LS1FIRE

iTrader: (1)

Hello i am going to purchase a lower control arm a panhard bar.Should i go ahead and buy and install these products or should i wait for a torque arm?If Just get the lower control arm and panhard bar will i still get the tration gains? THANKS

wrencher

iTrader: (2)

If you drive the car on the street I would highly suggest a set o sub frame connectors.

MINEZQKR

or lower control arm's takes away that annoying wheel hop

1RawTA

iTrader: (1)

Im actually ordering the lower control arms and panhard bar in a little bit, then i am going to save up for the torque arm but ill probally do that over the winter

skippytheloon

iTrader: (14)

If your car has T-Tops, get subframes ASAP. I think that the lcas are the most noticeable cheap handle mod, but I would get subframes before anything cause these cars twist pretty nasty without them. any brand would help but the SLPs or G2 (with Xbrace) are the best.....better yet, weld in a roll cage!

trackbird

iTrader: (4)

I agree about STB's and SFC's. But if you are doing suspension, you can install LCA's and a PHB with no problem with the stock torque arm. It will be just fine.