01 FireHawk vs 04 GT Stang
#141
Are you serious? You really think the absolute fastest n/a 331 in the world would barely (if at all) beat you when you CLAIM you would run around 10.5? You are really that clueless?
#142
***Repost Police***
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
I gotta agree with him on a one of those slow *** 2 valves running 10's or 9's: maybe in a 2000 pound dragster with a 100lb fiberglass mustang body on it, but there is no way in hell one of those things is putting out the 700-800hp it would take to drag a 3200lb+ mustang to 9's and 10's. Unless you guys found a way to make that overhead cam scream to 12,000rpms like a nascar!?
#144
You run 11.8@119mph. That is what pullied 03 Cobras run with IRS. A solid axle 03 Cobra with a 75 shot is a 10.9 or better car EASY! Sorry to be the one to break it to you.
#145
TECH Junkie
iTrader: (33)
Here is what my heads, cam 331 mustang and a 6 speed made on motor.
Mind you this is through chambered mufflers with an OTS hydraulic camshaft (.576/.576) and after 5 to 6 pulls on the dyno getting the tune correct. And this is all out of the box parts with no port work past gasket matching the intake to the heads (something any good engine builder does reguardless).
Had I put 1.7 RRs on it and a little better exhaust the car would have made 470+rwhp with ease. No idea what it would have done if I decided to port the intake or the heads. I just had some left over parts that I used so I could get the car on the road. I'm not much for the ricer math racing so I will let you decide on what it would run.
Mind you this is through chambered mufflers with an OTS hydraulic camshaft (.576/.576) and after 5 to 6 pulls on the dyno getting the tune correct. And this is all out of the box parts with no port work past gasket matching the intake to the heads (something any good engine builder does reguardless).
Had I put 1.7 RRs on it and a little better exhaust the car would have made 470+rwhp with ease. No idea what it would have done if I decided to port the intake or the heads. I just had some left over parts that I used so I could get the car on the road. I'm not much for the ricer math racing so I will let you decide on what it would run.
#147
Thats why I said he beat the driver you dumbass. And what the **** are you talking about? Are you saying I don't know how to drive?
#149
#150
Says the guy that needs the car to shift itself. I bet your driving skills are badass son! Hold brake...give car gas...hold brake.....let off brake....floor gas pedal............................................. ....................................lift off the throttle and hit brakes. Man don't mess with your skills!
And like I said, are you saying I don't know how to drive?
And like I said, are you saying I don't know how to drive?
#151
TECH Junkie
iTrader: (33)
Says the guy that needs the car to shift itself. I bet your driving skills are badass son! Hold brake...give car gas...hold brake.....let off brake....floor gas pedal............................................. ....................................lift off the throttle and hit brakes. Man don't mess with your skills!
And like I said, are you saying I don't know how to drive?
And like I said, are you saying I don't know how to drive?
Let me know when you go to Zmax. I'll be there to hand you your ***.
#152
Meet me tomorrow you little ****. To hell with waiting! I am coming more than half way to meet you in your own state. We will line them up on the street, from a dead stop so you can get your race, I will set you out a car length, AND I will leave off you. Put your money where your big ******* mouth is. I'll show you what a N/A Ford will do.
#153
TECH Junkie
iTrader: (33)
Meet me tomorrow you little ****. To hell with waiting! I am coming more than half way to meet you in your own state. We will line them up on the street, from a dead stop so you can get your race, I will set you out a car length, AND I will leave off you. Put your money where your big ******* mouth is. I'll show you what a N/A Ford will do.
#154
#157
TECH Senior Member
iTrader: (39)
Meet me tomorrow you little ****. To hell with waiting! I am coming more than half way to meet you in your own state. We will line them up on the street, from a dead stop so you can get your race, I will set you out a car length, AND I will leave off you. Put your money where your big ******* mouth is. I'll show you what a N/A Ford will do.
#160