93v8clone

installed my manual rack last night alonh with my k frame and lower cntrl arms , my question is the tie rod end bolts don't fit all the way thru . are we supposed to drill em open a tad more or ream the whole spindle open ? yes they have the bump steer lit on em as well . im also highly impressed the way it all fit with zero swearing lol

ssvert99

iTrader: (26)

The hole in the factory spindles are tapered, the top is like 11mm. The bolt you have should be a 1/2 x 3.5". The MWC exclusive tapered adapter that comes with the package will slip into the bottom of the hole with taper up, the top 1/2 of the hole will need to be drilled out to 1/2".