Boosted S2000 owner ....HioSSilver is full of SH!T
08-17-2011, 06:37 PM
#61
10 Second Club
iTrader: (8)
he didnt beat me, i gave him a head start twice on out 60 + mph roll on. You can kiss my ***. I think if you would of ran him later on that night and at that mph your alls out come would of been differant. I'm not the only one who calls you out to run me. Other people have mention it too.
You know I'm tryin to conserve the car till I get to the track again so stop thinkin your callin someone out constantly. You called me out when you were test driveing that fucken thing callin me out before you even bought it. You've been out run every time.
08-17-2011, 07:23 PM
#63
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
As old as you claim that you are; you should know that driving a car 4 hours to race it is not exactly the brightest thing to do.
What if he or you broke something that you can't fix on the spot (ie.clutch disc come apart). That's a long way from home to be stranded, when you could just put the car back on the trailer and tow it home.
08-17-2011, 07:47 PM
#64
I mean I've seen the car....I see the idiot owner that can't spell or understand the basic English language....yet I cannot put the two together. I don't understand how a square and a circle fit together.
08-17-2011, 08:33 PM
#67
TECH Enthusiast
Join Date: Aug 2005
Location: crossett, Arkansas
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
i wouldnt bash the skinny guys to much. some of the "heavy weights" on these forums best mod would be have there car break so they have to walk a while.
08-17-2011, 09:03 PM
#69
10 Second Club
iTrader: (8)
As old as you claim that you are; you should know that driving a car 4 hours to race it is not exactly the brightest thing to do.
What if he or you broke something that you can't fix on the spot (ie.clutch disc come apart). That's a long way from home to be stranded, when you could just put the car back on the trailer and tow it home.
What if he or you broke something that you can't fix on the spot (ie.clutch disc come apart). That's a long way from home to be stranded, when you could just put the car back on the trailer and tow it home.
Hell I used to drive it 2.5 hrs to MIR and run it and drive home.
08-18-2011, 06:36 AM
#73
Teching In
iTrader: (2)
Join Date: Jul 2011
Location: Winchester,Va
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Its a 03 mach one. engine is 100% stock, never has had the valve covers off. It has a mmr turbo kit with a 70mm master power turbo. Its on 7.5 psi,has 42 lb injectors, blow thur mass air. tuned on a sct. Needs retuned ,just went to a 750hp percision fm and differant inter cooler piping. Has stock gears, has a t56 out of an 04 cobra. Last time it was dyno'ed it made around 440hp and 465 ftlbs of torque. Its full weight execpt for a tubular k member,needed for the turbo kit. Right around 3500 with me in it, im 220
08-18-2011, 07:15 AM
#75
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Its a 03 mach one. engine is 100% stock, never has had the valve covers off. It has a mmr turbo kit with a 70mm master power turbo. Its on 7.5 psi,has 42 lb injectors, blow thur mass air. tuned on a sct. Needs retuned ,just went to a 750hp percision fm and differant inter cooler piping. Has stock gears, has a t56 out of an 04 cobra. Last time it was dyno'ed it made around 440hp and 465 ftlbs of torque. Its full weight execpt for a tubular k member,needed for the turbo kit. Right around 3500 with me in it, im 220
I'm sure you already know that if you go any higher in power; you'll have a new bay window in your block.
08-18-2011, 11:40 AM
#78
Teching In
iTrader: (2)
Join Date: Jul 2011
Location: Winchester,Va
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
08-18-2011, 11:50 AM
#79
Teching In
Join Date: May 2009
Location: bourbonnais ill
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Its a 03 mach one. engine is 100% stock, never has had the valve covers off. It has a mmr turbo kit with a 70mm master power turbo. Its on 7.5 psi,has 42 lb injectors, blow thur mass air. tuned on a sct. Needs retuned ,just went to a 750hp percision fm and differant inter cooler piping. Has stock gears, has a t56 out of an 04 cobra. Last time it was dyno'ed it made around 440hp and 465 ftlbs of torque. Its full weight execpt for a tubular k member,needed for the turbo kit. Right around 3500 with me in it, im 220