ported/pullied 03 Cobra vs HCI 370 LQ9 "the rematch"
#63
TECH Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
Well, figure im about 100 lbs heavier now than stock, and that Cobra is a good 150 lbs lighter than stock...probably putting us at a very similar weight now. Putting a FM merge pipe on tomorrow, and will do a FAST at some point too
#67
10 Second Club
iTrader: (14)
So was that a pullied cobra on spray ? Ported and pullied and spray there is a lot left out there lol how much both you guys were spraying ? So many variables you need to fill us in on lol
Cam and stall only as in no Headers, emissions , intake or Lid or Tune? Or is this LS1Tech cam only? Lol
Jk but like I said better we know the set ups better we can judge that race but seems like your car moves out for sure
Cam and stall only as in no Headers, emissions , intake or Lid or Tune? Or is this LS1Tech cam only? Lol
Jk but like I said better we know the set ups better we can judge that race but seems like your car moves out for sure
#68
Teching In
Join Date: Sep 2008
Location: Westland, MI
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
So was that a pullied cobra on spray ? Ported and pullied and spray there is a lot left out there lol how much both you guys were spraying ? So many variables you need to fill us in on lol
Cam and stall only as in no Headers, emissions , intake or Lid or Tune? Or is this LS1Tech cam only? Lol
Jk but like I said better we know the set ups better we can judge that race but seems like your car moves out for sure
Cam and stall only as in no Headers, emissions , intake or Lid or Tune? Or is this LS1Tech cam only? Lol
Jk but like I said better we know the set ups better we can judge that race but seems like your car moves out for sure
#71
TECH Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
Also, here is a quick little vid of last nights events. Greddy on nitrous vs a 2006 HCI GTO with 500 rwhp, then me vs my buddy's 1995 HCI Cobra with a 125 shot and Greddy on the nitrous too. I wasn't spraying on this run because I was wanting to run the White Cobra on motor only. Basically he slaughter us all lol. That's okay cause he and I will be lining up on the sauce real soon
http://www.youtube.com/watch?v=v0jAr...ature=youtu.be
http://www.youtube.com/watch?v=v0jAr...ature=youtu.be
#77
TECH Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
Here is today's race! I just barely tapped the rev limiter in 2nd, and that's where Greddy gets the 1/4 car, but it was dead nuts after that! The FM merger along with starting at a higher rpm (and shifting just a tad higher) made all the difference! The nitrous is another story lol...it didn't kick on until a second later then cut out at like 6k, so I said screw it lol! I WILL get this thing fixed lol
One other thing to mention here...Greddy and I were talking, and we think my total race weight might actually be 50-100 lbs heavier than his at this point. So i'm sure that factors in as well
__________________
One other thing to mention here...Greddy and I were talking, and we think my total race weight might actually be 50-100 lbs heavier than his at this point. So i'm sure that factors in as well
#79
Lol I prefer a legal dragstrip ,and we have a few dragstrips that are close to all of us. I'll race every car in all the videos! Highway runs are okay but sometimes bad things can happen out there on pubic roads. No one as ever got a speeding ticket at the track, or had there car impounded! I issue an open invite to Milan dragway or ulby dragway. I will come to either and we can have a friendly good time. Btw My Z28 has nasty top end with the 3.42's
Last edited by BODUKE; 08-25-2013 at 07:47 PM.