Street Racing & Kill Stories Basic Technical Questions & Advice

intake only 2006 GTO vs eaton swapped Mach 1 **VID**

Thread Tools
 
Search this Thread
 
Old 05-17-2012, 06:14 PM
  #1241  
Launching!
iTrader: (10)
 
O-FiveCC's Avatar
 
Join Date: Dec 2008
Location: Winter Springs, FL
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

03/04 Cobra's are one of my all time Favs. I want to run a tuned Cobra with one mod June 3rd at the track. If they weren't so damned expensive....
Old 05-17-2012, 06:15 PM
  #1242  
Teching In
iTrader: (2)
 
NiteRiderWS6's Avatar
 
Join Date: May 2007
Location: Socal
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by O-FiveCC
LXforums is the big mother forum like LS1tech for mopar. SRT8oc is kind of small
Old 05-17-2012, 06:26 PM
  #1243  
Banned
 
automach1's Avatar
 
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Cwarta
Thank you very much for proving me previous statement
h/c car going 11.8s lol Not sure how you can talk down towards machs in a ls1 gto
Old 05-17-2012, 06:27 PM
  #1244  
Launching!
iTrader: (10)
 
O-FiveCC's Avatar
 
Join Date: Dec 2008
Location: Winter Springs, FL
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by NiteRiderWS6
LXforums is the big mother forum like LS1tech for mopar. SRT8oc is kind of small
Thanks man. I will post over there. Damn I wish I could run your car lol
Old 05-17-2012, 06:33 PM
  #1245  
Banned
 
automach1's Avatar
 
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by GotHemi?
Just curious. Can anyone post videos of a real life Mach 1 that runs hard?? At least a 11sec NA Mach? Or a 10sec fi Mach?? Or a single LEGIT video of a Mach 1 pulling on a worthy car??

Machs are supposed to do this and that with just bolt ons but yet i cant find any proof of it. You search the internet and all you find is they types of videos that are all in this thread. Mostly 13 sec cars racing and 9 out of 10 times the Mach is the one getting beat.

I just want some proof. Now. Not in 3 months when your girlfriends cousins brother in law is finished building his bad *** Mach. Also im going to need LOTS of proof to make me believe that Machs are 11sec bolt on cars...

Boom here is a vid my car was not even a full bolt-on car running a ~119 mph cobra from 20-125
http://www.youtube.com/watch?v=w7EkqMMmmMM
Old 05-17-2012, 06:38 PM
  #1246  
Launching!
iTrader: (10)
 
O-FiveCC's Avatar
 
Join Date: Dec 2008
Location: Winter Springs, FL
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

Niterider, give me some support so these guys will come out.: http://www.lxforums.com/board/f99/tr...6/#post4086005

Last edited by O-FiveCC; 05-18-2012 at 07:02 AM.
Old 05-17-2012, 06:39 PM
  #1247  
Launching!
iTrader: (10)
 
O-FiveCC's Avatar
 
Join Date: Dec 2008
Location: Winter Springs, FL
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

Damn automach, you jumped out, but he was reeling you in like no other lol
Old 05-17-2012, 06:45 PM
  #1248  
Teching In
iTrader: (2)
 
NiteRiderWS6's Avatar
 
Join Date: May 2007
Location: Socal
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by automach1
Boom here is a vid my car was not even a full bolt-on car running a ~119 mph cobra from 20-125
http://www.youtube.com/watch?v=w7EkqMMmmMM
Bolt on weight reduction mach 1, I remember when you posted this on SVTP and the **** storm it caused.
Old 05-17-2012, 07:04 PM
  #1249  
TECH Resident
iTrader: (8)
 
camaroboy14's Avatar
 
Join Date: Oct 2009
Location: spangdahlem/bruch germany
Posts: 881
Likes: 0
Received 0 Likes on 0 Posts
Default

Quick Mach!! There is one here that ran a 12.9 with drag suspension, slicks, 4:30(I think) gears, 125 shot .. But that's the race wars .. The track is like street and not prepped and is slightly up hill .. Plus I think the da sucks here.. I ran a 13.7 :/ with shitty rear tires ..
Old 05-17-2012, 07:06 PM
  #1250  
Launching!
iTrader: (10)
 
O-FiveCC's Avatar
 
Join Date: Dec 2008
Location: Winter Springs, FL
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

Mach's are slow. Come to my June 3rd race and see what's up
Old 05-17-2012, 07:25 PM
  #1251  
TECH Fanatic
iTrader: (12)
 
Cwarta's Avatar
 
Join Date: May 2012
Location: Elm Creek, NE
Posts: 1,796
Received 58 Likes on 48 Posts

Default

Originally Posted by automach1
h/c car going 11.8s lol Not sure how you can talk down towards machs in a ls1 gto
WTF are you talking about? Never posted any time for my car??

ANd again, thank you for further reinforcing my point.
Old 05-17-2012, 07:26 PM
  #1252  
Banned
iTrader: (3)
 
adamantium's Avatar
 
Join Date: Sep 2011
Location: From the abyss
Posts: 942
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by automach1
h/c car going 11.8s lol Not sure how you can talk down towards machs in a ls1 gto
lol theres a bolt on ls1 gto that ran 11s so....yeah.
Old 05-17-2012, 07:32 PM
  #1253  
12 Second Club
 
willys srt8's Avatar
 
Join Date: Dec 2007
Location: Everywhere
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by O-FiveCC
http://chargerforumz.com/forumdisplay.php?f=140

I don't hang out there anymore. They can be as delusional as some of the ppl here.

http://mustangforums.com/forum/street-strip-25/



And the forum races begin...... LOL

Last edited by willys srt8; 05-17-2012 at 07:51 PM.
Old 05-17-2012, 07:36 PM
  #1254  
TECH Fanatic
iTrader: (12)
 
Cwarta's Avatar
 
Join Date: May 2012
Location: Elm Creek, NE
Posts: 1,796
Received 58 Likes on 48 Posts

Default

What by chance are you running for gears in that vid? ANd i like how you let of as he was about to dust your ***....
Old 05-17-2012, 07:38 PM
  #1255  
TECH Apprentice
Thread Starter
iTrader: (20)
 
NightmareTA's Avatar
 
Join Date: Jul 2009
Location: Liberal land
Posts: 390
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by whatsnext
So a 2010 Camaro needed two mods to beat a 2003 mach with tires,gears and a tune ? Wow that's impressive , what I do not understand is how does a eaton swapped mach not run better than a stock cobra would?
Just gonna throw this out there...

Mach 1's were impressive after the craptastic 2V 4.6 run that ford had. I remember back in 03-04, the mach 1 was the only N/A stang since 98 that could hang with the F bodies. There were plenty of close *** races I remember seeing back then, and they were def respectable cars.

Fast forward to now....we have a 5.0 mustang that makes 412 HP stock, a camaro SS that makes 425 HP stock, and even a 2005-2006 GTO makes 400 HP stock. A few bolt ons and a tune will get you damn close to 475 flywheel HP. It's no **** that a mach 1 is not as impressive...the cars are almost 10 years old now. Hell, even the 03-04 cobras don't seem like the total street monsters that they once were.

Times are changing, and like it or not, technology will always be faster. Not really sure what the argument is here. Sure, mach 1's are still pretty impressive for what they are, but compared to todays standards, they just don't have the power potential that modern cars have. And thats really all there is to it.
Old 05-17-2012, 07:38 PM
  #1256  
Staging Lane
 
GotHemi?'s Avatar
 
Join Date: Nov 2009
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by automach1
Boom here is a vid my car was not even a full bolt-on car running a ~119 mph cobra from 20-125
http://www.youtube.com/watch?v=w7EkqMMmmMM
See what im saying its NEVER a LEGIT video. You CLAIM its a 119mph car, u get a huge hit then get reeled in HARD and the camera cuts off just as its passing you up.

Also i need PROOF of these low 11 125mph Machs...

They have 26 6.1 SRT's where im from that run 10's with a t stat and a throttle body spacer...believe me??


Originally Posted by O-FiveCC
Niterider, give me some support so these guys will come out.: http://www.lxforums.com/board/f99/tr...6/#post4086005

Also, I see the Mercedes you have. I pulled on an SLK 55 AMG from 80-140 by 2.5 cars and he got about a 2 second hit. Since you have a Merc, I figured you could tell me what I could do. I've seen 12.2 at 112 stock from them....
I just posted... Robert@SHR
Old 05-17-2012, 07:54 PM
  #1257  
TECH Fanatic
iTrader: (12)
 
Cwarta's Avatar
 
Join Date: May 2012
Location: Elm Creek, NE
Posts: 1,796
Received 58 Likes on 48 Posts

Default

^^^^ boom!
Old 05-17-2012, 07:55 PM
  #1258  
Banned
iTrader: (3)
 
adamantium's Avatar
 
Join Date: Sep 2011
Location: From the abyss
Posts: 942
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by GotHemi?
See what im saying its NEVER a LEGIT video. You CLAIM its a 119mph car, u get a huge hit then get reeled in HARD and the camera cuts off just as its passing you up.

Also i need PROOF of these low 11 125mph Machs...

They have 26 6.1 SRT's where im from that run 10's with a t stat and a throttle body spacer...believe me??




I just posted... Robert@SHR
lol heres the funny part, look what happens when the cobra actually has traction.

http://www.youtube.com/watch?v=a6ymfmGLN7U
Old 05-17-2012, 07:56 PM
  #1259  
Launching!
 
SVTconfused's Avatar
 
Join Date: Jan 2012
Location: Clayton, De
Posts: 289
Likes: 0
Received 1 Like on 1 Post
Default

cobra was fully forged... where as the mach's had the leftover 99-01 cobra motors without forged goodies...

cobras can turn up the wick more from factory
Old 05-17-2012, 08:01 PM
  #1260  
Teching In
 
MACH32V's Avatar
 
Join Date: Nov 2010
Location: North Carolina
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by SVTconfused
cobra was fully forged... where as the mach's had the leftover 99-01 cobra motors without forged goodies...

cobras can turn up the wick more from factory
MACH 1 M5 has forged crank. just an FYI..


Quick Reply: intake only 2006 GTO vs eaton swapped Mach 1 **VID**



All times are GMT -5. The time now is 07:24 PM.