View Poll Results: What shocks do you use for drag racing only?
AFCO
2
22.22%
QA1
5
55.56%
Strange
2
22.22%
Voters: 9. You may not vote on this poll
Shocks/Suspension For Drag Racing only?
#1
10 Second Club
Thread Starter
iTrader: (12)
Join Date: Jun 2005
Location: Arlington, Texas (Dallas Area)
Posts: 805
Likes: 0
Received 1 Like
on
1 Post
Shocks/Suspension For Drag Racing only?
What is your experience with these shocks (double adj.) and post pics if you got 'em shown with how they look on launch and/or going down the track. What TA do you run (shorter or regular length) and how much did a drag-launch "anti-roll" bar (rear) help you if you got one?
Afco
QA1
Strange
Afco
QA1
Strange
#3
LS1Tech Premium Sponsor
iTrader: (5)
They are all really good for drag racing but if money is no issue the afco's would be my first choice then strange and QA1's. The rear anti roll bar helps tremendously. If the car is inconsistant or twists up really bad the antiroll bar will help out. Our full length arm is good for street/strip car. Our trak pak or extreme torque arms are good for the 9 second and faster car. If you have any questions about our parts or need any help getting the car dialed in please give us a call. Our tech dept is available mon-fri 8:30am till 6:00 pm est.
Last edited by BMR Tech2; 12-09-2008 at 09:25 AM.
#4
10 Second Club
iTrader: (15)
Join Date: Nov 2001
Location: St. Michael, MN.
Posts: 4,519
Likes: 0
Received 0 Likes
on
0 Posts
I use the single adjustable QA1's on all four. The rears work great, but the fronts suck ***. Both are leaking and need to rebuilt. I use the BMR drag bar on the rear and Spohn tunnel mount TA. If I had the extra cash I would go with Strange. Here's a launch pic on 16" DR's.
BTW - You will get a better response if you post this in the Drag Racing Tech forum.
BTW - You will get a better response if you post this in the Drag Racing Tech forum.
Last edited by DrkPhx; 11-07-2008 at 10:07 PM.