LT1BADZ

iTrader: (1)

Any sponsors sell a 4L80e Torque arm relocation/trans crossmember for a 97 Fbody?

LT1BADZ

iTrader: (1)

Looks like Midwest Chassis might make one???

SuperSport01

Since I can't find any LT1, 4l80e swap, long torque arm relocation crossmembers... I'll say giving Midwest Chassis a call would be a good idea.

BMR Sales2

iTrader: (40)

With the way the floorboard is designed on the 93-97 cars there is so little room with a 4L80E that you really can't do a torque arm relocation crossmember. This the reason we only sell the crossmember without the relocation mount for the torque arm and the fact that nobody else builds one as far as know.

We have quite a few LT1 4L80E guys that use our new BMR tunnel mounted torque arms along with our 4L80E conversion crossmember (TCC008).

Jose93z28

iTrader: (3)

Sorry to bring this back from the dead but I just ran across it and I wanted to share that I bought a crossmember for 98-02 camaro by accident and I have a 93 with a 4l80e and modified it to make it work, I knw space is limited but its possible my friend welded new brackets and we made it work.

SuperSport01

^ That turned out really nice Jose93.

MidwestChassis2

iTrader: (1)

I know it isn't much help for you right now but we are looking into possibly making a long torque arm for a 4l80. However most customers that have purchased torque arms from us that have a 4l80 transmission needed a short arm for their combination over a long arm.

So they purchased a tunnel mount torque arm and a conversion crossmember.

LT1BADZ

iTrader: (1)

I'll keep an eye out and ready to buy, if/when you guys make one. Looking to have the car done by summer.