Modded 2013 GT500 vs CTS-V Rematch
#1
Staging Lane
Thread Starter
Modded 2013 GT500 vs CTS-V Rematch
Remember this thread:
https://ls1tech.com/forums/street-ra...-vs-cts-v.html
Well owner got car tuned and a couple other things. Car dyno'd IN COUNTRY 591rwhp. My car in country dyno'd 540rwhp.
Here's the results...
Also raced a bone stock 2013 viper and ran head to head with him. Literally neck and neck all the way into my top of 4th.
https://ls1tech.com/forums/street-ra...-vs-cts-v.html
Well owner got car tuned and a couple other things. Car dyno'd IN COUNTRY 591rwhp. My car in country dyno'd 540rwhp.
Here's the results...
Also raced a bone stock 2013 viper and ran head to head with him. Literally neck and neck all the way into my top of 4th.
Trending Topics
#8
TECH Resident
iTrader: (4)
Join Date: Oct 2011
Location: heading South East on Bakalakadaka street
Posts: 819
Likes: 0
Received 1 Like
on
1 Post
DAMN GOOD RUNS. ****** neck and neck with the V looking a bit stronger on the top end.
590whp for the GT500? You've gotta be making more then 540 then, considering weight.
590whp for the GT500? You've gotta be making more then 540 then, considering weight.
#9
Staging Lane
Thread Starter
Also ran a bolt on z06 yesterday and walked away from him.
#10
Staging Lane
Thread Starter
Just so you guys get an idea that last vid when we looked down at speedometers we were at 280kph = 175mph~ lol... On a bumpy third world road... That's why you hear gt500 owner say "verga" which means ****... We were nearing a corner and didn't even notice lol went hard on brakes.
#14
Exactly what i was thinking. **** doesnt add up at all but damn good race either way!
#16
Staging Lane
Thread Starter
BTW that z06 was the cam only one that ran me a while ago. Remember he blew up, well his new setup is bolt on. He still has TONS of power to go. We just tuned it like 3 days ago and he's only on 18 degrees of timing to be safe. He's still traumatized by his other engine so he is holding back throwing more timing at the car but I know he can easily pick up 50rwhp on tune only. He made 448rwhp on the same dyno as us....
GT500 591rwhp
CTSV 540rwhp
bolt on Z 448rwhp
I personally think the dyno is off. I just can't understand how I would neck to neck the gt500 which was shifting good with +3/400lbs and -60rwhp. The GT500 owner seems to think it is torque but I only made 505rwtq on the same dyno. ***** fishy but oh well... V is rolling.
My new pulley and nitrous just got here. I got a 100 shot going in and will go up from 11 to 13-14psi. Car should make north of 850rwhp on race gas. Gonna surprise lots of people.... when they see me purge it will be too late.
#17
Oh that makes sense didn't think it was the same one, ya he should easily be able to pick up some more when it's dialed in. What speed were they doing anyways? Because it looked like it was in the dead spot of 1st and just couldn't make up for it on the 2nd run
#18
Staging Lane
Thread Starter
I was running the gt500 from about a 40-60 roll. I tried a 20 roll and went sideways hard and the z chasing us almost ran into me.
Here's the compilation vid... Look at sec 13... the z TOTALLY stopped his pull and was gonna come back hard..
#19
Just so you guys get an idea that last vid when we looked down at speedometers we were at 280kph = 175mph~ lol... On a bumpy third world road... That's why you hear gt500 owner say "verga" which means ****... We were nearing a corner and didn't even notice lol went hard on brakes.
So would you say you have verga in your ***???? since it means ****???
Bcs where im from, verga means dick....just saying, btw nice V