03turbomach1 vs built honda 500+ whp
#1
03turbomach1 vs built honda 500+ whp
So I was at work yesterday and Nathan (92cobranotch) called me and told me that a local guy from winchester was getting his civic tuned at cnc engine. They wouldn't tell me what it made, but they told me it was nasty and I shouldn't do a roll with him. I really don't like roll racing anyway, but that all that they wanna do anymore.
So after standing around and bsing for a bit(nobody else showed up to run that was suppose to). I told him I'd give him his race if he took me for a ride. I wanted to see how many pounds it was on. So we went for a ride, saw it was on 20 psi.
If you dont know, my car is stock with a mmr turbo kit. Has a master power 70mm turbo and its on 7.5psi. Made 438hp though a tr3650. It has a T56 in it now. Stock 3.55 gears, stock 4.6 dohc.
The civic is a 2.0L. Has been sleeved. they said it has 9.75 comp and itr cams. Found out it made 528 on the dyno today.
1st race- Did a roll race at 50 mph, I honked 3 times and we took off, mine popped out of 3rd so I let out.... Honda 1 Mustang 0
2nd race- roll at 45, I honk 3 times and pull away bad, can't guess how many cars- he took off in 3rd so we decided to do it one more time, Honda 1 Mustang 1
3rd race- roll on at 50ish, I honk 3 times and pull a couple cars, I hit 3rd and I hear him shift about the same time, as i pull fourth i see him comes up some in the rear view, I stay out on him and at about 120 I really pulled away hard, I looked up and saw 4 ways in my mirror. Mustang 2, Honda blown up...
Hio should be posting the video soon.
So after standing around and bsing for a bit(nobody else showed up to run that was suppose to). I told him I'd give him his race if he took me for a ride. I wanted to see how many pounds it was on. So we went for a ride, saw it was on 20 psi.
If you dont know, my car is stock with a mmr turbo kit. Has a master power 70mm turbo and its on 7.5psi. Made 438hp though a tr3650. It has a T56 in it now. Stock 3.55 gears, stock 4.6 dohc.
The civic is a 2.0L. Has been sleeved. they said it has 9.75 comp and itr cams. Found out it made 528 on the dyno today.
1st race- Did a roll race at 50 mph, I honked 3 times and we took off, mine popped out of 3rd so I let out.... Honda 1 Mustang 0
2nd race- roll at 45, I honk 3 times and pull away bad, can't guess how many cars- he took off in 3rd so we decided to do it one more time, Honda 1 Mustang 1
3rd race- roll on at 50ish, I honk 3 times and pull a couple cars, I hit 3rd and I hear him shift about the same time, as i pull fourth i see him comes up some in the rear view, I stay out on him and at about 120 I really pulled away hard, I looked up and saw 4 ways in my mirror. Mustang 2, Honda blown up...
Hio should be posting the video soon.
Last edited by 03turbomach1; 04-20-2012 at 07:19 AM.
#2
Sorry for the crappy vids. I had my phone on the wrong setting. Vids taken from a termi swap notch. See guys, I even ride in Mustangs....lol
http://youtu.be/CxxdFjzdnpI
http://youtu.be/QJU9VtpezM0
http://youtu.be/7G3Fe4DPR8k
http://youtu.be/CxxdFjzdnpI
http://youtu.be/QJU9VtpezM0
http://youtu.be/7G3Fe4DPR8k
#7
Trending Topics
#9
#10
#12
#13
Ouch.... damn donnie. Seemed to pull nice and smooth when i rode in it. It was on 22 psi on pump gas. I asked him if they had a way to run around on a lower boost tune than at times turn it up. He told me they didn't give him that option. I had a bad feeling it wasn't gonna make it....
I think they fly Chris Miller in to tune, I've always heard he is really good
I think they fly Chris Miller in to tune, I've always heard he is really good
#14
I used to run mid 20s on pump with my Talon. I'm just going by their track record, which seems to suck. I think Arbogast cursed all of the fast Hondas in this area. Nobody else is meant to have one.
#15
All plugs in civic were snow white and porcelin was missing along with all the tips. and the tops of pistons looked like they were hit with a doting punch. could be tune. or could be fuel pump, vac leak etc. that caused it. ill have more info on it later
#16
allthough several ppl. confirmed wheel spin on the dyno in the upper rpm range wich means the car was unloading. so i dont see how they could get a good tune in the upper range with excessive wheel spin? and the upper range is where it poped
#17
Ouch.... damn donnie. Seemed to pull nice and smooth when i rode in it. It was on 22 psi on pump gas. I asked him if they had a way to run around on a lower boost tune than at times turn it up. He told me they didn't give him that option. I had a bad feeling it wasn't gonna make it....
I think they fly Chris Miller in to tune, I've always heard he is really good
I think they fly Chris Miller in to tune, I've always heard he is really good
http://www.facebook.com/#!/photo.php?v=388989027799004