E55 vs ATS-V Coupe
10-25-2019, 08:38 PM
#1
On The Tree
Thread Starter
E55 vs ATS-V Coupe Headed home from work, and had the go pro rolling as usual. As i turned I seen a blacked out ATS-V waiting to go straight. I'm about a mile ahead, and see bright lights catching me fast. So I call my wife and tell her I gotta gap this foo before I come home lol. He catches me and gets next to me and starts goosing it at me and him and his buddy start laughing. So I downshift and grab 1st at 40(I knew it would nose over at 40 but was too low for 2nd). I leave TC on since I'm back on street tires and it was around 50° out. I honk it off and he hit it. I spun until about 60 or so with my TC light giving me hell. As I'm pulling away, I weve bye to return their doucheyness laughs lol. Needless to say, they didn't want to go again. Run was 40-150ish
The following users liked this post:
07BlackSS (10-25-2019)
10-25-2019, 10:29 PM
#3
On The Tree
Thread Starter
The following users liked this post:
07BlackSS (10-26-2019)
10-26-2019, 04:16 AM
#5
On The Tree
Thread Starter
10-26-2019, 08:12 AM
#6
7 Second Club
3V ftw!
The following users liked this post:
07BlackSS (10-26-2019)
The following users liked this post:
07BlackSS (10-26-2019)
Trending Topics
The following users liked this post:
07BlackSS (10-26-2019)
The following users liked this post:
07BlackSS (10-26-2019)
10-26-2019, 12:43 PM
#10
On The Tree
Thread Starter
I would've loved to hear the convo in that car afterwards lol
Make 3vs great...ever
Thanks Jay
Thats 90% of the races I get around here so...they got the unfortunate pleasure of being in the intro
Make 3vs great...ever
Thanks Jay
Thats 90% of the races I get around here so...they got the unfortunate pleasure of being in the intro
10-26-2019, 07:07 PM
#12
On The Tree
Thread Starter
10-27-2019, 12:59 PM
#14
On The Tree
Thread Starter
The following users liked this post:
07BlackSS (10-28-2019)
The following users liked this post:
07BlackSS (10-28-2019)
10-28-2019, 07:09 PM
#17
TECH Enthusiast
Headed home from work, and had the go pro rolling as usual. As i turned I seen a blacked out ATS-V waiting to go straight. I'm about a mile ahead, and see bright lights catching me fast. So I call my wife and tell her I gotta gap this foo before I come home lol. He catches me and gets next to me and starts goosing it at me and him and his buddy start laughing. So I downshift and grab 1st at 40(I knew it would nose over at 40 but was too low for 2nd). I leave TC on since I'm back on street tires and it was around 50° out. I honk it off and he hit it. I spun until about 60 or so with my TC light giving me hell. As I'm pulling away, I weve bye to return their doucheyness laughs lol. Needless to say, they didn't want to go again. Run was 40-150ish
LOOK OP!
i'm just about getting sick of watching your 4100 lb MERC, "NO LUBE *** RAPE COUNTLESS CARS!!!!!!!"
this is just about enough.
when is this going to stop?
u need to be humbled.....imo....
stop by huntsville alabama and gets you some losses..... once i fix the power loss from teh toon and MAF not working right. and the power loss from running this bitch like i stole it for 115,000 miles.
good job OP. i SO wish i bought the E55 i was looking at instead of teh worthless ******* COYOTE.
i need a rebuild an a TERBO!
luckily for ME....i'm not a Goddamned loser named HIO who could NOT rebuild a coyote to save his life and i CAN!
again OP congrats on a killer car and setup. i really do wish you lived here, and i could help you fab a turbo for that car like i'm doing to a insanely talented BMW specialist here in Huntsville.
my new engine will be 10:1 compression, the cams i have now, self ported and flowed gen1 coyote heads(yes HIO, i've been porting cylinder heads for a living for 30 years) a simple forward facing y-pipe and 80mm turbo. Shaun AT AED Tooned.
The following users liked this post:
07BlackSS (10-28-2019)
The following users liked this post:
07BlackSS (10-28-2019)
10-28-2019, 09:31 PM
#19
On The Tree
Thread Starter
Yeah my car REALLY hates 40 rolls. Even when it doesn't spin(not very often) the shift is so fast it hangs for half a second and then shifts hard. That's why I prefer(other than digs)35 or 45. Thanks Yosh!Low 12*
LOOK OP!
i'm just about getting sick of watching your 4100 lb MERC, "NO LUBE *** RAPE COUNTLESS CARS!!!!!!!"
this is just about enough.
when is this going to stop?
u need to be humbled.....imo....
stop by huntsville alabama and gets you some losses..... once i fix the power loss from teh toon and MAF not working right. and the power loss from running this bitch like i stole it for 115,000 miles.
good job OP. i SO wish i bought the E55 i was looking at instead of teh worthless ******* COYOTE.
i need a rebuild an a TERBO!
luckily for ME....i'm not a Goddamned loser named HIO who could NOT rebuild a coyote to save his life and i CAN!
again OP congrats on a killer car and setup. i really do wish you lived here, and i could help you fab a turbo for that car like i'm doing to a insanely talented BMW specialist here in Huntsville.
my new engine will be 10:1 compression, the cams i have now, self ported and flowed gen1 coyote heads(yes HIO, i've been porting cylinder heads for a living for 30 years) a simple forward facing y-pipe and 80mm turbo. Shaun AT AED Tooned.
i'm just about getting sick of watching your 4100 lb MERC, "NO LUBE *** RAPE COUNTLESS CARS!!!!!!!"
this is just about enough.
when is this going to stop?
u need to be humbled.....imo....
stop by huntsville alabama and gets you some losses..... once i fix the power loss from teh toon and MAF not working right. and the power loss from running this bitch like i stole it for 115,000 miles.
good job OP. i SO wish i bought the E55 i was looking at instead of teh worthless ******* COYOTE.
i need a rebuild an a TERBO!
luckily for ME....i'm not a Goddamned loser named HIO who could NOT rebuild a coyote to save his life and i CAN!
again OP congrats on a killer car and setup. i really do wish you lived here, and i could help you fab a turbo for that car like i'm doing to a insanely talented BMW specialist here in Huntsville.
my new engine will be 10:1 compression, the cams i have now, self ported and flowed gen1 coyote heads(yes HIO, i've been porting cylinder heads for a living for 30 years) a simple forward facing y-pipe and 80mm turbo. Shaun AT AED Tooned.