6 Piston CTS V calipers
#21
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The rotors are 10+ Camaro rotors. The rotor no matter which brand you use will need to be machined a bit to fit. The center hole on the camaro rotor are a tad smaller diameter.
You can use the Z06 rotors without machining, but then the brake pad wont cover the whole rotor and will wear unevenly.
You can use the Z06 rotors without machining, but then the brake pad wont cover the whole rotor and will wear unevenly.
#22
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
~520 Calipers
~14 Caliper Hardware
~80-120 Rotors
~120 Brake lines
~80 Brake Pads
+Honing Brake Rotors (~100)
+Misc bolts/brake fluid/decals/paint
Last edited by blaine123; 03-20-2015 at 06:05 PM.
#30
Launching!
iTrader: (3)
Join Date: Feb 2005
Location: Alabama
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Awesome job! Can I ask why you didn't go with the 14.6in rotors from the ZL1?
Do the pads hang over much? can you post a pick of the top of the caliper with everything assembled?
I know the 14in 2010 rotors fit perfectly under the 4-piston brembo's. So shouldn't the 6-piston brembo caliper go with the 14.6in rotors that come on the ZL1?
Am I missing something? does the ZL1 have a different spindle?
Do the pads hang over much? can you post a pick of the top of the caliper with everything assembled?
I know the 14in 2010 rotors fit perfectly under the 4-piston brembo's. So shouldn't the 6-piston brembo caliper go with the 14.6in rotors that come on the ZL1?
Am I missing something? does the ZL1 have a different spindle?
#32
Launching!
iTrader: (3)
Join Date: Feb 2005
Location: Alabama
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I looked at the pics again, and it looks like the piston is just outside the rotor, which means the pads will be over as well. I bet the 14.6in fits better.
I think there is a disadvantage to this setup vs the 14in 4-piston.
The 6-piston caliper actually has slightly less piston area=less force when using the same lever arm(14in rotor). Also you are using less pad..... Whereas the 14in 4-piston is using all of the rotor, all of the pad, and the caliper produces more force. I know its hard to believe looking at that massive 6-piston caliper, but the total piston area in the 4-pot is larger.
So in the end I think you'll have less brake force, and less fade resistance.
Somebody tell me if I'm missing something here.
I think there is a disadvantage to this setup vs the 14in 4-piston.
The 6-piston caliper actually has slightly less piston area=less force when using the same lever arm(14in rotor). Also you are using less pad..... Whereas the 14in 4-piston is using all of the rotor, all of the pad, and the caliper produces more force. I know its hard to believe looking at that massive 6-piston caliper, but the total piston area in the 4-pot is larger.
So in the end I think you'll have less brake force, and less fade resistance.
Somebody tell me if I'm missing something here.
Last edited by Phoenix64; 03-29-2015 at 03:58 PM.
#34
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Awesome job! Can I ask why you didn't go with the 14.6in rotors from the ZL1?
Do the pads hang over much? can you post a pick of the top of the caliper with everything assembled?
I know the 14in 2010 rotors fit perfectly under the 4-piston brembo's. So shouldn't the 6-piston brembo caliper go with the 14.6in rotors that come on the ZL1?
Am I missing something? does the ZL1 have a different spindle?
Do the pads hang over much? can you post a pick of the top of the caliper with everything assembled?
I know the 14in 2010 rotors fit perfectly under the 4-piston brembo's. So shouldn't the 6-piston brembo caliper go with the 14.6in rotors that come on the ZL1?
Am I missing something? does the ZL1 have a different spindle?
SS Camaro Rotor fits Perfect with the 6 piston calipers, and with a larger rotor you would more than likely have to go 19" wheels. I have ZERO over hang on the rotors with the pads. Match up perfect.
#36
Launching!
iTrader: (3)
Join Date: Feb 2005
Location: Alabama
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ha, I knew it, that pad rotor fit is pure automotive ****!
Most places I find list that rotor as 14.55(370mm) or 14.6(same as the ZL1). A few list it as 15in, but I wonder if they're just rounding up?
Most places I find list that rotor as 14.55(370mm) or 14.6(same as the ZL1). A few list it as 15in, but I wonder if they're just rounding up?