Chrysler wasted my gas
09-08-2011, 07:21 PM
#924
Launching!
iTrader: (1)
Join Date: Sep 2009
Location: Gulfport, MS / Columbus, OH
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm trying to do the math in my head, if you're almost 48 then you would have been 21 in what..1984? so you were 15 years ahead of time and owned a 99 cobra? also...very impressive sir.
09-08-2011, 07:29 PM
#926
Launching!
iTrader: (1)
Join Date: Sep 2009
Location: Gulfport, MS / Columbus, OH
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
WSsick, for the record the car I had before I had my 02 WS6 was a 99 Trans Am with LTs, ORY, Catback, lid, supporting mods and a ZEX kit....and I had that when I was 19 so I know a thing or two about nitrous also and plan to put a kit on this car.
09-08-2011, 07:36 PM
#928
Cool story bro.
09-08-2011, 07:49 PM
#932
Never got it to the track. Father passed away right after him and I set the pinion angle. The next few weeks was going to be it's first time at the track since the N/A build. After that I lost interest in that car. To this day I really don't care to take it to the track.
09-08-2011, 07:53 PM
#933
Banned
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Never got it to the track. Father passed away right after him and I set the pinion angle. The next few weeks was going to be it's first time at the track since the N/A build. After that I lost interest in that car. To this day I really don't care to take it to the track.
09-08-2011, 07:59 PM
#934
4.30 gears
35 spline spooled rear
90/10s front
10 ways rear @ 6
Moser drags up front
cut stock rear springs
bigs/littles
Weight taken out
Launch RPM should be between 6,000-6,500rpms with a shift point of 6,500-7,400rpms.
You do the math or if you want to meet in ATL I can be talked into running your Mach at the track. However before I go my old N91 is going back in with the box upper.
09-08-2011, 09:03 PM
#937
09-08-2011, 09:08 PM
#938
09-08-2011, 09:14 PM
#940
Banned
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I'm pretty sure it could run mid 12's @ 111mph with me starting in 4th gear. Here is the basics...
4.30 gears
35 spline spooled rear
90/10s front
10 ways rear @ 6
Moser drags up front
cut stock rear springs
bigs/littles
Weight taken out
Launch RPM should be between 6,000-6,500rpms with a shift point of 6,500-7,400rpms.
You do the math or if you want to meet in ATL I can be talked into running your Mach at the track. However before I go my old N91 is going back in with the box upper.
4.30 gears
35 spline spooled rear
90/10s front
10 ways rear @ 6
Moser drags up front
cut stock rear springs
bigs/littles
Weight taken out
Launch RPM should be between 6,000-6,500rpms with a shift point of 6,500-7,400rpms.
You do the math or if you want to meet in ATL I can be talked into running your Mach at the track. However before I go my old N91 is going back in with the box upper.