350z 15psi vs 06 viper VIDEO
10-14-2006, 10:55 AM
#61
Banned
iTrader: (3)
Join Date: Mar 2006
Location: Upstate NY
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 25psi
There's a pretty big difference between 130+plus traps and 113 traps!
Having alot of HP, or more Hp doesnt mean you have the faster car.
10-14-2006, 11:07 AM
#62
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: htown
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Typically when someone is making over 100rwhp more than you do it does, especially going from a roll. The two cars are very similar in weight. The Z06 weighs about 3150 and 350z weighs 3260(thats how much my car weighed)
What I am saying to Fadi is, the person he ran does not make 550rwhp or else he wouldn't have run 113mph traps. My best mph was 120 with 412rwhp. So if he where running 113, he making more like 350-360rwhp. I dont want you to think that I am making any excuses for the 350, becuase clearly he got the **** beat out of him but I just want him to realize that he was not making the claimed hp out of his car.
What I am saying to Fadi is, the person he ran does not make 550rwhp or else he wouldn't have run 113mph traps. My best mph was 120 with 412rwhp. So if he where running 113, he making more like 350-360rwhp. I dont want you to think that I am making any excuses for the 350, becuase clearly he got the **** beat out of him but I just want him to realize that he was not making the claimed hp out of his car.
10-14-2006, 11:37 AM
#63
Originally Posted by 25psi
Do a write up on how much it would cost to build a complete longblock LS1 plus a turbokit, fuel, gauges, clutch, suspension, bolts.etc...... Anyone can take the cheap way out and build just a shortblock. I could have done the same thing:
350z:
Shortblock-3000
fuel-1500
clutch-1000
Nitrous-800
350z:
Shortblock-3000
fuel-1500
clutch-1000
Nitrous-800
THE FBODY WILL PUT DOWN FASTER TIMES! AND MAKE BETTER POWER NUMBERS!
Turbo FBODY VS TURBO Z
Game Over!
10-14-2006, 11:43 AM
#65
Have you ever raced in the 1/4 in your life?
You have a Dyno Qeen and a Roll racer
O wait you cant, Because MR2s like to destory themselfs when they start to 60foot hard.
If you think thats BS well then talk to JeakleNHide over on the MR board........He was making less power than you, and going through drive train parts like water!
You have a Dyno Qeen and a Roll racer
O wait you cant, Because MR2s like to destory themselfs when they start to 60foot hard.
If you think thats BS well then talk to JeakleNHide over on the MR board........He was making less power than you, and going through drive train parts like water!
10-14-2006, 11:53 AM
#67
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: htown
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slick1851
Have you ever raced in the 1/4 in your life?
You have a Dyno Qeen and a Roll racer
O wait you cant, Because MR2s like to destory themselfs when they start to 60foot hard.
If you think thats BS well then talk to JeakleNHide over on the MR board........He was making less power than you, and going through drive train parts like water!
You have a Dyno Qeen and a Roll racer
O wait you cant, Because MR2s like to destory themselfs when they start to 60foot hard.
If you think thats BS well then talk to JeakleNHide over on the MR board........He was making less power than you, and going through drive train parts like water!
You are a complete idiot. Learn how to spell you illiterate dipshit! I've talked to Jekleandhyde plenty of times, infact, I sold him my sheetmetal intake manifold.
You do know that the more power you make, the chances are you will break something eventually. Luckily I havent encountered any problems since owning the car.
10-14-2006, 12:27 PM
#69
12 Second Club
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody ever notice that while he continues to talk **** about how fast 350z's can be, he is ALWAYS having to make excuses for 350Z's that just run like **** for what they have? It's kinda like a trend at this point, seems like he is making excuses for poor running 350Z's more than he gets to talk ****! I was bustin out laughing when he started coming out with the excuses after racing me, prob had 10-11 excuses to why my heavy *** boat with 400rwhp ran him dead even and even won quite a few. It's all good though, he was a cool dude and all. When is ur car gonna be done? I wanna peice of that Nissan.
10-14-2006, 01:08 PM
#70
TECH Fanatic
iTrader: (7)
Join Date: Jan 2006
Location: San Jose, CA
Posts: 1,607
Likes: 0
Received 0 Likes
on
0 Posts
not true check out LS1joe's car-
02 Z28 M6 SOM, Heads & Cam 1.400 10.172@132.59
Quickest and fastest NA Heads & Cam in Texas
Suspension by MADMAN
Highest HP Stock Bottom End Heads and Cam 518.19rwhp/396.15rwtq
02 Z28 M6 SOM, Heads & Cam 1.400 10.172@132.59
Quickest and fastest NA Heads & Cam in Texas
Suspension by MADMAN
Highest HP Stock Bottom End Heads and Cam 518.19rwhp/396.15rwtq
10-14-2006, 01:21 PM
#71
Originally Posted by 25psi
You are a complete idiot. Learn how to spell you illiterate dipshit! I've talked to Jekleandhyde plenty of times, infact, I sold him my sheetmetal intake manifold.
You do know that the more power you make, the chances are you will break something eventually. Luckily I havent encountered any problems since owning the car.
You do know that the more power you make, the chances are you will break something eventually. Luckily I havent encountered any problems since owning the car.
OMG
You got me, damn your so smart but yet try and explain your cars short comings only to be shoot down time and time again.
If you look those posts were made very fast, im sorry for not taking more time to give a ****
10-14-2006, 01:23 PM
#72
Originally Posted by Sprayed1998
Does anybody ever notice that while he continues to talk **** about how fast 350z's can be, he is ALWAYS having to make excuses for 350Z's that just run like **** for what they have? It's kinda like a trend at this point, seems like he is making excuses for poor running 350Z's more than he gets to talk ****! I was bustin out laughing when he started coming out with the excuses after racing me, prob had 10-11 excuses to why my heavy *** boat with 400rwhp ran him dead even and even won quite a few. It's all good though, he was a cool dude and all. When is ur car gonna be done? I wanna peice of that Nissan.
Thats pretty sad, all that money dumped into his junk and he couldnt walk away from a simple LS1.
He can SMOKE PROCHARGED VIPERS
But cant Beat a simple LS1
10-14-2006, 01:37 PM
#74
11 Second Club
iTrader: (8)
Join Date: Apr 2006
Location: Kansas
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Whats a stock viper do.. low 12s?
If we're talking about cost effective.. I'm in 11s for less than $7,000 including the car N/A...and no not high 11s. I'd like to see this 350z run in a quarter. **** if he's ever around I'd race him for fun.
Oh and no it's not a stripped car, it's a full leather interior car with working AC that I drive daily.
How about you 25psi, what do you run in the quarter? You can sure post up some high dyno numbers but no actual times (that i've seen, at least)
If we're talking about cost effective.. I'm in 11s for less than $7,000 including the car N/A...and no not high 11s. I'd like to see this 350z run in a quarter. **** if he's ever around I'd race him for fun.
Oh and no it's not a stripped car, it's a full leather interior car with working AC that I drive daily.
How about you 25psi, what do you run in the quarter? You can sure post up some high dyno numbers but no actual times (that i've seen, at least)
10-14-2006, 01:39 PM
#75
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: htown
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slick1851
Thats pretty sad, all that money dumped into his junk and he couldnt walk away from a simple LS1.
He can SMOKE PROCHARGED VIPERS
But cant Beat a simple LS1
He can SMOKE PROCHARGED VIPERS
But cant Beat a simple LS1
I only had a turbo kit at the time I ran Bitchboy sprayed1988. Stock exhaust,cats, at 7psi of boost and we were back and fourth the whole night. Ask him why did he have to take the passenger out of his car and put it in mine. Ask him why he refuses to run th deuce for money. Hes a ***** plain and simple. Tell him to run me for 500 in the next 3 weeks when my 350z is done. Bet you he wont.
10-14-2006, 01:42 PM
#76
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: htown
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FlashLCD33
Whats a stock viper do.. low 12s?
If we're talking about cost effective.. I'm in mid 11s for less than $7,000 including the car N/A... I'd like to see this 350z run in a quarter. **** if he's ever around I'd race him for fun.
Oh and no it's not a stripped car, it's a full leather interior car with working AC that I drive daily.
If we're talking about cost effective.. I'm in mid 11s for less than $7,000 including the car N/A... I'd like to see this 350z run in a quarter. **** if he's ever around I'd race him for fun.
Oh and no it's not a stripped car, it's a full leather interior car with working AC that I drive daily.
What does the cost of the car have to do with anything? The amount spent on your car is purely subjective. Why do people get mad becuase people can afford to do something they cant.
10-14-2006, 01:45 PM
#77
TECH Regular
Join Date: Mar 2006
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 25psi
http://videos.streetfire.net/video/a...580035f079.htm
Here is a vid of my boys 350z vs an 06 viper. This was done on 15psi(low boost 128mph traps). Now this is the way a 350z should run if boosting 15psi(in response to the 350z vs c6 Z06).
Here is a vid of my boys 350z vs an 06 viper. This was done on 15psi(low boost 128mph traps). Now this is the way a 350z should run if boosting 15psi(in response to the 350z vs c6 Z06).
Wholy **** where's the turbo lag power under the curve shizzl fizzl!?! What happened!?!? It defied all scientific bench racing!
10-14-2006, 01:46 PM
#78
Originally Posted by 25psi
What does the cost of the car have to do with anything? The amount spent on your car is purely subjective. Why do people get mad becuase people can afford to do something they cant.
Only people like you, who dump tons of money into cars say things like this.
You know whats sad, all that money and the fruits of you labor arent that great.
You also have no 1/4 mile times
10-14-2006, 01:51 PM
#80
TECH Regular
Join Date: Mar 2006
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OdessitPashka
BigBri has an amazing car, lots of respect for it, but he spent over 30k on it to make it that fast... I mean everyone likes to waste their money differently and IMO modding cars is one of the worst ways to spend money, but putting as much money into the car as the car cost is ******* retarded. Especially if he's only gonna make 600whp...
I love this excuse. Let's compare your mighty ls1, 600whp...how much is a turbo system or supercharger gonna cost you guy's alone, nevermind the clutch or tranny and drivetrain part's, and the internals and engine work and fuel you'll need to support that power (edit: and suspension parts). I've seen good forced induction system's run about 10k on your cars, and clutch's up to 3k. Don't kid yourself ls1's are expensive as hell to mod and the money add's up quick. Granted I would rather mod the ls1 than the 350z but this hobby cost money and you can get ls1's these days for 10-15k, you think people won't spent atleast twice as much as that modding them, come back to reality then, it add's up quick and I know a lot of people here are guilty of spending shitloads of money into their car, tell them they shoulda bought a viper.
And yes I agree, modding cars is the worst way to spend money, but oh well what are you gonna do, it's an addiction, but doesn't matter what car it is it'll all add up so don't kid yourself with this excuse. It will usually cost you almost as much if not almost twice as much as you got the car for, if not you probably have nothing to brag about cause your not breaking enough parts/not going fast enough.
Last edited by jimmy169; 10-14-2006 at 02:17 PM.