Odarabla's infinite BS thread for the foreskinned (AKA Smack Down)
Moderator
iTrader: (15)
Anybody have a problem with me opening a new BS thread and retiring this one?
TECH Fanatic
iTrader: (6)
Join Date: Sep 2008
Location: DSM
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
**** this thread sucks ***. I've PMed Jay about it.
PM me what you'd want on the 4l80e and some info..
There's a local Lq4 engine that has 36k or so on it, guy wants $700. Oil pan and intake are trashed but otherwise says it is good. Since I'm planning a 408, all I really need is the block and heads...but on that note, I could buy this, stud it, and run it for a while and save a bit of cash up and build when it blows/when I'm ready instead.
PM me what you'd want on the 4l80e and some info..
There's a local Lq4 engine that has 36k or so on it, guy wants $700. Oil pan and intake are trashed but otherwise says it is good. Since I'm planning a 408, all I really need is the block and heads...but on that note, I could buy this, stud it, and run it for a while and save a bit of cash up and build when it blows/when I'm ready instead.
Do it
10 Second Club
No it doesn't. If that were true then by definition, ANY modification would then change the displacement of an engine since it gives the feeling of a larger engine due to the increase of power.
A blower does not change the dynamic compression of a motor. A cam does.
Do you think compression (whether it's static or dynamic) is a critical part of the motor? Be honest.
-Mark
A blower does not change the dynamic compression of a motor. A cam does.
Do you think compression (whether it's static or dynamic) is a critical part of the motor? Be honest.
-Mark