ran a 99 procharged Cobra
#21
TECH Junkie
Join Date: Apr 2002
Location: School, Texas
Posts: 3,305
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slyws6
Home of the First Normally Aspirated LS1 346 CAM ONLY to run in the 10's.. Best run to date 10.98@121.44
www.futralmotorsports.com
-Sly
www.futralmotorsports.com
-Sly
#23
On The Tree
iTrader: (1)
Join Date: Oct 2002
Location: Ocala Florida
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
So what is wrong with an ls1 at 3000lbs? Notchbacks weigh right around that and they still are slow. He probably does have more than just a cam,
like headers, intake, good rear, and a tune.
But NO HEADS and no POWER ADDER.
Ls1's can run fast at full weight, see sig,
but when stripped down to mustang raceweights, they can run REALLY fast, and they don't need ANY power adders.
Bye the way, quoting peak hp numbers on a centri blown car means nothing. Because they don't build any power till redline, and have not much down low due to the blower needing to spool up with revs and the drag itself of spinning the blower at low revs, they don't exactly have the greatest "area under the curve" dyno sheets.
like headers, intake, good rear, and a tune.
But NO HEADS and no POWER ADDER.
Ls1's can run fast at full weight, see sig,
but when stripped down to mustang raceweights, they can run REALLY fast, and they don't need ANY power adders.
Bye the way, quoting peak hp numbers on a centri blown car means nothing. Because they don't build any power till redline, and have not much down low due to the blower needing to spool up with revs and the drag itself of spinning the blower at low revs, they don't exactly have the greatest "area under the curve" dyno sheets.
Last edited by glhs379; 01-07-2004 at 08:46 AM.
#25
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Oct 2003
Location: Holly Springs, NC
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
ross87t,
I don't know what else was done to his car, he just said Procharger. Maybe he still had stock gearing too, that may have hurt him a little. With my mods, I would think I would be in the 380-390hp range before tuning. Also I do have all the free mods and !spare and back seats if that helps.
I don't know what else was done to his car, he just said Procharger. Maybe he still had stock gearing too, that may have hurt him a little. With my mods, I would think I would be in the 380-390hp range before tuning. Also I do have all the free mods and !spare and back seats if that helps.
#27
STF Veteran
Join Date: Oct 2003
Location: Greensboro, North Carolina
Posts: 3,486
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by white99gt
Me -if she dont see redline that day .I never cranked her up .
It is physically impossible for me to drive my car and not floor it. I have tried many times. I will always end up getting on it and I won't realize what I have done until it is too late.
#29
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Oct 2003
Location: Holly Springs, NC
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
Chris, not trying to start a war, but I never said I was cam only. I said see sig for mods.
Plus I don't think that 45-50lbs of weight removal helped me that much when I weigh around 240lbs and had the wind resistance with the tops out and windows down.
Plus I don't think that 45-50lbs of weight removal helped me that much when I weigh around 240lbs and had the wind resistance with the tops out and windows down.
#32
TECH Veteran
iTrader: (2)
Join Date: Nov 2001
Location: Warsaw, Va
Posts: 4,316
Likes: 0
Received 0 Likes
on
0 Posts
Bob, thanks man I doubt half the people believe you run those ET's.. just like many dont think some SI LS1's run mid 11's either since its H/C or PA cars running only 12's
i doubt that stang would run 13's probably at the track since the owner more than likely doesnt know wtf he's doing
but like you said, it sure as hell doesnt take a PA to run fast. You and ol wilwaxu both suck LMAO
i doubt that stang would run 13's probably at the track since the owner more than likely doesnt know wtf he's doing
but like you said, it sure as hell doesnt take a PA to run fast. You and ol wilwaxu both suck LMAO
#33
TECH Junkie
iTrader: (2)
Originally Posted by JDPZ28
ross87t,
I don't know what else was done to his car, he just said Procharger. Maybe he still had stock gearing too, that may have hurt him a little. With my mods, I would think I would be in the 380-390hp range before tuning. Also I do have all the free mods and !spare and back seats if that helps.
I don't know what else was done to his car, he just said Procharger. Maybe he still had stock gearing too, that may have hurt him a little. With my mods, I would think I would be in the 380-390hp range before tuning. Also I do have all the free mods and !spare and back seats if that helps.
#34
STF Veteran
iTrader: (8)
Join Date: Mar 2003
Location: lost in VA
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JDPZ28
First let me apologize for the shitty attitude. Second, Evilstang, you said you have seen Procharged cobras running deep in the twelves, but yet I have also seen bolt on, cam only LS1's also running deep in the 12's and even in the eleven's. Again sorry for the rant, just got a few beers in me
BTW, EVILSTANG, what part of NC are you in?
BTW, EVILSTANG, what part of NC are you in?
#35
Originally Posted by titanium barchetta
Nothing is wrong with it, just that you said cam ONLY. Weight reduction is serious drop in ET so tp say a car ran a 10 with only a cam is ludicrous.
#39
TECH Senior Member
Nice kill. I can't really contest it because I haven't seen too many blown Cobras, but I do know they had a lot of motor problems. Plus, you don't know how much he was boosting.
Seems like a pretty legit kill to me. Don't forget that he's got a cam and dyno'd 350 rwhp before it. Sounds pretty believable to me. Nice kill
Seems like a pretty legit kill to me. Don't forget that he's got a cam and dyno'd 350 rwhp before it. Sounds pretty believable to me. Nice kill
#40
On The Tree
Join Date: Oct 2003
Location: Atlanta,Ga
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99-LS1-SS
Me too!!
It is physically impossible for me to drive my car and not floor it. I have tried many times. I will always end up getting on it and I won't realize what I have done until it is too late.
It is physically impossible for me to drive my car and not floor it. I have tried many times. I will always end up getting on it and I won't realize what I have done until it is too late.
Yea .It almost KILLED me to drive 500 miles while breaking in the motor and clutch. .But at 501 it was on.