Bolt on 5.0 vs Cam only C5Z
#127
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
#131
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Dumbshit, I'm saying I didn't remove safety equipment and door supports to make my car lighter
Didn't say **** about factory weight, THAT's where my car is lighter. Not my own verjinya hackjob like yours. I could go out and run an 11.8 with this car and you'd eat your words but you'd still create more stipulations to discredit it.
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
Your not gonna go out and run a 11.8 n/a. You'll be lucky to get to a 12.8.
As I said.......*** hurt when a camaro get's near the weight of a fox. If you were smart you would do what the rest of the world is doin and put a LS in that tin can of a chassis.
Who is squirming?
You disqualify anybody's car if it doesn't meet your street car checklist, as dozens of other posters have pointed out as well. You have aftermarket parts on your car, and there are guys on here with stangs that do as well, now I'm not standing behind ANYBODY else's car, that's not me, but you cried when Heater commented about his power level and you just look like an idiot because your **** isn't all OEM either...and it irritates the ***** out of you when they're faster
You're the guy we laugh at when you say a 10 min wheel/tire swap is more racecar than a faceplated transmission ![Rotflmao](https://ls1tech.com/forums/images/smilies2/rotflmao.gif)
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
![Rotflmao](https://ls1tech.com/forums/images/smilies2/rotflmao.gif)
Ask heater about his fp'd trans in his fox. You know the street car with no wipers.......and a Chevy hood.....lmao
I didn't cry about Heater's power. I simply made a truthful comment that he was looking for out of me.
Not very ******* good.
Not really........you would struggle with a solid full bolt on ls1.......in 2014. Last I checked it took more than a head to get down a race track.
#132
***Repost Police***
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Never seen you say **** to anybody that has a H/C/I GM. Who the hell here gives a **** about that besides you?
#133
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Most don't run oe manufacturer cams......but I do. And when I cam my ls7 more than likely it will be with a gm cam.
Intakes can be everywhere. I went clean to 11.1 on a ls6 intake.
#137
TECH Fanatic
iTrader: (9)
Join Date: Apr 2012
Location: Georgetown, Tx
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd say the hype wasn't hype at all. More like production.
#138
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Heater, I like you man, but that is an audacious statement. Overhyped? Well, the LS started in production cars in '97 with a top NA output of 350/345. This reached a height of 405/400 in the end of the gen III engine production by '04. In this WHOLE time ford didn't have A motor to compete with it. In '06 the LS7 came along w/ 505 NA horsepower. Ford FiNALLY created a much heavier competitor in the S/C 5.4 for the Ford GT. The 5.0 is a nice NA motor, but give GM credit here. It took Ford 13 YEARS to have an NA motor to be competitive with the GM NA offerings. Not to mention, 2013 was the first time that Fords top engine offering out powered GM's top engine offering. Even the sun shines on a dogs *** every once in awhile.
I'd say the hype wasn't hype at all. More like production.
I'd say the hype wasn't hype at all. More like production.
#139
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
241's are fine. If notch would've finished his car you might've had a hard time getting away fro a set of 241's. Last time you posted head flow #'s you did it at a lift you can't get to with the furd head.
You're a dumbass. I still have my door bars. Where do you come up with this ****?
Your not gonna go out and run a 11.8 n/a. You'll be lucky to get to a 12.8.
As I said.......*** hurt when a camaro get's near the weight of a fox. If you were smart you would do what the rest of the world is doin and put a LS in that tin can of a chassis.
Last I checked the fp'd t56 don't stop me from goin anywhere.......not even in the snow. But a set of slicks would.
Ask heater about his fp'd trans in his fox. You know the street car with no wipers.......and a Chevy hood.....lmao
I didn't cry about Heater's power. I simply made a truthful comment that he was looking for out of me.
60's????? WTF are you talking about? It took furd till 2011 to out run a ls1.
I didn't discredit it. I said what it is. There's not much ford left there. If you think the sbf is so great then you should use ford parts. I'm putting my money where my mouth is and using gm parts.
What's the plates for in the bottom of your floor?
Not very ******* good.
Not really........you would struggle with a solid full bolt on ls1.......in 2014. Last I checked it took more than a head to get down a race track.
You're a dumbass. I still have my door bars. Where do you come up with this ****?
Your not gonna go out and run a 11.8 n/a. You'll be lucky to get to a 12.8.
As I said.......*** hurt when a camaro get's near the weight of a fox. If you were smart you would do what the rest of the world is doin and put a LS in that tin can of a chassis.
Last I checked the fp'd t56 don't stop me from goin anywhere.......not even in the snow. But a set of slicks would.
Ask heater about his fp'd trans in his fox. You know the street car with no wipers.......and a Chevy hood.....lmao
I didn't cry about Heater's power. I simply made a truthful comment that he was looking for out of me.
60's????? WTF are you talking about? It took furd till 2011 to out run a ls1.
I didn't discredit it. I said what it is. There's not much ford left there. If you think the sbf is so great then you should use ford parts. I'm putting my money where my mouth is and using gm parts.
What's the plates for in the bottom of your floor?
Not very ******* good.
Not really........you would struggle with a solid full bolt on ls1.......in 2014. Last I checked it took more than a head to get down a race track.
![The Judge](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_judge.gif)
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
#140
***Repost Police***
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well most gm h/c/i cars still have gm heads. Most furds don't. Why do you think that is?
Most don't run oe manufacturer cams......but I do. And when I cam my ls7 more than likely it will be with a gm cam.
Intakes can be everywhere. I went clean to 11.1 on a ls6 intake.
Most don't run oe manufacturer cams......but I do. And when I cam my ls7 more than likely it will be with a gm cam.
Intakes can be everywhere. I went clean to 11.1 on a ls6 intake.