Odarabla's infinite BS thread for the foreskinned (AKA Smack Down)
10 Second Club
iTrader: (14)
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
10 Second Club
iTrader: (14)
TECH Fanatic
iTrader: (55)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I agree with Hio. Should have let them go out of business. Snowbirds down here from Michigan can barely read and write yet their "second" home is worth more than many people's homes period.. Thanks to stupid mob run Unions they are grossly over paid. Hell I remember them(GM reps) taking private jets to DC to beg for money and being called out on it.
7 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Original PM:
His reply:
My replies:
His whining:
Me replying:
Originally Posted by audacious nick
He drives a 9 second LSX S13 among other cars.
Slightly faster than your orange Tranny.
Slightly faster than your orange Tranny.
Originally Posted by TRASHCAN
First of all who are u and why are u defending HIM? I don't give a **** how fast the car he drives is there always someone faster just like there is always someone that can beat that *** no matter how tough toy are. If u don't think we have 9 sec or better cars out here the ta isn't the only car I have either and I have plenty of fam, friends that have 10 or better street cars so anytime when the snow ain't flying come on down with anything u got and WE will b happy to spank that ***. I posted on wrong forum by accident buddy your friend didn't need to be a dick a was looking for advise not a smart *** talking **** internet or not....
Originally Posted by audacious nick
You asked what he drives, I answered you. And there may always be someone faster, but are you faster than him? Nope.
Originally Posted by audacious nick
And I'm not being a dick with that post, just truthful. Your tranny isn't faster than his car.
Also, did you ever learn English? If so, please type like it.
If you want to talk crap to him about how your buddies have faster cars(which is hilarious, since you can't rep for your own car being faster), please go to the srk forum and post in the offtopic thread.
Being that he runs mid-9s on his old setup, and his new one may be in the 8s, he probably has friends with faster cars than your friends.
PS, everything you reply with will be posted in the offtopic thread, so feel free to stop by. I'll be laughing.
Also, did you ever learn English? If so, please type like it.
If you want to talk crap to him about how your buddies have faster cars(which is hilarious, since you can't rep for your own car being faster), please go to the srk forum and post in the offtopic thread.
Being that he runs mid-9s on his old setup, and his new one may be in the 8s, he probably has friends with faster cars than your friends.
PS, everything you reply with will be posted in the offtopic thread, so feel free to stop by. I'll be laughing.
Originally Posted by TRASHCAN
whats hilarious is the fact your on his dick so much u need to keep in boxing me about how fast his car is. My tranny is my show, dd car in summer time so I don't care if his car is faster I have a ss mont 383 blow with a two stage set up looks like **** but it's a steer car aswell as a track car that runs 10 with out Nitris . I really don't see the point in having a dick measuring contest with u about your friend car.!!!!!!!!!
Originally Posted by audacious nick
What's nitris?
Must be a shitty show car if it already needs paint.
Must be a shitty show car if it already needs paint.
7 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Trashcan is awesome!
It's amazing what grade 3 gets you now-a-days. lol
It's amazing what grade 3 gets you now-a-days. lol
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
cheese and rice!
http://www.gmhightechperformance.com..._440ci_na_lsx/
http://www.gmhightechperformance.com..._440ci_na_lsx/
Our initial negotiations were quite tense, to say the least. When we arrived on site, the short-block was almost complete and practically every question was met with a sly smile and a "something like that" type of response. We hadn't even unloaded the camera equipment yet and still the papers were being covered, the parts being quietly stowed away. In all honesty, it wasn't very surprising to be met with this kind of apprehension. We were, after all, there to document the assembly of a naturally aspirated, 1,000-plus horsepower, 440 cubic-inch LSX engine, which was destined to compete in the insanely competitive NMCA LSX Challenge Series All Motor class. To say that information on an engine of this caliber is scarce would be an understatement. Truth be told, breaking the 1,000hp barrier with nothing more than raw atmospheric pressure and some gasoline is an almost impossible task for even the best LSX engine builders, which makes extracting information out of those that can do such a thing quite difficult. Luckily, however, we were not exactly strangers in this place and after some apprehensive moments, the brain trust at Pro Line Racing opened the floodgates.
What happened next was overwhelming. We know engine tricks here at GMHTP, but not on this level. Need a couple hundred horsepower increase with a stroker motor? We can handle that. Looking to bolt a blower on and tune it? That's easy stuff. Wondering what it takes to build a naturally aspirated race motor capable of producing over 2.3 hp per cubic-inch while still going rounds and lasting through races? You're going to have to call in the big guns. In case you're wondering, at 440 inches and 1,029 hp, this motor makes exactly 2.33 hp per cube, which is amazing considering a stock LS1 engine rated at 350 makes just 1.01 hp per cubic-inch. With no boost or nitrous, just the same atmospheric pressure and a throttle body, we're talking about an engine that is more than 2.3 times as efficient. Just think about that for a second while we start breaking out the parts list.
It all starts with an iron Chevrolet Performance LSX block, which was machined by Pro Line Racing to house eight 4.185-inch cylinder bores, billet main caps, a Jesel beltdrive, and a 4-inch Callies crankshaft. Special machining was also done to the lifter bores to allow for a set of keyed .937-inch solid roller lifters, along with massive 9/16-inch double taper pushrods. Inside, it's all about rotating weight, with the crankshaft cut down, lightweight BME aluminum 6.250-inch connecting rods, and specially designed Diamond pistons wrapped in ultra lightweight, super thin Total Seal rings. Up top, it's all about airflow, with Chevrolet Performance LSX-DR cylinder heads and a matching LSX-DR intake manifold. With 430 cfm of flow right out of the box, these heads can make some steam and the custom Pro Line Racing solid roller camshaft makes sure all the valve events happen exactly when they are needed. If you're looking for cam specs, you can forget it, although we will say it may or may not have over an inch of lift. As we said, this is serious business and if you are at all interested in high-end engine building with attention paid to every detail, we recommend you stick around a while and read through the rest of the story. Like the rulebook, we recommend you read between the lines in some spots...
Read more: http://www.gmhightechperformance.com...#ixzz2nPMsmJOH
What happened next was overwhelming. We know engine tricks here at GMHTP, but not on this level. Need a couple hundred horsepower increase with a stroker motor? We can handle that. Looking to bolt a blower on and tune it? That's easy stuff. Wondering what it takes to build a naturally aspirated race motor capable of producing over 2.3 hp per cubic-inch while still going rounds and lasting through races? You're going to have to call in the big guns. In case you're wondering, at 440 inches and 1,029 hp, this motor makes exactly 2.33 hp per cube, which is amazing considering a stock LS1 engine rated at 350 makes just 1.01 hp per cubic-inch. With no boost or nitrous, just the same atmospheric pressure and a throttle body, we're talking about an engine that is more than 2.3 times as efficient. Just think about that for a second while we start breaking out the parts list.
It all starts with an iron Chevrolet Performance LSX block, which was machined by Pro Line Racing to house eight 4.185-inch cylinder bores, billet main caps, a Jesel beltdrive, and a 4-inch Callies crankshaft. Special machining was also done to the lifter bores to allow for a set of keyed .937-inch solid roller lifters, along with massive 9/16-inch double taper pushrods. Inside, it's all about rotating weight, with the crankshaft cut down, lightweight BME aluminum 6.250-inch connecting rods, and specially designed Diamond pistons wrapped in ultra lightweight, super thin Total Seal rings. Up top, it's all about airflow, with Chevrolet Performance LSX-DR cylinder heads and a matching LSX-DR intake manifold. With 430 cfm of flow right out of the box, these heads can make some steam and the custom Pro Line Racing solid roller camshaft makes sure all the valve events happen exactly when they are needed. If you're looking for cam specs, you can forget it, although we will say it may or may not have over an inch of lift. As we said, this is serious business and if you are at all interested in high-end engine building with attention paid to every detail, we recommend you stick around a while and read through the rest of the story. Like the rulebook, we recommend you read between the lines in some spots...
Read more: http://www.gmhightechperformance.com...#ixzz2nPMsmJOH
Staging Lane
Join Date: Aug 2009
Location: Rent Free in Hio's Mind
Posts: 84
Likes: 0
Received 36 Likes
on
31 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)