What have you done to your car recently?
#229
TECH Fanatic
iTrader: (5)
Join Date: Dec 2007
Location: Rochester, NY
Posts: 1,450
Likes: 0
Received 0 Likes
on
0 Posts
A good friend had a spare that he gave to me. Can't go wrong with free! I don't race it that much. The slicks were me attempting to get my "man card" back at the track because I ran pretty slow my last to time out because I couldn't launch on street tires. 12.3 @ 118.X with a 2.05 60'.
I wanted to just get 1 low 11 second pass and I would have been thrilled. Not sure if I'm ready for a second attempt on the slicks. We'll see!
I wanted to just get 1 low 11 second pass and I would have been thrilled. Not sure if I'm ready for a second attempt on the slicks. We'll see!
#230
TECH Senior Member
iTrader: (5)
I started, and drove my car for the first time in roughly 2 years (give or take). I swapped to a cam I have used in the past,..or something close anyways. The car now idles on its own. I still have bugs to work out but, it feels pretty good. Also started a fox body LSX turbo build which will be a dedicated dig/slow roll car. Should be fun. Here's the current status...neither car is finished...the vette will go under a vacuum line revamp soon...
Anywho...
removing the wireing harness sucked
I have motor and turbos for the mustang, modding V bands on truck manifolds this weekend....need to either make motor mounts or fab something up. Anyways,...I have been busy.
Anywho...
removing the wireing harness sucked
I have motor and turbos for the mustang, modding V bands on truck manifolds this weekend....need to either make motor mounts or fab something up. Anyways,...I have been busy.
#234
TECH Enthusiast
i literally havent touched the motor on the stand since....well i forget... wife got sick of the car in the garage so i finished the last things...
wastegate installed, exhaust wrapped, both O2 sensor bungs and sensors installed. motor in car. i guess i'll finish it now that i HAVE to. lol.
gonna drive it low boost and tune on it, then add powerglide. flywheel is SFI powerglide/th400 patterned. one step at a time.
wastegate installed, exhaust wrapped, both O2 sensor bungs and sensors installed. motor in car. i guess i'll finish it now that i HAVE to. lol.
gonna drive it low boost and tune on it, then add powerglide. flywheel is SFI powerglide/th400 patterned. one step at a time.
#235
TECH Junkie
iTrader: (4)
since my last post i have done the following:
long tubes, ory, and fm 10 series muffler
chrs1313 ram air setup
ls6 intake manifold
ls6 clutch and oem replacement hydraulics
390 gears
debating what to spend my tax return on. a new engine or a bunch of little supporting **** for this one. prob end up going with a 9", suspension, racetronix hotwire kit, fast 92 and a plate kit. i just want to see 11.9s on motor and 10s on a shot. i'd be happy with that.
long tubes, ory, and fm 10 series muffler
chrs1313 ram air setup
ls6 intake manifold
ls6 clutch and oem replacement hydraulics
390 gears
debating what to spend my tax return on. a new engine or a bunch of little supporting **** for this one. prob end up going with a 9", suspension, racetronix hotwire kit, fast 92 and a plate kit. i just want to see 11.9s on motor and 10s on a shot. i'd be happy with that.
#237
On The Tree
Join Date: Apr 2009
Location: jacksonville ar
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I hit a Danm light pole at a local drift event trying to drift my vette time to learn fiberglass repair oh and leave the drifting to a cheaper car I have always wanted a 90's t-bird wounder how the slide to Craig's list