock.
now das wussup!
with that being said, come git sum.
with a remote style setup my car really only has an exhaust
modification. all else remains stock.
now das wussup!
11-30-2008, 05:05 PM
#38
Banned
Thread Starter
Join Date: Oct 2008
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
aww you're afraid the you'll get slimed by the "SLUG"?
take off your skirt girlyman. i'll wait for you to click
your heels before i embarrass you. spending dads trust fund
money made you forget how to earn respect.
take off your skirt girlyman. i'll wait for you to click
your heels before i embarrass you. spending dads trust fund
money made you forget how to earn respect.
11-30-2008, 05:54 PM
#39
Village Idiot
Join Date: Sep 2008
Location: Santa Monica, California
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
GT67METHV - It sounds like you are in over your head on this challenge... Snorman, has some wicked toys to spank you in... Just my observation on the matter...
11-30-2008, 06:14 PM
#40
Staging Lane
Join Date: Dec 2001
Location: Jersey/Orlando
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I was complimenting you, but you've got a chip on your shoulder about a 4,000 lb. pig with a glass rear and an non-intercooled turbo setup that you 'hope' will make "475 to 500 rwhp".
So yeah...congrats. You might be able to beat a stock 55K car on a set of stock tires. Good for you.
S.