what's an average WS6 run?
#61
FormerVendor
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
See, what is funny is that i don't drive a ricer. Rather i drive a 2002 NBM WS6 that went 13.36@104.33 last wednesday (on a shitty 2.09 60'). I never said Integra would run down LS1's with his mods either, and highly doubt that he would hang with any stock WS6 that has a competent driver with his mods.
Hey Dragon, how much have you spent on all your mods??
TEA stage II heads- $1799
Comp Cam (what are the specs anyways?)- ~$300
LS1 motorsports lid- $89
K & N filter- $40
Granatelli NOS MAF (a.k.a. POS, stocker is good to 500 RWHP)- $299
BBK 80mm TB- $389
Ported LS6 oil pump- $129
MAC mid-lenghts (again, why?? these engines breathe best with full length headers)- ~$450
OR Y-pipe- $150
Cut-out- $40
That's $3685 right there, with out the tranny work, and i know a converter and cooler will run you around another grand, plus your hardened internals, shift kit, 3.73's, edit tuning, and nitrous will put you at if not beyond the $6000 mark. So you are telling me that for $6000 of work on a B18c5 you won't go 12's??
Also, what all chasis work have you done?
I never said that Integra would hang with you with your mods, i doubt he'd even hang with me with only my lid and cut-out. But none the less, if he takes the time to buld a motor that is respectable for what it is then maybe you could pull your head out of your *** and realise that there are more fast cars out there than just LS1's.
Six grand can take a stock LS1 from mid 13's to high 10's. I would also bet six grand could take a Type R integra from high 14's to high 12's. Ricer's **** me off, but fast imports i do respect, there is a difference.
Hey Dragon, how much have you spent on all your mods??
TEA stage II heads- $1799
Comp Cam (what are the specs anyways?)- ~$300
LS1 motorsports lid- $89
K & N filter- $40
Granatelli NOS MAF (a.k.a. POS, stocker is good to 500 RWHP)- $299
BBK 80mm TB- $389
Ported LS6 oil pump- $129
MAC mid-lenghts (again, why?? these engines breathe best with full length headers)- ~$450
OR Y-pipe- $150
Cut-out- $40
That's $3685 right there, with out the tranny work, and i know a converter and cooler will run you around another grand, plus your hardened internals, shift kit, 3.73's, edit tuning, and nitrous will put you at if not beyond the $6000 mark. So you are telling me that for $6000 of work on a B18c5 you won't go 12's??
Also, what all chasis work have you done?
I never said that Integra would hang with you with your mods, i doubt he'd even hang with me with only my lid and cut-out. But none the less, if he takes the time to buld a motor that is respectable for what it is then maybe you could pull your head out of your *** and realise that there are more fast cars out there than just LS1's.
Six grand can take a stock LS1 from mid 13's to high 10's. I would also bet six grand could take a Type R integra from high 14's to high 12's. Ricer's **** me off, but fast imports i do respect, there is a difference.
POLL: How many people think QkikDix is a ricer and doesn't know ****?
13.36? You're ******* slow dude. Until you're faster than me, I don't want to hear your stupid arguments about power and speed.
OWNED.
#62
TECH Apprentice
Join Date: Apr 2003
Location: Katy, Tx
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Integra will u post this http://www.gmvsford.com/forums/images/smilies/ban.gif
#64
TECH Enthusiast
Join Date: Feb 2003
Location: Longview, TX
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
damn guys, he just came in here asking some questions and didnt even say anything about his car being fast untill yall jumped up his ***. he hasnt even posted in a while, he's prolly not even on the board now, DROP IT.
#65
TECH Junkie
Join Date: May 2003
Location: its fucking cold
Posts: 3,050
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, 13.36 in the middle of summer, on a 2.09 60' with a lid and a cutout is slow. And how do you Integra isn't as fast as he says hes is?? It has been previously stated that an old **** in his mid-life crisis driving a vette would easily be a 15 second car, especially on teh street where traction is a bigger issue than at the track. And the same goes for a Z06, maybe the the one he raced was a 2001, and the driver missed a gear. Oh wait, I forgt, we LS1 drivers are flawless, we never make a mistake when racing.
#66
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
not with 6k it isn't, sadly..
u all must've forgotten that torque lacking FWD cars not great launchers.
and yeah everyone kinda jmped on him, he's not Bullit or anything.
u all must've forgotten that torque lacking FWD cars not great launchers.
and yeah everyone kinda jmped on him, he's not Bullit or anything.
#67
FormerVendor
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, 13.36 in the middle of summer, on a 2.09 60' with a lid and a cutout is slow. And how do you Integra isn't as fast as he says hes is?? It has been previously stated that an old **** in his mid-life crisis driving a vette would easily be a 15 second car, especially on teh street where traction is a bigger issue than at the track. And the same goes for a Z06, maybe the the one he raced was a 2001, and the driver missed a gear. Oh wait, I forgt, we LS1 drivers are flawless, we never make a mistake when racing.
#68
TECH Junkie
Join Date: May 2003
Location: its fucking cold
Posts: 3,050
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd be a little more ashamed of a heads and cam with a converter and gears that only runs low 12's than i would be of a full weight TA that runs 13.3's with only my two mods. Last time i checked most A4's with gears, full bolt on's, and a stall (as you have) were in the low 12's, and that's on stock heads and cam.
And where exactly is this supposed Vin Diesel poster that is in my room? i'm looking around, but can't seem to find it.
And where exactly is this supposed Vin Diesel poster that is in my room? i'm looking around, but can't seem to find it.
#69
TECH Senior Member
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd be a little more ashamed of a heads and cam with a converter and gears that only runs low 12's than i would be of a full weight TA that runs 13.3's with only my two mods.
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
#71
TECH Fanatic
iTrader: (1)
Join Date: Jan 2003
Location: Sarasota, FL
Posts: 1,476
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
And where exactly is this supposed Vin Diesel poster that is in my room? i'm looking around, but can't seem to find it.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#72
TECH Fanatic
iTrader: (1)
Join Date: Jan 2003
Location: Sarasota, FL
Posts: 1,476
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
h(improper punctuation)ey stupid mario(comma) oops (comma)i(capitalization) mean "super" mario(comma) you got owned. Look guys i(capitalization)'ve read this whole thing and i(capitalization) believe (that) the kid beat the cars he said. Also(comma)(beginning a sentance with a prepostition) this guy qwikfix has said nothing that isn't true. He's not one of those ricer Ls(improper capitalization)1 owners (being a dumbass),(no comma needed) that talk alot of crap like dragonZ28. Hey dragon(comma) shut the hell up. Seriously(fragment). Later suckers (fragment and being a dumbass). hahahhahahhahhaha (not even going to touch this one).
bullitt =
(logical fallacy)
Tsk, tsk, bullitt, gramatically owned once again.
bullitt =
![The Pimp](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_pimp.gif)
Tsk, tsk, bullitt, gramatically owned once again.
#73
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Integra,
Where are you located?
I'm sure someone on this forum can set up a race with you!
I don't believe in dyno # or track time slips....
(over the Net)I could show my 87 LX 10 sec pass and say its my 2001 TAs time slip.
So lets line'em up with something! Enough Said!
Where are you located?
I'm sure someone on this forum can set up a race with you!
I don't believe in dyno # or track time slips....
(over the Net)I could show my 87 LX 10 sec pass and say its my 2001 TAs time slip.
So lets line'em up with something! Enough Said!
#74
Teching In
Join Date: Sep 2003
Location: Long Beach, CA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
QiwkFix you are a dumb ***, so low 12s isnt much faster than your precious 13.36? Do you know home much as second is? In a real drag race a full second= a complete asskicking. Which, im sure you are very familar with being that you and your car lick *****.
#75
TECH Fanatic
iTrader: (1)
Join Date: Jan 2003
Location: Sarasota, FL
Posts: 1,476
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
QiwkFix you are a dumb ***, so low 12s isnt much faster than your precious 13.36? Do you know home much as second is? In a real drag race a full second= a complete asskicking. Which, im sure you are very familar with being that you and your car lick *****.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#76
TECH Junkie
Join Date: May 2003
Location: its fucking cold
Posts: 3,050
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I never said i could run with dragon's heads and cam car, i am well aware that a 12.05 is a full second and then some quicker than my 13.36. I never said his 1.31 seconds quicker than myself wasn't much faster than my times.
How exactly have i been owned by a comeback to an arguement that i didn't make?
How exactly have i been owned by a comeback to an arguement that i didn't make?
#77
TECH Senior Member
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Oh, wait, a 12.05 isn't a low 12??
Talking about price is for ricers. Your car is slower than his, period. It doesn't matter if you spent 1 dollar and he spent 2 mil, he's faster than you. period.
#78
TECH Junkie
Join Date: May 2003
Location: its fucking cold
Posts: 3,050
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I never denied that his car isn't faster than mine. And if you want the i think that would actually be a 12.000.
******* bottom of a bottomless pit low 12 second quarter