2kblackgtp

iTrader: (12)

So I have had this problem since I got my car, with it going back on the road soon I feel I should address the issue.

The brake pedal is stiff at about 1 inch down, fluid looks clean, replaced the pads and rotors with stoptech brakes and ceramic pads. It seems like slowing down at highway speeds it's just not slowing down like it should and it starts to feel a little crunchy if I start to brake harder, and the abs is off so it's not the pedal pushing back at me. Anyone have any ideas?

Blu99T/A

iTrader: (5)

A hard brake pedal in my experience usually means the booster is shot.

armkneez8

iTrader: (1)

My issue is like yours but worse. Booster is leaking and its time to change it along with the master cylinder. Safety is very important!

2kblackgtp

iTrader: (12)

So who makes some good replacement parts? I don't want to just go picking the cheapest brand on rockauto or something. Should I go ahead and change the MC while I'm at it? I don't have any leaks in the system as far as I can tell

Blu99T/A

iTrader: (5)

I would replace the booster only, with the brand of your choice. I try to get the one with the best warranty as I like to only pay for things once.

The Batman

iTrader: (4)

Vacume leak? this happened to me once and i noticed a leak in the main vacume hose. Braked like new after i fixed it

Blu99T/A

iTrader: (5)

This is possible as well.