Need Pics of KBDD installed
Thread Starter
Joined: Jan 2003
Posts: 2,503
Likes: 19
From: Minnesota Corn Fields
Thats what I was thinking but how would you get the frame to be straight before welding, when using a drive on lift? Since most cars don't sit level on the suspension. There are many cases where people have seen a 1/4 to 1/2 inch difference in height from drivers side to pass side.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
Joined: Jan 2003
Posts: 2,503
Likes: 19
From: Minnesota Corn Fields
How come those don't look like any of the pictures that the sponsors have?
TXAgZ28 What was the part number for those?
There are two part numbers for LT1's and LS1's
TXAgZ28 What was the part number for those?
There are two part numbers for LT1's and LS1's
Thread Starter
Joined: Jan 2003
Posts: 2,503
Likes: 19
From: Minnesota Corn Fields
nharrison those part numbers don't come up on the Year One website. Thats not important I guess, but does your driver's side angle in towards the motor in the front like the passenger side or are they the same as the picture shown at the begining of this thread? Also do yours have the two tabs that weld to the rocker panels as shown?