my ss goes down against a 97 lt1 z28
#21
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Are you sure the Cobra had that much done to it. I could understand if the Cobra was near stock. If he did have pully, tune, and exhaust, I would think the guy driving the Cobra sucked at driving. Just my 2c. Not trying to be a dick or anything. Good death Btw.
#22
Launching!
Join Date: May 2003
Location: Canadian West Coast
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Friends of mine with LT1s mostly have hotcams. I can think of a few offhand. With just the cam and full bolt ons, they dyno 330-340 rwhp and run 13 flat at the track at 112 or so (may be a bit better). Those running LT1 ported heads (stock ported) are around 370 and low 12's, if I recall correctly.
My friends have a tendency to refer to their ported LT1 heads as "just stock LT1 heads, not LT4s". They tend to ignore the fact that they are ported heads and downplay them saying they're ONLY Lt1 heads.
My friends have a tendency to refer to their ported LT1 heads as "just stock LT1 heads, not LT4s". They tend to ignore the fact that they are ported heads and downplay them saying they're ONLY Lt1 heads.
#23
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Gloveperson
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
He has a point with the 03 Cobra thing. An 03 Cobra with those mods is like 450 RWHP and even with the horsepower he claims, he would need a lot more than that (unless it was like a 0-60 and the 03 Cobra had the stock IRS). Nice death no matter what though!
-Todd
#24
Administrator
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by WhiteTXMach
An 03 Cobra with the mods he said is going to have well over 450 rwhp.
#25
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by unit213
Negative. 450rwhp is about right. 465-470rwhp is on the high end. That's about as much power as an '03 Cobra can make without internal work, a ported blower, or nitrous.
#26
Administrator
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by WhiteTXMach
Uhhhhhhh I know you have a Cobra and I dont, but my friend with just pulley/cai/tune/xpipe and catback put down 470/480. He says this Cobra was more modded than this.
CAI
Full exhaust (headers,xpipe,catback)
Those mods will get you about 460rwhp. Like I said, 465-470rwhp is on the high end. I can make a dyno read 600rwhp. Don't let numbers throw you. I know 30+ guys with these cars and my buddy's shop has done hundreds. A ported blower with those mods will get you 500rwhp +/- 10rwhp. A lower pulley and the mods above will generate more torque, but no more power.
This whitecamaross guy is full of
![turd](https://ls1tech.com/forums/images/smilies2/turd.gif)
#27
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by unit213
2.76 pulley with all idlers
CAI
Full exhaust (headers,xpipe,catback)
Those mods will get you about 460rwhp. Like I said, 465-470rwhp is on the high end. I can make a dyno read 600rwhp. Don't let numbers throw you. I know 30+ guys with these cars and my buddy's shop has done hundreds. A ported blower with those mods will get you 500rwhp +/- 10rwhp. A lower pulley and the mods above will generate more torque, but no more power.
This whitecamaross guy is full of![turd](https://ls1tech.com/forums/images/smilies2/turd.gif)
CAI
Full exhaust (headers,xpipe,catback)
Those mods will get you about 460rwhp. Like I said, 465-470rwhp is on the high end. I can make a dyno read 600rwhp. Don't let numbers throw you. I know 30+ guys with these cars and my buddy's shop has done hundreds. A ported blower with those mods will get you 500rwhp +/- 10rwhp. A lower pulley and the mods above will generate more torque, but no more power.
This whitecamaross guy is full of
![turd](https://ls1tech.com/forums/images/smilies2/turd.gif)
#30
TECH Apprentice
Thread Starter
Join Date: Oct 2003
Location: miami, florida
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey man, i dont know why all this hate. the bottom line is that if he didnt know how to drive he got smoked either way. what am i supposed to do? am i supposed to bust out a questionaire and ask him if he can drive? do you know how to change gears? do you know how to powershift? what does blinking hazards mean? how old are you? blah blah blah.. like i said in another post before, a chase is a race and if you get next to me and rev your motor and punch it, i am gonna punch it and if you let off thats your bad. if the kid didnt know how to drive then thats his problem. like i said before i dont consider myself a good driver. i mod to make up for my lack of driving skills and i am man enough to admit it.