AutoX -Koni Setting advice needed
#1
Teching In
Thread Starter
Join Date: Jun 2008
Location: Alexandria, VA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
AutoX -Koni Setting advice needed
Looking to do my first autoX tomorrow and I wanted some advise on Koni Setting for this kind of driving. I have an 01 Camaro SS with rebound adjustable only Konis.
I understand this is base on driver style but just looking for a starting point. I'd hate to set them too firm.
Any help is appreciated!
I understand this is base on driver style but just looking for a starting point. I'd hate to set them too firm.
Any help is appreciated!
#2
TECH Apprentice
Join Date: Feb 2006
Location: Bridgewater, Ma
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
I have Koni SA and run 3/4 firm in the front and 1/2 in the back. Start with a setup you feel you like and get used to your car if this is your first event. Don't fix the car fix the driver.
#3
TECH Senior Member
Looking to do my first autoX tomorrow and I wanted some advise on Koni Setting for this kind of driving. I have an 01 Camaro SS with rebound adjustable only Konis.
I understand this is base on driver style but just looking for a starting point. I'd hate to set them too firm.
Any help is appreciated!
I understand this is base on driver style but just looking for a starting point. I'd hate to set them too firm.
Any help is appreciated!
Don't drive overly aggressive, slow into the corner-fast out, and have fun!
#4
LS1TECH Sponsor
iTrader: (41)
I see you have my springs and bars on there. Sorry I don't know your name, but if you are a customer mine (and I assume maybe you are given the other parts), then call me and I'll get you helped out.
Where are you autoxing tomorrow? And are you aware there is one in Waldorf MD on Sunday run by Autocrossers Inc? I'll be there on Sunday with my Corvette.
Where are you autoxing tomorrow? And are you aware there is one in Waldorf MD on Sunday run by Autocrossers Inc? I'll be there on Sunday with my Corvette.
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
#5
Teching In
Thread Starter
Join Date: Jun 2008
Location: Alexandria, VA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the advise Gents...been downstairs adjusting and getting the car ready. I had an idea of how to set them and you guys just reassured me.
#6
Teching In
Thread Starter
Join Date: Jun 2008
Location: Alexandria, VA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I see you have my springs and bars on there. Sorry I don't know your name, but if you are a customer mine (and I assume maybe you are given the other parts), then call me and I'll get you helped out.
Where are you autoxing tomorrow? And are you aware there is one in Waldorf MD on Sunday run by Autocrossers Inc? I'll be there on Sunday with my Corvette.
Where are you autoxing tomorrow? And are you aware there is one in Waldorf MD on Sunday run by Autocrossers Inc? I'll be there on Sunday with my Corvette.
I'll be doing my first tomorrow with Capital Driving Club out at the Stadium in Bowie, MD. I did see the one in Waldorf but I'd rather do it on Sat. I'll prob go be a spectator in Waldorf on Sun though.
Hopefully all goes well tomorrow and I can make it a habbit.
#7
Launching!
I usually run the rear full soft and the front 3 sweeps from full soft...i could go a touch stiffer on the rear so i will try that at my next event...
you have adjustability so don't be afraid to experiment...
Have fun...it will make you faster...Guaranteed!
you have adjustability so don't be afraid to experiment...
Have fun...it will make you faster...Guaranteed!