Street Racing & Kill Stories Basic Technical Questions & Advice

305 vs 302

Thread Tools
 
Search this Thread
 
Old 07-24-2017, 09:46 AM
  #221  
10 Second Club
Thread Starter
 
big hammer's Avatar
 
Join Date: May 2009
Location: over dere
Posts: 3,428
Received 153 Likes on 105 Posts

Default

I don't know how Hio does it but just a few words and the Br0crew goes into full panic attack lol
Old 07-24-2017, 10:08 AM
  #222  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by big hammer
I don't know how Hio does it but just a few words and the Br0crew goes into full panic attack lol
Nice cape, Mr. White Knight.

PS. Snake's 302 killed your 350 fair and square.
Old 07-24-2017, 10:14 AM
  #223  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,936
Received 425 Likes on 336 Posts

Default

Originally Posted by snake95
So it's my fault that from the factory, my car was slightly lighter? Looks like everyone on the road needs to add ballast to be as heavy as the heaviest car Do you comprehend how ******* ignorant you look? My car was BONE stock. All smog, all everything, zero weight taken out. I even wrote a note on the weight slip for you, if you remember.

Yeah I've heard your "the 350 was at a disadvantage compared to a 305" story before, and I laugh a little more every time I hear it.
So you wanna see if the 30p00 was better as you believe or not? So basically you're saying the 30p00 needs a weight advantage. .....i agree.

His car was stock. But not really. Likely not running as well as stock.

Neither of you left the 15s. Do you know how ignorant you look thinking you bestes a car not running it's best in worse da but yet thinking you had a train on him when you were what......a tenth apart


Fool

Originally Posted by islander033
Have you ever agreed to corrected times?

Have you ever agreed to match race weight?

Have you even raced your cars in the last 2+ years?

How is this about me? Do you how gay you look constantly thinking if me?
Old 07-24-2017, 10:15 AM
  #224  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,936
Received 425 Likes on 336 Posts

Default

Originally Posted by big hammer
I don't know how Hio does it but just a few words and the Br0crew goes into full panic attack lol
Their panties no like being dropped to expose their stinky ******.
Old 07-24-2017, 10:19 AM
  #225  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by HioSSilver
....How is this about me? ...
It's about you because you constantly expect people to do exactly what you refuse to do.

Thus the term hiopocrisy was born.

PS. Pull the blower off your 12s fox! LOL
Old 07-24-2017, 10:23 AM
  #226  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,936
Received 425 Likes on 336 Posts

Default

Not expecting anyone to do anything i wouldn't do. I'm also not beating muh chest about beating a car that likely wasn't performing at it's best. Especially with to stock cars that ended up being closer than he thought.

Now cover that stench up


I'll pull my blower when you just put yours back to oe atmosphere.

Funny thing is i would rather the notch be na. Being it's a furd tho it would no doubt struggle to leave the 13s then
Old 07-24-2017, 10:30 AM
  #227  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by HioSSilver
Not expecting anyone to do anything i wouldn't do. ...
OK! My shelbro vs your hackfish in 2017:

ET VS ET this year.

We DA correct and you match my race weight.



After all, you expected Snake to do this for Hammer.....
Old 07-24-2017, 10:36 AM
  #228  
10 Second Club
Thread Starter
 
big hammer's Avatar
 
Join Date: May 2009
Location: over dere
Posts: 3,428
Received 153 Likes on 105 Posts

Default

Good poast OP
Old 07-24-2017, 10:36 AM
  #229  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,936
Received 425 Likes on 336 Posts

Default

Not a problem. Put the stick blower back on it at the stock 9 or 10 psi. After all.....i didn't change atmospheres and neither did they.

My god that would be a murder. No second power adder either


So you agree the 30p00 needs a advantage .
Old 07-24-2017, 10:41 AM
  #230  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by HioSSilver
Not a problem. Put the stick blower back on it at the stock 9 or 10 psi. After all.....i didn't change atmospheres and neither did they.

... .
So...you can do power mods but I can't? I don't expect you to put your car back to stock power. LOLOLOL

Hiopocrisy
Old 07-24-2017, 10:44 AM
  #231  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,936
Received 425 Likes on 336 Posts

Default

So are you saying you have no other mods besides a blower swap? I'm sure you have exhaust, intake, tune, race breaks and meight reduction. But yet you want me to add weight

HYPOCRISY at its best right ttthhheeeerrrr



But wait.....why is this about me again?

Oohhh....because i penetrate you and you can't get me off your mind
Old 07-24-2017, 10:49 AM
  #232  
10 Second Club
Thread Starter
 
big hammer's Avatar
 
Join Date: May 2009
Location: over dere
Posts: 3,428
Received 153 Likes on 105 Posts

Default

On behalf of the Crew I'll take one for the teem and beet DD, for free. As soon as he gets here
Old 07-24-2017, 10:51 AM
  #233  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by HioSSilver
So are you saying you have no other mods besides a blower swap? I'm sure you have exhaust, intake, tune, race breaks and meight reduction. But yet you want me to add weight

...
You have ext, intake, lighter brakes, internal engine mods, FP trans, ford rear based diff, extreme weight reduction....ect.

I only have bolt ons.

I tried to get down to your race weight but I just can't bring myself to hack saw my car up. lol and

So you need come up to my weight and correct DA to make it fair.

You wanted other to do it....

HYPOCRISY
Old 07-24-2017, 10:52 AM
  #234  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by big hammer
On behalf of the Crew I'll take one for the teem and beet DD, for free. As soon as he gets here
Same deal for you. Match my race weight and DA correct the runs. MMMkay?
Old 07-24-2017, 10:54 AM
  #235  
10 Second Club
Thread Starter
 
big hammer's Avatar
 
Join Date: May 2009
Location: over dere
Posts: 3,428
Received 153 Likes on 105 Posts

Default

Originally Posted by islander033
Same deal for you. Match my race weight and DA correct the runs. MMMkay?
I can only go by this years slips
Old 07-24-2017, 10:59 AM
  #236  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,936
Received 425 Likes on 336 Posts

Default

Originally Posted by islander033
You have ext, intake, lighter brakes, internal engine mods, FP trans, ford rear based diff, extreme weight reduction....ect.

I only have bolt ons.

I tried to get down to your race weight but I just can't bring myself to hack saw my car up. lol and

So you need come up to my weight and correct DA to make it fair.

You wanted other to do it....

HYPOCRISY
Ok peeps......islander is master of hypocrisy here. Look how he whines about weight even tho we were gonna be at the same weight

You have race brakes i don't. I have stock replacement brakes. I still have abs to. In the end you have more extreme wr than i do. We would both only have bolt ons. I see no issue here.

Have your trans fp'd already or stop crying about it.

Originally Posted by islander033
Same deal for you. Match my race weight and DA correct the runs. MMMkay?
Stip it till you win it!

How bout you match his atmosphere. Mmmkay?
Old 07-24-2017, 11:00 AM
  #237  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by big hammer
I can only go by this years slips
I'm good with that. I did say 2017.

Let me know the results of your race weight, I'll do the same.

Then you can put the ballast anywhere you want.
Old 07-24-2017, 11:00 AM
  #238  
Teching In
 
MACHXLR8's Avatar
 
Join Date: Dec 2006
Location: North Carolina
Posts: 1
Received 2 Likes on 2 Posts

Default

The car talk mixed with the gay **** always cracks me up. All the best threads seem to have that.
Old 07-24-2017, 11:02 AM
  #239  
7 Second Club
 
islander033's Avatar
 
Join Date: Jul 2013
Location: Crossfield, AB
Posts: 239
Received 313 Likes on 242 Posts

Default

Originally Posted by HioSSilver
Ok peeps......islander is master of hypocrisy here. Look how he whines about weight even tho we were gonna be at the same weight

You have race brakes i don't. I have stock replacement brakes. I still have abs to. In the end you have more extreme wr than i do. We would both only have bolt ons. I see no issue here.

Have your trans fp'd already or stop crying about it.



Stip it till you win it!

How bout you match his atmosphere. Mmmkay?
Hahahaha....expecting people to do what you won't...HYPOCRISY

I'm only asking you to do what you expected Snake to do. Nothing more or less.

It's ok if you're scared. After all you've been retired from racing for nearly 3 years.
Old 07-24-2017, 11:10 AM
  #240  
10 Second Club
iTrader: (8)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 5,936
Received 425 Likes on 336 Posts

Default

So I've agreed to your terms but you won't agree to mine. That's all you had to say hypocrite.


Quick Reply: 305 vs 302



All times are GMT -5. The time now is 09:21 PM.