That would be defined as SBE. Your car is no longer SLB at that point.

 

Well I am not racing with a limp dick.

 

So I should just go around telling people that I'm "stock bottom end" and that's it. Sounds like something a shady Furd toolshed would do.

 

Come on guys. If the Bro was indeed making 465 rwhp then the race went as expected. You can make that with a 5.7 but you need some nice heads and a FAST or better, most likely. These GT350 intakes are new and apparently very effective. no shame in that loss.

 

Unless if you have a built bottom end. Then no.

 

Good post. Gm ballickers just can't take the L sometimes. Even when they take the L

 

lol, you must be new here.

 

You can do that cam only with an ls1

 

You mean like when the Furd ballickers couldn't take the tune only 6gen raping that FBO cammed 5.br0? And I mean RAPING.

 

Perhaps a solid roller with 345/310 duration with .987/.812 lift and 87 LSA? Cam only FTW!

 

Mike Norris, owner of 5.0 said he's ready whenever you are. A 2013 auto cobra jet 5.0 also jumping on the fun, lmk what you wana do.

 

That's what I'm talking about. Gopro time!

 

470 has been done and I think that could even be beat

 

Hammer's bolt on car makes 420-430rwhp.

 

That Br0 clearly needed maintenance.

 

Fixed.

His motah done ate itself.

 

All your puppy kicking are belong to mike!

 

Well I'm not hanging out with guys that have a hard on.
Idk....this car has a gt350 mani. It really doesn't seem much better if any than the other manis at actually accelerating the car.

 

Car is in West palm Beach, we can set it up, u down?

 

I sure hope that Mike's full sausage HCI/wr car can beat a lil ol bolt on 5.bro.