black 03-04 Cobra death!
#21
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I think you are missing the point like always. What you seem to be saying (and please correct me if I am wrong) is that a cammed LS1 will always or atleast most of the time beat a pullied/tuned 03-04 Cobra. What is trying to be said is you might have witnessed that but he beat the driver and it would not happen 9.8 times out of 10.
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Now you are saying "bolt on Cobra". Before it was "pullied/tuned Cobra". Make up your mind. You are worse than a ricer.
#23
#24
#25
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
And you aren't saying that you only witnessed a heavy vert with a bad setup get pulled by a cammed LS1?
Just want to clear up if you are saying you witnessed a pullied Cobra lose to a cammed LS1 or if you are saying a cammed LS1 will not get pulled by a pullied Cobra in general.
#27
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
SO what you are infact saying is a normal pullied/tuned 03/04 Cobra will not pull a cammed LS1?
And you aren't saying that you only witnessed a heavy vert with a bad setup get pulled by a cammed LS1?
Just want to clear up if you are saying you witnessed a pullied Cobra lose to a cammed LS1 or if you are saying a cammed LS1 will not get pulled by a pullied Cobra in general.
And you aren't saying that you only witnessed a heavy vert with a bad setup get pulled by a cammed LS1?
Just want to clear up if you are saying you witnessed a pullied Cobra lose to a cammed LS1 or if you are saying a cammed LS1 will not get pulled by a pullied Cobra in general.
#29
#30
10 Second Club
iTrader: (30)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It all depends on the pulley size and how well each car runs for what it has.. when I was cam only I pulled a pullied/tuned 04 cobra coupe 3 times in a row. I didn't rape him at all but I won about a car each time. He had 446/456 I believe with stock everything except the pulley and tune. Those cars are insane what what little mods you can do and how fast they are. It definitely takes a good combo in a cammed ls1 to beat a pullied/tuned cobra no doubt about it.
#31
Captain Double Post
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok you said stock,my bad,the one cobra I raced was pretty close out of a best of 3 ,was a pullied,bolt on 03,40 roll,he edged me out by a fender,he got the jump ,I didn't hear the 3rd honk,race 2 20 mph roll he spun a lil I hooked I won,race 3 from a dig won by a car at least,now this was the only one I have ever raced ,a few things I thought of,I think he was on street tires,and I know for sure I was the better driver by far,but imho I feel if he had better traction,and was a lil better at running out the gears I know he would have toasted me,I have a 99ss m6 ms4 cam,
#32
Captain Double Post
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well maybe not toasted me but it seems like he would jump out a lil and I would just slowley pull on him,the first race I was pulling pretty good and if it was a even start I feel I would have got that one also,I know in these I was against someone that was new to there car,it could of been his dads car he looked pretty young lol
#37
Teching In
Join Date: Oct 2009
Location: Nashville / Indianapolis
Posts: 18
Likes: 0
Received 2 Likes
on
2 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Engarde](https://ls1tech.com/forums/images/smilies3/engarde.gif)
haha yea that was great... Nice to have Kevin back here ha
#38
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
maybe if the terminator had the top down, was full of fat dudes and started off in the wrong gear...
i have an auto ls1 and at the time with just bolt-ons, i pulled on a terminator (not sure of mods) once, but it was short lived. he started regaining ground until we had to slow for traffic.
i have an auto ls1 and at the time with just bolt-ons, i pulled on a terminator (not sure of mods) once, but it was short lived. he started regaining ground until we had to slow for traffic.
#39
Teching In
Join Date: Nov 2010
Location: North Carolina
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just like I originally stated...I could run with with a bolt-on pullied Cobra for a certain time or mph especially with my gears and other bolt-ons...however once the speeds start increasing, my only advantage of my gears run out and the Cobra just keeps pulling. They really start to shine above 115 mph. At this point I already blew my load. Had it happen to me and there was nothing I could do...kinda of an "oh ****" feeling if anyone can relate. The Cobra's rate of acceleration was greater than mine at these speeds and it just starts to walk away.
Last edited by MACH32V; 12-12-2010 at 03:00 PM.
#40
Captain Double Post
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was more pointing that towards people that know nothing about ls1s,or think hey if I buy one and throw a cam in it ill rape 03 cobras,I hope you could tell yourself apart from that crowd,lol,I mean I just read a thread about freaking wire looms,anywho,since this kill thread is crap,who saw the new batman game preview ,looks pretty sweet,