93-02 camaro pinto rack setup from paracing!
10-18-2010, 08:30 PM
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Jun 2009
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
93-02 camaro pinto rack setup from paracing! ok guys i bought a kemember from paracing! so i decided to go with a manual rack there pinto style .
here r my questions?
1. do i have to buy there bump steer kit? or
2. will my stock tie rods work?
3. also will my steering shaft work! or do i have to buy the one from paracing!
i need help cuz i only bought the rack! wiil and stock parts fit!
here r my questions?
1. do i have to buy there bump steer kit? or
2. will my stock tie rods work?
3. also will my steering shaft work! or do i have to buy the one from paracing!
i need help cuz i only bought the rack! wiil and stock parts fit!
12-06-2010, 08:06 PM
#2
FormerVendor
iTrader: (7)
Join Date: Jul 2004
Location: Seymour,IN
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Rack Parts You will have to use the Pa bumpsteer kit and also the steering shaft kit. You can make your own shaft kit up but it's going to cost you more than the PA kit.
