Epic SRK B/S thread of 2019
#5241
7 Second Club
#5242
TECH Fanatic
iTrader: (55)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](https://cimg2.ibsrv.net/gimg/ls1tech.com-vbulletin/1080x607/fb_img_1579874273882_ebb63301007a8d63896c5a9676adb6477281e6df.jpg)
I gained 2 tenths and 2MPH going with a Pro Stock Chris set up over the Chris 1313 on a 104 lid set up with 102TB and 101 MAF. Speed Density with a good tune was another MPH and tenth. You have another tenth and MPH with flex set up on e85 as well which is not hard to do.
DOUGYBox might be worth a tenth over this set up since it flows so much more due to inner diameter size increase. I have yet to try mine or even install it
Last edited by Mike Morris; 01-24-2020 at 08:17 AM.
The following users liked this post:
JayplaySS (01-24-2020)
#5243
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Embarrassing is your notch. Going slower than actual 03 Cobras with less mods which weigh 1k pounds more launching with an IRS. I thought 2020 would be a new start for you, you can put the past behind you where you fucked up 4 motors. Guess not. RIP LS1, LS7, LS6, DOHC 4.6.
I mean only a bitch has to lie nonstop. I don't have to make up **** on you.
Please splain how i blew up any of those engines.
only if you think lower map readings are faster than higher map readings.
#5244
7 Second Club
#5248
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Looks like noone sells the pro stock style intake anymore. :\
#5250
7 Second Club
#5252
7 Second Club
#5254
7 Second Club
The following users liked this post:
S8ER95Z (01-24-2020)