Jtm2085

iTrader: (1)

Hio, we talked before about breathers on the valve covers instead of the pcv system. Do you still have pics of your set up?

HioSSilver

iTrader: (8)

I just had some little cheapy filters stuck on my pcv tubes. Run them to the front of the motor or you'll get a smell inside the car. I'll look for a pic.

HioSSilver

iTrader: (8)

There ya go. It was nothing fancy.

HioSSilver

iTrader: (8)

Lies don't destroy **** el'retardo.

I much prefer the truth. No arguing that.

2010CamaroS

so why do you argue against me when I say you never ran a 1.2 60' 10.7 in the quarter mile?

AnnivSS

If his car is together, why not just go do it again and shut everyone up? Seems like a simple solution to me.

HioSSilver

iTrader: (8)

Actually you're arguing. I'm not. I'm stating facts.....you're lying that it didn't after it was proved possible.

Oh come you didn't come out of your *** closet when zoobitch's 1/2 car did a .9xx 60?? Since you have such problems with ****. But you didn't. So you just a **** starting bitch.

you think it matters after everything has been changed?

islander033

That was a few motors to change out, but since it's together go run it k?

HioSSilver

iTrader: (8)

Oh look....your **** is still bleeding.

More bs....i backed up my 10sec run that day. You weren't even there when your 1/2 car made the run. And since you claim that my 60 is the issue with it....then your 60 is the issue to. So shut your dick massagers bitch.

I think it's great really. In that one instance it outted you faggs for the bitches you are beyond any doubt. Hillaryious to the core.

snake95

Wow rug getting stepped on in here as usual.
What's the timer at, for this most recent refresh after engine #3 was put to rest? Like a year or some ****? Yikes. Also, why does islander033 trigger you so badly? Your typing gets even worse (I know, right, like how is that possible) and you flood the page with incoherent gibberish. Take a deep breath

Chris25

iTrader: (1)

The CFM breathers are nice that's what I used when I deleted my PCV.

HioSSilver

iTrader: (8)

i own you bitches. That's just how it is. I'm why you're here.....ask your moms.

AnnivSS

Waiiiiitttt. So the 10.7 was on an old setup? This whole time you have been arguing about an irrelevant time? NIce.

HioSSilver

iTrader: (8)

I haven't been....they have been. So yea thats how stupid they are. I'm just correcting their lies.

I said a long time ago everything has changed.

zz4camaro1980

If the new setup is faster then a 1.2 60ft should be even easier. Can't wait to see it!

Chris25

iTrader: (1)

Anus and his side chick seem super triggered over a 1.2 60 ft but question how come no one ever brings up MAC HCI 6.0 Fbody making less power than a stock car and running worse seems pretty hypocritical.

HioSSilver

iTrader: (8)

Not really.....more power doesn't mean the 60" will be faster. Traction and control is what the 60 is all about.

it really fucked them in there *** with a train when the old ls6 went 10s. Then after the same combo on phils bolt on ls3 vette went 10.5 on traction limited passes they have simply imploded.

Notice how they weave and bob to avoid anything about zoobitch 1/2 car .9xx 60". But it hasn't been .9xx 60" again......hhhmmmm.

zz4camaro1980

Glad we agree! If less power and running worse are synonymous then more power should...

What else are you upgrading that would make the 60ft worse?

HioSSilver

iTrader: (8)

How bout you werkin on zoobitch about his fabled .9xx 60 car. Then get back to me. How bout trying not to be a **** instead of doing what comes naturally for you.

zz4camaro1980

Was that .9xxx 60ft run also his best et that he constantly brags about?