BES Stroked Nova

iTrader: (24)

well I dont really post much on here, but I figured I would share this on here.

I have been getting told all winter long that I was going to get my *** handed to me by everyone on my local forum.

well getting my heads ported and cam change, over the winter really changed things! and this is how it turned out with the little shot on the car! I cant wait to get a better fuel pump(racetronix kit is not enough) and get the car finished tuned and on the 150 shot.

thanks for watching.

http://videos.streetfire.net/video/R...-HC_645643.htm

180ls1

iTrader: (4)

did i see you comment sating you were spinning it to 8k on the stock bottomend? that is pretty impressive and nice video too.

BES Stroked Nova

iTrader: (24)

rev limit is 8k, and I shift at 7800... and yea its a stock bottom with rod bolts

any other questions on the setup, I'll share.

thanks
Charlie

pewter02z28gs

whats the power curve like with that cam? does it have anything below 3500

BES Stroked Nova

iTrader: (24)

lol are you serious? I just said I rev it to 7800, why would I care about below 3500? but no, a smaller cube motor with the big L92's and a cam that big with a single plane intake, wont have that much down low.. but I like to race it, so its built to rev hard.

well I can cruise pretty nice at 75 in 6th with 4.30's. if that counts for anything...

pewter02z28gs

well im road course guy so im always looking to try to get the most rpm out each gear that why i asked if it hade anything at 3500 or below

MeentSS02

iTrader: (11)

That was an *** whoopin'...what did the people on your local board have to say?

1gt2nv

iTrader: (5)

Wow!! You walked him good. I bet he had a excuse why he lost though.

PewterScreaminMach

iTrader: (7)

Great kill! Can't wait to see what your guys on the local board have to say about it.

And lol at the "anything under 3500" question. That cam is monstrous and at revving it out to 7800.

ScreaminRedZ

iTrader: (3)

Very nice kill! That's a crazy setup on there! Nice to see someone who built a car for all out *** kicking. It gets old listening to everyone post up about how you need low end, and bottom end torque, lol.

SMOKNSS

iTrader: (3)

LMFAO! So now you got a RB26 in the SS a RB25 in the old Z. How bad does it feel to get BLOWED down! No comparisson!

BES Stroked Nova

iTrader: (24)

yea there are 11 pages of bullshit pretty much...

first they tell me I have stroker motor and a 250 shot?

and now they think his car from a 40 roll will do better... well now you just put me in 2nd gear at about 5500 for the hit, not at 4200 in 3rd for the 60 roll races.

These kids really have no clue what a powerband is, if there wasn't someone on this site that would go and tell them all about it, I would be more than glad to post the dyno sheets and video's, but I want to wax their ***'s some more first!

So i guess next week he wants a 40 roll... lawl!

PewterScreaminMach

iTrader: (7)

Get it on video again!

stumprrp

iTrader: (2)

your car WINES out man, sick

w3s1c0a5t

iTrader: (3)

Great sound and performing car bro. Must have some Big ones to spin it that high. I've been considering a similar build on a 346 with the large cam and single plane. Im thinking on the spray it will love it with the stalled auto.

98TADRIVER

iTrader: (36)

i like the one comment ""that 240 probably wasnt tuned to its full potential"

venom ws7

iTrader: (13)

Sick car man sounds awesome

necrocannibal

iTrader: (5)

So I go to watch the video and the first comment i see is that the other car should have raped you and asked if he was spinning really badly?? Are you shitting me? What a bunch of morons.

Nitroused383

iTrader: (10)

That was awesome man, your car motates. Is this a solid roller setup or are you spinning a hydraulic roller to 8k? Sure sounds nice up that high.