Relocation Brackets with Strange 12 bolt
Thread Starter
Registered User
Joined: Feb 2014
Posts: 13
Likes: 0
From: MN
Relocation Brackets with Strange 12 bolt I bought some Bolt-On BMR Fabrication Control Arm Relocation Brackets. Will they work with my Strange 12 bolt?
SUSPENSION MODIFICATIONS:
Eibach Pro Kit Lowering Springs
Lakewood Rear Lower Control Arms
Granatelli Motorsports Signature Series Panhard Bar
Edelbrock Torque Arm (Nonadjustable)
BMR Boxed Subframe Connectors
SUSPENSION MODIFICATIONS:
Eibach Pro Kit Lowering Springs
Lakewood Rear Lower Control Arms
Granatelli Motorsports Signature Series Panhard Bar
Edelbrock Torque Arm (Nonadjustable)
BMR Boxed Subframe Connectors
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Yes I believe they are the same as a 10 bolt. The ones for Moser are slightly different IIRC. BMR's website should tell you.
Last edited by 01ssreda4; Feb 10, 2014 at 08:33 PM.
They may. We usually only recommend the bolt on brackets for stock 10-bolt rears. However, the only variable is how the shock mounting location is positioned in relation to lower control arm mounting point. If it is in the same relation as the 10-bolt mounts then yes they will. I would test fit one and see. You just need to see if that mounting tab will line up with the shock mount hole when it is bolted in the original LCA hole.
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Since BMR wasn't any help I found it. Mine are Spohn, and that's where the designation for the difference of Moser was. Since Strange uses the original bracket molds from AAM (the original manufacturer for GM of stock 10 bolt rear ends), its safe to say yes it absolutely should work without issue. See here for the difference in brackets.
http://www.spohn.net/shop/1998-2002-...tion-Brackets/
http://www.spohn.net/shop/1998-2002-...tion-Brackets/
Yeah, I would have thought the Strange would be the truest bolt in of any rearend... as they use the axle tube template from the AAM 10-bolt. So anything designed for the stock rearend will work flawlessly on the Strange.
Registered User
Joined: Dec 2013
Posts: 1
Likes: 0
quick question. i atill have a 10 bolt rear end ".373's" , tubular poly control and adjustable panhard bar . car is not lowered nor will be so my question is will i benifit from relocation brackets???? btw i do not race or "give it hell".. its a fair weather driver and at times i drive a little spirited
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Since BMR wasn't any help I found it. Mine are Spohn, and that's where the designation for the difference of Moser was. Since Strange uses the original bracket molds from AAM (the original manufacturer for GM of stock 10 bolt rear ends), its safe to say yes it absolutely should work without issue. See here for the difference in brackets.
http://www.spohn.net/shop/1998-2002-...tion-Brackets/
http://www.spohn.net/shop/1998-2002-...tion-Brackets/