NoCoolName

So I called Moser and asked about the Hardware to mount the Torque arm to there 12 Bolt and was told they use all Stock stuff. From my other thread I've learned that the Moser mounts to the Torque Arm diffrently so I'm guessing Stock stuff to Moser is the Stock Hardware that would come with the 12 Bolt??

01wssick

iTrader: (27)

pretty sure the 4 bolts to mount it are 1/2" coarse thread at 1" in length. Can buy from hardware store, I had to. my stock torque arm mounted fine to my moser 12 bolt.

sedanman

iTrader: (10)

Moser 12 bolts use four bolts rather then two big thru bolts.

NoCoolName

Thanks for the Info, I'm putting in the UMI Torque Arm just wanted to get new Hardware while I'm at it..

Thanks, this much I gathered from my other thread but I was lookin for the size of those 4 bolts. I think 01wssick just answered my question..

indyboom

iTrader: (11)

all you know is how to **** people out of money.. SCAMMER....

01wssick

iTrader: (27)

mhhm

UMI Performance

iTrader: (77)

Since you are using an aftermarket torque arm like ours get bolts that are a 1-1/2" long. I hope that helps!

yellowdawg

this guy is a creep.. dont buy from