Suspension & Brakes Springs | Shocks | Handling | Rotors

Ridetech impressions

Thread Tools
 
Search this Thread
 
Old 08-05-2018, 11:03 AM
  #1  
Teching In
Thread Starter
 
spirit1411's Avatar
 
Join Date: Nov 2009
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default Ridetech impressions

I had been meaning to post a sort of review for a while now and will follow up with photos when time allows. I wanted discuss my rather fantastic experience thus far with my Ride Tech Coil Over shocks .
First let me say, I had been running on older model shocks that were, l as it turns out leaking on me. Driving on the old shocks even on day 1 was pretty bad. I remember wondering if this is what performance suspension was supposed to feel like? (though this was at least partially remedied with different spring rates it never entirely fixed the issue. )
Now the Ride Tech shocks. I ordered TQ remotes for the front with a heavier spring rate and HQ in the rear. for the remote reservoirs installation we had them mounted in the engine bay, for ease of access.
The Camaro Rides like a different animal all together, my dash used to rattle at freeway speed and it no longer does. Car soaks up bumps amazingly well. I have also found that the car seems to respond to small adjustments made in the shock settings. I can take a very tight corner which used to result in the rear stepping out . I do not experience this anymore, as well as the fact that nose dive has been dramatically reduced. Lastly I find it ironic but the Camaro seems to launch harder and put its power down now for straight line traction. It had trouble doing this before on old suspension .
Old 08-05-2018, 11:13 AM
  #2  
Teching In
Thread Starter
 
spirit1411's Avatar
 
Join Date: Nov 2009
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default



mounted to strut tower brace.
Old 08-06-2018, 03:47 PM
  #3  
TECH Senior Member
iTrader: (1)
 
sjsingle1's Avatar
 
Join Date: Feb 2010
Location: Fort Worth TX
Posts: 6,498
Received 215 Likes on 176 Posts

Default

i know there is a hose there somewhere.....
Old 08-06-2018, 04:16 PM
  #4  
Teching In
Thread Starter
 
spirit1411's Avatar
 
Join Date: Nov 2009
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default

Not the best photo but does demonstrate the mounting arrangement . I will try to get more as soon as time allows.
Really feels like a vast improvement to me and those whom I have taken out in the car!
Old 08-07-2018, 01:56 AM
  #5  
TECH Senior Member
iTrader: (1)
 
sjsingle1's Avatar
 
Join Date: Feb 2010
Location: Fort Worth TX
Posts: 6,498
Received 215 Likes on 176 Posts

Default

do you have the rears too ?

nevermind....saw that you do...

Last edited by sjsingle1; 08-07-2018 at 11:42 AM.
Old 08-07-2018, 11:40 AM
  #6  
Launching!
 
David_viny's Avatar
 
Join Date: Jun 2008
Location: Maine
Posts: 254
Likes: 0
Received 0 Likes on 0 Posts

Default

Nice! What spring rates did you end up with?
Old 08-07-2018, 11:52 AM
  #7  
Teching In
Thread Starter
 
spirit1411's Avatar
 
Join Date: Nov 2009
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by David_viny
Nice! What spring rates did you end up with?
In the Front 600 and in the back 200. 12 inch spring Hyper Co.
The only gripe I have if I can really think of one is that the shock adjuster is at the top of the body and hard to reach. I may eventually mount them inverted for easier **** access.
Old 08-07-2018, 11:58 AM
  #8  
Teching In
Thread Starter
 
spirit1411's Avatar
 
Join Date: Nov 2009
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default

I should also say Ride Techs Customer Service is Grade A + the triples were custom valved. Sent the Dyno sheet with the shocks as well which i thought was pretty cool ! A rep called me and discussed what I would be doing with the car and then they put them together . The process took about a week and a half and they were in contact with me promptly whenever I had a question.
Old 08-07-2018, 06:30 PM
  #9  
TECH Senior Member
iTrader: (1)
 
sjsingle1's Avatar
 
Join Date: Feb 2010
Location: Fort Worth TX
Posts: 6,498
Received 215 Likes on 176 Posts

Default

is that bracket on the strut bar fabbed by you ?

my son is needing new shocks so pointing him in the ridetech direction....




All times are GMT -5. The time now is 05:26 AM.