John98LS1

iTrader: (6)

what are these for then????

http://www.slponline.com/view_product.asp?P=80046

chaman

iTrader: (5)

I got mine from GMparts direct. The ones I got are of a white rubber material.

1LOMARO

I used the set off an 89 RS Camaro I was parting out... swapped perfect to my 98. Just a suggestion if your looking to save a few bucks...

rob69zombie

iTrader: (7)

They're factory spacers for WS6's and SS'. They just hang the bump-stop a little further down.

libertyforall1776

iTrader: (2)

We just had this discussion where Sam chimed in -- that the spacers should be removed with stock bumpstops for more travel on SSs and that the Z28 bumpstops were more desirable due to the material...

John98LS1

iTrader: (6)

soo i bought these for nothing lol

rob69zombie

iTrader: (7)

Good to know about the spacers. I'm going to pick up some poly's and now I know not to re-install the spacers.

trik396

iTrader: (4)

Can anyone tell me why the SS and WS6 models used the aluminum spacer? Were the stops shorter on those models?

z28bryan

iTrader: (7)

Yeah, they had blunt/squared off bumpstops compared to the typical z28 triangular ones.

mikestypes

The SS/WS6 bumpers with spacers are the same overall height as the Z28 bumper. The SS bumpers alone are shorter, but stiffer compared to the Z28 stops.

philippe boisson

I got the jeep one for $18 for my 2002 trans am .they are perfect if you remove the lip from the spacers.I save $100.

1LOMARO

I used a set off of a junk third gen I have... OEM rubber and bolted up with no issues. Probably a $5 item at a boneyard.

98ws6blk

What would be the best Bump Stop setup for drag racing?
Poly vs Rubber/Foam ?
Hard vs Soft?
with vs without spacer?

czechnuts

I think I destroyed mine do to soft lowering springs. I need to find some that are affordable. Not sure about anyone else but I from time to time have passengers! lol Takes no weight to bottom out. Any sugjestions? Also I thought I had saw a pic of this bump stop replacement? Anyone still have it?