c6 vs gt500 vs 5.0
#162
TECH Addict
iTrader: (7)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When did pullied GT500's get so slow? When I had my Camaro that trapped anywhere from 117 to 121 depending on the weather and track, I got MURDERED by every pullied one I raced on the highway. Not just a car or two, but closer to half a dozen lengths through a few gears at best for me. These were basic pullied GT500's making low/mid 500's, the strongest one just over 550 with a smaller pulley and supporting mods. And they were not newer GT500's since the newer ones weren't even out when I had my Z28.
Did I miss something?
Did I miss something?
#163
TECH Senior Member
iTrader: (71)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I want to see the dig at the track, no reason it can't be done.
Its funny that autocock is trying to hold the race off so he can mod more, because he knows he needs it..... Funny why? Because the longer he waits the more mods mike is going to have.
I thought the race was supposed to happen at current mod state? I think if autocock gets to keep upping the boost etc etc that it should be run what you brung, ie mike sprays.... Aka autocock getting trampled all over at anything from a dig to a 120mph roll.
Its funny that autocock is trying to hold the race off so he can mod more, because he knows he needs it..... Funny why? Because the longer he waits the more mods mike is going to have.
I thought the race was supposed to happen at current mod state? I think if autocock gets to keep upping the boost etc etc that it should be run what you brung, ie mike sprays.... Aka autocock getting trampled all over at anything from a dig to a 120mph roll.
#165
Banned
Thread Starter
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Anybody else notice that he continues to spell "won't" as "want".....
More proof that this is some teenager who doesn't even own a car, or some unemployed loser who sits around finding youtube videos of his dream car and calls it his own.
Waiting for incredibly witty response such as "No I'm not, you are"
More proof that this is some teenager who doesn't even own a car, or some unemployed loser who sits around finding youtube videos of his dream car and calls it his own.
Waiting for incredibly witty response such as "No I'm not, you are"
#166
TECH Apprentice
Join Date: Dec 2011
Location: Maryland, but home in Detroit alot!
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mike stop posting pics of cars and timeslips... your scaring him into delaying to mod up...
Maybe after he is done secret modding his car there can be a middle ground race... Say... Georgia... I know some people there would love to run!
Maybe after he is done secret modding his car there can be a middle ground race... Say... Georgia... I know some people there would love to run!
#168
Banned
Thread Starter
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I want to see the dig at the track, no reason it can't be done.
Its funny that autocock is trying to hold the race off so he can mod more, because he knows he needs it..... Funny why? Because the longer he waits the more mods mike is going to have.
I thought the race was supposed to happen at current mod state? I think if autocock gets to keep upping the boost etc etc that it should be run what you brung, ie mike sprays.... Aka autocock getting trampled all over at anything from a dig to a 120mph roll.
Its funny that autocock is trying to hold the race off so he can mod more, because he knows he needs it..... Funny why? Because the longer he waits the more mods mike is going to have.
I thought the race was supposed to happen at current mod state? I think if autocock gets to keep upping the boost etc etc that it should be run what you brung, ie mike sprays.... Aka autocock getting trampled all over at anything from a dig to a 120mph roll.
#170
TECH Fanatic
iTrader: (55)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I still have other cars I have not shown yet.
My car goes to Hio. Weight reduction mods,402 install(LS2 based motor),Mamo Fast,lightweight brake rotors front,Lightweight battery,K member,Light weight starter,header upgrade,SS wing install and oil pan flap(1 pound lighter) next time its out....
Looking into light weight ss hood and wing as next round of mods.
#171
TECH Senior Member
iTrader: (71)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
At least you admit if it is run what you brung it would be embarrassing...
#172
Banned
Thread Starter
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#173
Banned
Thread Starter
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When did pullied GT500's get so slow? When I had my Camaro that trapped anywhere from 117 to 121 depending on the weather and track, I got MURDERED by every pullied one I raced on the highway. Not just a car or two, but closer to half a dozen lengths through a few gears at best for me. These were basic pullied GT500's making low/mid 500's, the strongest one just over 550 with a smaller pulley and supporting mods. And they were not newer GT500's since the newer ones weren't even out when I had my Z28.
Did I miss something?
Did I miss something?
Last edited by automach1; 12-20-2012 at 10:07 AM.
#175
Banned
Thread Starter
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't mind showing what I have. Its all for fun and I don't have anything to prove. I just did it to prove I have what I have since he was saying otherwise and can't prove what he has.
I still have other cars I have not shown yet.
We been down this road twenty times. Stop trying to save face. You can not be trusted.
My car goes to Hio. Weight reduction mods,402 install(LS2 based motor),Mamo Fast,lightweight brake rotors front,Lightweight battery,K member,Light weight starter,header upgrade,SS wing install and oil pan flap(1 pound lighter) next time its out....
Looking into light weight ss hood and wing as next round of mods.
I still have other cars I have not shown yet.
We been down this road twenty times. Stop trying to save face. You can not be trusted.
My car goes to Hio. Weight reduction mods,402 install(LS2 based motor),Mamo Fast,lightweight brake rotors front,Lightweight battery,K member,Light weight starter,header upgrade,SS wing install and oil pan flap(1 pound lighter) next time its out....
Looking into light weight ss hood and wing as next round of mods.
Last edited by automach1; 12-20-2012 at 10:11 AM.
#177
Banned
Thread Starter
Join Date: Dec 2010
Location: South MS
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#178
TECH Senior Member
iTrader: (71)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
How about talking about when you are both able to make it? That is usually how this kind of thing works. Not... Make a 14+ hour trip, but i pull a date out of my *** and if you can't make it you're all talk. What kind of **** is that?
I know for a fact even if you offered to pay me 500$ to come race that day, win or lose, I wouldn't be able to make it.
I know for a fact even if you offered to pay me 500$ to come race that day, win or lose, I wouldn't be able to make it.
#180
TECH Apprentice
Join Date: Dec 2011
Location: Maryland, but home in Detroit alot!
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thats what i'm saying...lol. There is a great dragstrip in Steel Alabama you can go to or tons of them in GA... If you go the Georgia route a certain almost stock 5.0 might show up also...(Ohio thats your que...lol)