Moog problem solver horizontal bushing pic request

Reply Subscribe

Thread Tools

Search this Thread

May 7, 2018 | 04:52 PM

TheNutDriver

Thread Starter

TECH Apprentice

iTrader: (1)

Joined: Sep 2016

Posts: 322

Likes: 3

From: Leicester, United Kingdom

Moog problem solver horizontal bushing pic request

Hi can anybody post a picture of a Moog problem solver horizontal front lower control arm bushing installed please?

Thanks.

May 15, 2018 | 08:32 PM

The Alchemist

UNDER PRESSURE MOD

iTrader: (19)

Joined: Nov 2001

Posts: 10,813

Likes: 15

From: Doylestown PA

I'm in a similar situation. I'm looking to replace the front upper and lower control arm bushings, and wondering what the best option is.

May 16, 2018 | 02:37 AM

TheNutDriver

Thread Starter

TECH Apprentice

iTrader: (1)

Joined: Sep 2016

Posts: 322

Likes: 3

From: Leicester, United Kingdom

I have them already, but im searching for the source of a suspension squeak and I have concerns that they are incorrectly fitted into then cobtrol arms!

May 16, 2018 | 07:57 PM

lees02WS6

TECH Fanatic

iTrader: (5)

Joined: Mar 2004

Posts: 1,882

Likes: 281

From: Lansdale, PA

I have them installed, one of the moog front's was deformed, meaning that the inner sleeve was pushed in. I couldn't get the arm to line up, took me a bit to figure it out, and ended up going back to the store and getting a replacement. I don't have a pic of it in my collection, but I can go take a pic of the arm now.

Other than that, unless they were torqued down pre-loaded, or they don't have enough torque on them, they shouldn't squeak.