What have you done to your car recently?
#245
TECH Resident
Join Date: Mar 2002
Location: North Las Vegas, NV
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
Did the following this week...
1. Tossed the stock power steering cooler and added an aftermarket frame rail mount PSC. Also flushed the fluid. It was nasty brown.
2. Flushed the cooling system. Burping it tomorrow. (Took today off and didn't want to wake the kids up last night by starting the car)
3. Rotated the tires and checked air pressure.
4. Running lines for front brakes. Using the air pump as the air supply. This is the last thing I will get finished. See air pump section on post #1. Thanks Jim! https://ls1tech.com/forums/suspensio...-20-bucks.html
5. Changed out the transmission fluid.
Next month.
1. Smog/Register
2. Pan hard bar
3. Alignment
4. Brake fluid swap.
1. Tossed the stock power steering cooler and added an aftermarket frame rail mount PSC. Also flushed the fluid. It was nasty brown.
2. Flushed the cooling system. Burping it tomorrow. (Took today off and didn't want to wake the kids up last night by starting the car)
3. Rotated the tires and checked air pressure.
4. Running lines for front brakes. Using the air pump as the air supply. This is the last thing I will get finished. See air pump section on post #1. Thanks Jim! https://ls1tech.com/forums/suspensio...-20-bucks.html
5. Changed out the transmission fluid.
Next month.
1. Smog/Register
2. Pan hard bar
3. Alignment
4. Brake fluid swap.
Last edited by DarkblueTA; 11-22-2012 at 10:23 PM. Reason: link
#248
TECH Enthusiast
bought a different manual brake delete system. smaller bore should make it easier to stop. had UPR, switched to aerospace system. installed the ABS delete manifold, putting line lock on delete manifold soon.
#257
9 Second Club
iTrader: (10)
Join Date: Apr 2009
Location: Joliet,IL and Las Vegas 50/50
Posts: 1,230
Likes: 0
Received 3 Likes
on
3 Posts
billet 76? im going to switch to a billet wheel, tune run for WHILE then 80mm.
bought a different manual brake delete system. smaller bore should make it easier to stop. had UPR, switched to aerospace system. installed the ABS delete manifold, putting line lock on delete manifold soon.
bought a different manual brake delete system. smaller bore should make it easier to stop. had UPR, switched to aerospace system. installed the ABS delete manifold, putting line lock on delete manifold soon.
How was the trans swap? doing mine in a week.
#259
TECH Enthusiast
Topped off the E85 and buffed a scratch out of the drivers side fender lol.